Company News

Dytran Instruments, Inc.

21592 Marilla St., Chatsworth, CA, 91311, USA

  • 818-700-7818

General Information:
Kaitlin Mitchell
Phone: 818-700-7818
E-mail this person

Latest New Product News from
Dytran Instruments, Inc.

Sensors Monitors & Transducers

3493A Series IEPE Triaxial Accelerometers are housed in titanium case.

Apr 19, 2017

Available in models with 5mV/g and 10mV/g sensitivities, 3493A Series IEPE Triaxial Accelerometers feature shielded cable design with 4-pin, ¼-28 threaded connector termination. Suitable for product response testing, modal and structural analysis and triaxial vibration testing applications, units measure .30 L x .24 W x .26 in. H and weighs 0.9 g. Having resonant frequency greater than 30... Read More

Sensors Monitors & Transducers

Miniature IEPE Accelerometers suit high-frequency vibration applications.

Dec 04, 2015

With 10,000 Hz upper frequency response and 0.24 in. overall height, 3274A series can mount in typically inaccessible spaces. Models offer sensitivities of 5, 10, and 25 mV/g and feature shear sensing element in teardrop titanium housing. Used to measure shock and vibration of small, lightweight objects such as PCBs and board-mounted components, hermetically sealed series is designed for adhesive... Read More

Sensors Monitors & Transducers

Flight Test Accelerometer uses aircraft on-board voltage.

Dec 04, 2015

Suited for use in flight testing applications, hermetically sealed 3326A Series works with standard aircraft on-board power supplies from +20 to +32 Vdc. Two models are available, with sensitivities of 10 and 100 mV/g, and both feature ceramic sensing elements operating in shear mode and packaged in titanium housing. Low-noise accelerometers feature ¼-28, 4-pin radial connector and miniature... Read More

Sensors Monitors & Transducers

Isolated IEPE Accelerometer has ultra miniature teardrop design.

Dec 04, 2015

At 0.119 in. high and 0.3 g, model 3224M5 is designed to adhesively mount in otherwise inaccessible spaces. Accelerometer operates in temperatures to +300°F and features shear sensing element in lightweight laser welded titanium housing. Available with 10 mV/g sensitivity, product is case isolated to avoid EMI/ground loop interference and has 3 ft integral cable that terminates to 10-32 jack.... Read More

Sensors Monitors & Transducers

Charge Mode Accelerometer operates up to 1,000 deg F.

Dec 02, 2015

With internal electrical isolation design, Model 3316C2 eliminates need for additional isolated mounting block. Single axis unit features horizontal 10-32 coaxial connector and provides acceleration range of 7 g with sensitivity of 1–2 pC/g. Accelerometer is suited for high temperature applications including turbine engine test cells, exhaust manifold testing, nuclear reactor cooling tubes,... Read More

Sensors Monitors & Transducers

Ultra Miniature Accelerometer operates reliably up to +350°F.

Nov 02, 2015

Model 3224C low-profile (0.105 in.) charge mode accelerometer weighs 0.2 g and incorporates ceramic shear sensing element in laser-welded titanium housing. Standard 3 ft integral cable terminates to 10-32 jack and is designed to mate with several Dytran extension cables. With sensitivity of 0.6 pC/g, accelerometer is designed to adhesively mount in tight spaces and suits measurement of shock and... Read More

Sensors Monitors & Transducers

Miniature Triaxial Accelerometers support modal analysis.

Nov 02, 2015

Available in 3 sensitivities of 10, 50, and 100 mV/g, Series 3263A combines ceramic shear sensing elements and low-noise electronics in titanium housing. Units offer broad frequency response with 4-pin radial connector and internal 4-40 thread for stud mounting. Hermetically sealed for high-humidity and dirty environments, IEPE accelerometers are suited for automotive applications, including... Read More

Sensors Monitors & Transducers

Dynamic Pressure Sensors offer 10, 50, or 100 mV/psi sensitivity.

Nov 02, 2015

Comprised of miniature IEPE pressure sensors, 2006V series measures dynamic pressure phenomena, such as pressure perturbations in hydraulic and pneumatic systems, and fast rise time measurements, such as in shock tubes or field blast testing. Construction includes quartz sensing element operating in compression mode, stainless steel housing, 2-pin MIL-C-5015 axial connector, and 1/4-18 NPT pipe... Read More

Sensors Monitors & Transducers

Miniature IEPE Accelerometers suit HALT/HASS testing.

Nov 02, 2015

Offering sensitivity of 10 mV/g and 500 g shock limit, Models 3030B4G and 3030B5G feature frequency response of 2 Hz and 5 Hz, respectively. Units are constructed of stainless steel and are hermetically sealed for reliable operation in high humidity and dirty environments. Both incorporate 10-32 axial connector and adhesive mounting capabilities. Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Portable Vibration Measurement System features 16 g range.

Dec 07, 2012

Suitable for low-to-medium frequency vibration applications, VibraScout™ combines USB triaxial DC response accelerometer, 15 ft 4-pin to USB cable assembly, VibraScout™ Data Acquisition Software, and VibraScout Post Processor software. Variable capacitance accelerometer operates from 3.8–6.0 Vdc with low-end frequency response down to DC (0 Hz) and upper frequency range of 1,100 Hz. With... Read More

Sensors Monitors & Transducers

Miniature Accelerometer survives temperatures to +375°F.

Aug 16, 2012

Designed for use in high-temperature, general-purpose vibration applications, model 3122C miniature charge mode accelerometer has hermetically sealed, all-stainless steel design and sensitivity of 50 pC/g. Sensor operates in compression mode, and standard features include 10-32 radial connector and 10-32 tapped mounting hole. Weight of 25 g and height of 0.50 in. make this product suited for... Read More

Sensors Monitors & Transducers

Low-Powered Accelerometer suits down-hole drilling applications.

Aug 10, 2012

Capable of operating to +347°F, model 3003B triaxial IEPE accelerometer is supplied in miniature titanium housing with vertical height of 0.365 in. and is designed for down-hole drill head vibration monitoring. Unit will operate with +4.0 to +5.5 Vdc compliance voltage and offers sensitivity of 2 mV/g. Along with 500 g range, features include adhesive mounting capabilities, 6 g total weight,... Read More

Sensors Monitors & Transducers

Miniature Accelerometer operates in temperatures to +900°F.

May 23, 2012

At 5 g and 0.39 in. high, model 3316M1 utilizes planar shear technology and features charge mode element mounted in hermetically sealed, miniature Inconel® housing. Silver window on top cover of housing provides oxygen access to crystal at high temperatures while maintaining hermetic seal. Along with sensitivity from 1-2 pC/g, unit offers 10,000 Hz upper frequency response and has 10-32 tapped... Read More

Sensors Monitors & Transducers

Miniature Accelerometer has height of 0.23 in.

Apr 23, 2012

Designed to adhesively mount in confined spaces, Model 3225M39 teardrop IEPE accelerometer offers sensitivity of 10 mV/g, has overall height of 0.23 in., and weighs 0.95 grams. It features quartz shear sensing element in lightweight titanium housing and utilizes an integral three-foot coaxial cable assembly terminating to 10-32 jack. Device offers a broad frequency response range of 1.2-10,000... Read More

Sensors Monitors & Transducers

IEPE Accelerometer provides permanent vibration monitoring.

Apr 03, 2012

Used for vibration monitoring of rotating machinery and other equipment, low-profile model 3059A has thru hole 1/4-28 mount and radial 2-pin MIL-C-5015 connector. Design incorporates ceramic shear sensing element in stainless steel housing, and sensor can be turned 360° prior to being secured to aid installation. Available with sensitivity of 100 mV/g, hermetically sealed unit has low-end... Read More

Electronic Components & Devices

In-Line Charge Amplifier suits high-temperature applications.

Apr 02, 2012

Designed for use with high-temperature charge mode accelerometers, Model 4753B is powered using constant current sources and is compatible with IEPE designated instrumentation. Miniature device can accept sensors with insulation resistance as low as 100 kW without deterioration in performance. Offered with 10-32 jack input connector and BNC jack output connector, Model... Read More

Sensors Monitors & Transducers

IEPE Accelerometer suits environmental stress screening.

Mar 19, 2012

With overall height of 0.33 in., Model 3334A1 is suited for vibration testing where vertical space is limited. Miniature unit is available with sensitivity of 10 mV/g and features titanium housing, 5-40 mounting stud, and 5-44 radial connector. Hermetically sealed for operation in high humidity and dirty environments, accelerometer supports product response testing applications in addition to... Read More

Electronic Components & Devices, Test & Measuring Instruments

Signal Conditioner works with charge mode and IEPE sensors.

Feb 13, 2012

Microprocessor-controlled model 4020 incorporates charge amplifier when used with charge mode sensors or 4 or 10 mA, user-selectable current source with 20 Vdc compliance voltage when used with IEPE sensors. For each of its 3 channels, unit uses 12-bit DACs to set amplifier gains from 0.00-999.9 with 0.5% precision. UI facilitates programming of I/O sensitivities, which enables instrument to... Read More

Sensors Monitors & Transducers

Miniature Piezoelectric Accelerometer operates up to +900°F.

Dec 12, 2011

Offered with sensitivity between 1 and 2 pC/g, model 3316C features charge mode element mounted in hermetically sealed, miniature Inconel® housing with 0.36 in. profile. Silver window on top cover of housing provides oxygen access to crystal at high temperatures while maintaining unit's hermetic sealing. Utilizing planar shear technology, product weighs 5 g and has 10,000 Hz upper frequency... Read More

Electronic Components & Devices, Test & Measuring Instruments

DC Signal Conditioner Amplifier is controlled via MPU.

Dec 09, 2011

Three-channel model 4010 is designed for use with bridge type or differential output accelerometers and pressure transducers. In addition to variable gain adjustment, shunt calibration capability, and multiple excitation level settings, amplifier offers MPU sleep mode that eliminates high-frequency clock noise and associated harmonics. Product also includes dual 12-bit DACs for each channel to... Read More

Other Company News from
Dytran Instruments, Inc.