Company News

Littelfuse, Inc.

8755 W. Higgins Rd., Chicago, IL, 60631, US

  • 773-628-1000
  • 800-522-7697

Marketing:
Rhonda Stratton
Marketing Communications Manager
USA
Phone: 773-628-0644
E-mail this person

Engineering:
Chad Marak
Product Manager, PLED
USA
E-mail this person

Share Like Tweet Add Email

Latest New Product News from
Littelfuse, Inc.

Electrical Equipment & Systems, Electronic Components & Devices

TVS Diodes target automotive applications.

September 25, 2014

With peak pulse power dissipation ratings of 1,500 W and 3,000 W, respectively, Series TPSMC and TPSMD protect sensitive electronic equipment from voltage transients induced by load dump and other transient voltage events. AEC-Q101 qualified products help automotive power system pass 1, 2a, 2b, 3a, 3b, and 5b surge tests operationally as specified by ISO7637-2. Housed in standard DO-214AB package, Series TPSMC and TPSMD offer standoff voltage ranges of 10–77 V and 10–43 V, respectively. Read More

Electrical Equipment & Systems, Electronic Components & Devices

TVS Diode Array protects fragile ICs from ESD.

September 12, 2014

Integrating 2 channels of low capacitance steering diodes and zener diode, SP3014 Series can safely absorb repetitive ESD strikes above maximum specified in IEC61000-4-2 international standard without performance degradation. Dynamic resistance of 0.04 Ω offers designers clamping device capable of protecting sensitive ICs against electrical transients. Presenting 0.5 pF of loading capacitance, SP3014 Series is suitable for high-speed signal lines such as USB 2.0, USB 3.0, and 1Gb Ethernet. Read More

Electrical Equipment & Systems, Electronic Components & Devices

TVS Diode Array protects differential data lines.

August 14, 2014

Housed in 3.0 x 2.0 mm µDFN-10 package, Model SP2574NUTG protects differential data lines from ESD, CDE, EFT, and lightning-induced surge damage. Device can protect up to 4 channels or 2 differential pairs up to 40 A and 30 kV ESD. Low capacitance of 3.8 pF from each I/O to ground, low dynamic resistance of 0.13 Ω, and low clamping voltage make product suitable for protecting high-speed data interfaces, such as 1 GbE applications found in notebooks, switches, and servers. Read More

Electrical Equipment & Systems, Electronic Components & Devices

TVS Diode Arrays dissipate 8 A of induced surge current.

July 21, 2014

Constructed with silicon diodes, unidirectional SPHV and bidirectional SPHV-C Series 200W Discrete TVS Diode Arrays provide ESD protection up to ±30 kV. Units can safely absorb repetitive ESD strikes above maximum level of  IEC61000-4-2 international standard without performance degradation. With SOD882 packages, AEC-Q101 qualified devices are suited for replacing 0402-sized multilayer varistors in applications such as automotive electronics, LED lighting modules, and portable instrumentation. Read More

Electronic Components & Devices, Electrical Equipment & Systems

TVS Diode Array increases automotive electronics reliability.

July 3, 2014

AEC-Q101 qualified SM24CANA Series protects automotive Controller Area Network (CAN) Bus from damage due to ESD, electrical fast transient (EFT), and other overvoltage transients. With low dynamic resistance of 0.7 Ω typ and low capacitance fo 11 pF typ, this 200 W TVS Diode Array (SPA® Diodes) absorbs repetitive ESD strikes above max level specified in IEC61000-4-2 (±8 kV) without performance degradation and dissipates 3 A of surge current with minimal clamping voltages. Read More

Electronic Components & Devices, Green & Clean, Electrical Equipment & Systems

IGBT and Rectifier Diode Modules come in diverse package designs.

May 23, 2014

Intended for power control applications, Half-Bridge Circuit IGBT Modules come in S, D, or WD packages with ratings up to 1,200 V and 600 A. Minimized loss promotes efficiency and switching speed, while short circuit capability reduces protection requirements. With ratings up to 1,800 V and 200 A, Phase Leg and Common Cathode Circuit Rectifier Diode Modules come in S and A packages. Reverse recovery loss promotes operational efficiency, and forward voltage allows for reduced heat dissipation. Read More

Electrical Equipment & Systems

Surge Protection Modules suit LED lighting applications.

April 17, 2014

Constructed with thermally protected varistors, Models LSP05 and LSP10 protect outdoor LED fixtures with max lightning surge current ratings of 10,000 A and 20,000 A, respectively. LSP05 Module is configured with parallel connections, while LSP10 Module is available with either parallel or series connections. Built-in thermal disconnect function provides additional protection from catastrophic failures and fire hazards. Both provide real-time indication when SPD module needs to be replaced. Read More

Electronic Components & Devices

AEC-Q200 Compliant Varistor protects automotive electronics.

March 28, 2014

With max peak surge current rated up to 5 kA (8/20 µsec pulse), radial-leaded varistors of AUMOV™ Series protect sensitive vehicle systems from voltage transients induced by load dump, jump starts, and other events. Phenolic coating option accommodates demands of harsh, under-hood environments with operating temperatures up to 125°C. Available in 5, 7, 10, 14, and 20 mm disc sizes, varistors have 16–50 Vdc range and also serve vehicle passenger compartment applications. Read More

Other Company News from
Littelfuse, Inc.