Company News

Dytran Instruments, Inc.

21592 Marilla St., Chatsworth, CA, 91311, USA

  • 818-700-7818

Latest New Product News from
Dytran Instruments, Inc.

Computer Hardware & Peripherals, Electronic Components & Devices, Test & Measuring Instruments

IEPE Signal Conditioning Board features 4 channels.

July 7, 2008

Intended for OEM applications, Model 4007 4-channel IEPE signal conditioning board features 2 outputs labeled AC and DC for each channel. Each channel is equipped with variable low pass filter of 3 and 10 kHz, and channel 1 features logical output for fault detection. Requiring 20-36 Vdc, unit needs only one constant voltage supply for all 4 channels. With PCB-based physical configuration, it... Read More

Sensors Monitors & Transducers

Piezoelectric Accelerometer has stable MOSFET electronics.

July 1, 2008

Suited for general purpose measurement of acceleration, Model 3215M1 rugged IEPE accelerometer features quartz shear design element and thru-hole design for 360° connector orientation. It features case isolation technique utilizing anodized washers to assure off-ground operation and elimination of potential ground loops. Hermetically sealed sensor is designed for operation where flat frequency... Read More

Sensors Monitors & Transducers

IEPE Accelerometer is for modal analysis applications.

June 17, 2008

Model 3097A Integrated Electronics Piezo Electric (IEPE) accelerometer is 0.4 inch cube with 100 mV/g sensitivity. Laser welded titanium design includes ceramic shear sensing element coupled to ultra low noise JFET electronics package. Unit also features adhesive mount and industry standard 10-32 connector. Read More

Sensors Monitors & Transducers

Piezoelectric Accelerometers have miniature tear drop design.

March 28, 2008

Designed for adhesive mount, Models 3225M23 and 3225M24 low profile, voltage mode (IEPE) accelerometers can be mounted in spaces slightly greater than .25 in. wide. Featuring titanium housing and weighing 1 g, units are suited for measurement of shock and vibration of small, lightweight specimens such as PCBs and board-mounted components. They have .215 in. height and include 3-56 coaxial... Read More

Sensors Monitors & Transducers

Single Axis Cubic IEPE Accelerometers are ground isolated.

March 20, 2008

Including 3 models, Series 3234A accelerometer has cubic design that allows for adhesive mounting on multiple mounting faces, low noise electronics, wide bandwidth, all titanium construction, and 10-32 mounting hole. Self generating seismic element converts acceleration to analogous electrostatic charge mode signal. Suited for modal analysis, NVH, Squeak & Rattle, and general purpose vibration... Read More

Sensors Monitors & Transducers

Triaxial Accelerometer features single, 5-pin connector.

March 10, 2008

Measuring 0.28 in. vertically and weighing 2.4 g, Model 3023M20 mounts with adhesive into small spaces. Instrument contains 3 miniature quartz laminar shear mode accelerometer elements mounted to single support and welded into titanium housing. Elements are mounted orthogonally to each other to allow measurment of complete motion of a point. IEPE design incorporates 3 IC amplifiers built into... Read More

Sensors Monitors & Transducers

Piezoelectric Sensor measures fast pressure transients.

March 3, 2008

Model Series 2301B high frequency IEPE probe type pressure sensors feature 1 µsec rise time and acceleration compensation along with high natural frequency to minimize ringing induced by fast rise time inputs. Hermetically sealed series consists of 6 full scale range models, from 250-15,000 psi, in slender probe configuration with external clamp nut that has 5/16-24 mounting threads.... Read More

Sensors Monitors & Transducers

Miniature Accelerometer features 100 kHz natural frequency.

February 27, 2008

Suitable for high shock measurements, 3086A Series is designed for drop/shock testing and far field blast testing. Piezoelectric accelerometer weighs only 3.5 g, and features top mounted solder pins/terminals which eliminate discontinuities during high gravity events and also help reduce stresses on connector. Offered in 6 ranges from 2,500-70,000 G, electrically isolated and hermetically sealed... Read More

Sensors Monitors & Transducers

Miniature Accelerometer minimizes mass loading effects.

January 28, 2008

Weighing 0.2 g, Model 3224A2 is laser welded in titanium housing with teardrop design, suited for vibration measurements in small locations. Piezoelectric accelerometer features sensitivity of 2 mV/g and can operate at temperatures up to 300°F. It includes integrated electronics, adhesive mount, and planar shear quartz design, which minimizes base strain sensitivity, thermal transient... Read More

Sensors Monitors & Transducers

Force Sensors feature 10-32 tapped hole on top and bottom.

January 28, 2008

Offered in 6 ranges from 10-5,000 lbf, 1053V series of dynamic force sensors also includes radial 10-32 coaxial connector. Sensors have 75 kHz resonant frequencies suited for rapid force impacts and are used in industries such as press applications and automated machinery. Read More

Sensors Monitors & Transducers

Accelerometer has low-profile, through-hole design.

January 18, 2008

Designed for use where vertical clearance is limited and 360° orientation is important, 3211A IEPE accelerometer weighs 9.6 g and offers 360° connector orientation. Screw- or adhesive-mounted unit features side exit 10-32 connector and 10-32 mounting screw, all-titanium construction, hermetic seal, and ring style configuration. Available in 10 and 100 mV/g sensitivities, accelerometer also... Read More

Sensors Monitors & Transducers

Accelerometer withstands cryogenic conditions.

December 28, 2007

Electrically isolated and hermetically sealed, model 3045A is miniature triaxial IEPE accelerometer designed specifically for vibration testing under cryogenic conditions. It is capable of continuous operation from +300°F down to -420°F and offers stable signal output. Two poles of low pass filtering help remove spurious high frequency data, and sensitivity is rated at ±5%. Full Scale... Read More

Sensors Monitors & Transducers

Triaxial Accelerometer features high-temperature design.

December 17, 2007

Capable of operating at temperature up to 320°F, miniature Model 3023M23 features ±500 g full scale range on each axis and sensitivity of 10 mV/g. Labels of X, Y, and Z axes are laser-marked in large font size on 3 orthogonal faces, helping user to orient sensor. Read More

Sensors Monitors & Transducers

Accelerometer provides underwater vibration measurements.

December 12, 2007

Featuring center bolt mount with 360° cable orientation, Model 3211M1 can be used down to depths where water pressure reaches 175 psi. Unit features nominal sensitivity of 10 mV/g and includes integral 10 ft cable terminating to BNC plug. Housed in titanium, sensor mounts with No. 8 or M4 screw. Read More

Sensors Monitors & Transducers

Differential Accelerometer suits high-temperature jobs.

October 31, 2007

Able to operate at temperatures up to +600°F, 3085C charge mode accelerometer is built with hermetic seal and housing made of Inconel 600 in order to survive harsh environments. Unit has sensitivity rated at 10 pC/g and 500 g FS range, 3-bolt pattern mounting flange, and 2-pin electrical connector. It is suited for turbine engine vibration measurements as well as other high-temperature... Read More

Sensors Monitors & Transducers

ESS Accelerometer suits small size/low mass applications.

October 1, 2007

Model 3089A subminiature, adhesive mount accelerometer features 10 mV/g sensitivity. Weighing 0.6 g, it includes integral lead wires and can be used for Environmental Stress Screening (ESS), printed circuit board testing, and OEM/embedded applications. Read More

Sensors Monitors & Transducers

Charge Mode Accelerometer operates in temperatures to 600° F.

September 7, 2007

Model 3088C high temperature, charge mode accelerometer has nominal sensitivity of 10 pC/g and upper frequency range of 5,000 Hz. Hermetically sealed unit features 10-32 side connector, 10-32 tapped hole, and all stainless steel construction. Device has hex x height of .625 x 1.07 in. and weighs 42 g. Read More

Sensors Monitors & Transducers

Accelerometer features sensitivity of up to 500 mV/g.

September 4, 2007

Suited for modal analysis, NVH, Squeak & Rattle, and general purpose vibration applications, 3214A Series Single Axis Cubic Accelerometer features ultra low noise electronics and all titanium construction. Cubic design allows for adhesive mounting on multiple mounting faces and unit includes 10-32 mounting hole. It is available in sensitivities of 10, 100, and 500 mV/g. Read More

Sensors Monitors & Transducers

Triaxial Accelerometer operates in high temperatures.

March 15, 2007

Featuring .36 x .36 in. footprint, miniature Model 3023AH features integral electronics (IEPE) and has 2-10,000 Hz frequency range. Unit is engineered to perform over -60 to +325°F range, making it suited for automotive NVH applications on engines and HASS/HAST chambers or critical flight test applications. Fully welded and hermetically sealed, accelerometer weighs 3 g, has sensitivity of 10... Read More

Sensors Monitors & Transducers

Accelerometer suits zero to medium frequency applications.

January 18, 2007

Intended for commercial and industrial uses, variable capacitance Model 7500A features micromachined capacitive sensing element housed in hermetically sealed titanium case. DC-coupled unit also includes custom integrated circuit amp, differential output stages, and onboard voltage regulator. Insensitive to temperature changes and thermal gradients, device comes with integral ¼-28 4-pin... Read More