TMP, a division of French
Piqua, OH 45356
Share:
Vertical Injection Press meets rubber molding requirements.
MAXI-JET(TM) hydraulic press, engineered for rubber and silicone molding, is offered in standard models from 50-400 tons with shot sizes up to 6,000 cc. Custom designs are also available. Featuring mold shuttle and mold-plate separators, 300-ton MAXI-JET offers shot size of 3,000 cc and platen size of 23 x 23 in.
Read More »
Rubber Presses are offered in various types.
Maxi-Jet(TM) Rubber Injection Systems and Maxim(TM) Hydraulic Compression and Vacuum Presses are suited for molding rubber, silicone, and composites. Maxi-Jet(TM) injection presses are available in sizes up to 10,000 cc, while Maxim(TM) presses are available with clamping forces up to 1,000 ton and platens up to 42 in. Custom designs are also available.
Read More »
Vacuum Rubber Injection Machine eliminates trapped air/gas.
Using proprietary vacuum molding system, Vacu-Jet(TM) eliminates/minimizes entrapped air and gas that cause defects in molded products. Press utilizes FIFO system that ensures proper residence time for material and shot consistency. Available with injection capacities of 500-10,000 cc and clamping forces from 100-1,500 tons, machine features IPS Control System for process control and monitoring....
Read More »
Rubber Molding System provides automated mold handling.
Hydraulic rubber molding presses, available in models from 600-2,000 tons, employ automatic mold handling system that opens and closes molds as well as self-adjusting elevator system for precise mold alignment. PLC control system eliminates manual set-ups and provides for proportional motion control. With eight 10 in. mold openings, 600 ton model utilizes 74 x 54 in. platens and features 30 in....
Read More »
Plastic Compounding Mixer removes moisture while mixing.
Model VMX removes moisture, entrapped air, and volatiles present in compounds. Combining heat and vacuum system, unit is suitable for use with hygroscopic and non-hygroscopic resins. It features hardened mixing rotors and abrasion hardened stainless steel mixing chamber with leak-proof construction. Mixing chamber tilts for quick discharge and cleanout. VMX Mixer comes in 5 L lab models, and in...
Read More »
Rubber Transfer Molding System is fully automatic.
Model T770 770-ton press features 32 x 32 in. platens and produces rapid shot size of 20 lb or higher. Servo hydraulics control size and velocity of shot. Platens are equipped with 3 zones of electric temperature control, while other sections of system employ liquid temperature control. Controls also notify machine tender when recharging of material is required. Molded parts are ejected into tote...
Read More »
Card Press suits print shops and short run applications.
Model 1826-3 plastic laminating press utilizes 18 x 26 in. aluminum platens, and produces up to 2640 plastic cards/hr. Self-contained package includes laminator, closed-loop cooling system, trays, polished lamination plates, and pads. Advanced Control Package provides storage of 5 recipes, temperature and pressure ramping, actual vs setpoint data display, and visual and audible alarms, including...
Read More »
Vacuum Press suits polytetrafluorethylene laminating.
Vacuum compression press laminates fluoropolymers at temperatures up to 735Ã-
Read More »
Multiple Presses come with single control.
TMP modular presses combine multiple press units with unified controls and hydraulics. Systems are built on 1-piece bases and can be produced in multiples of 2 or 4 presses. Control system permits independent operation of each press and provides control of cycle time, temperature, and pressure. Press systems are available in 30, 50 or 100 tons with platen sizes of 12 x 12, 15 x 15, or 20 x 20 in....
Read More »Laminators offer twin press arrangement.
Low profile laminators are installed at floor level, with no pit required. Lowest opening is 18 in. above ground level. Hydraulic components and rams, located outside of work envelope, reduce seal replacement frequency. Industrially hard process controllers provide programmable control of pressure, temperature, and material handling. Sizes are available up to 1000 tons with up to 24 openings....
Read More »TMP Steps Up Compression & Injection Press Rebuilding
Cleveland, OH: Technical Machine Products (TMP), a global supplier of new and rebuilt presses and mixers for the rubber, composite and laminations markets, is expanding its Rebuilding Services capabilities. TMP can provide rebuilding and upgrading of most OEM brands of injection and compression presses at an extremely competitive price. According to Ted Soberay, TMP President, Our company has...
Read More »
Vertical Injection Press meets rubber molding requirements.
MAXI-JET(TM) hydraulic press, engineered for rubber and silicone molding, is offered in standard models from 50-400 tons with shot sizes up to 6,000 cc. Custom designs are also available. Featuring mold shuttle and mold-plate separators, 300-ton MAXI-JET offers shot size of 3,000 cc and platen size of 23 x 23 in.
Read More »
Rubber Presses are offered in various types.
Maxi-Jet(TM) Rubber Injection Systems and Maxim(TM) Hydraulic Compression and Vacuum Presses are suited for molding rubber, silicone, and composites. Maxi-Jet(TM) injection presses are available in sizes up to 10,000 cc, while Maxim(TM) presses are available with clamping forces up to 1,000 ton and platens up to 42 in. Custom designs are also available.
Read More »
Vacuum Rubber Injection Machine eliminates trapped air/gas.
Using proprietary vacuum molding system, Vacu-Jet(TM) eliminates/minimizes entrapped air and gas that cause defects in molded products. Press utilizes FIFO system that ensures proper residence time for material and shot consistency. Available with injection capacities of 500-10,000 cc and clamping forces from 100-1,500 tons, machine features IPS Control System for process control and monitoring....
Read More »
Rubber Molding System provides automated mold handling.
Hydraulic rubber molding presses, available in models from 600-2,000 tons, employ automatic mold handling system that opens and closes molds as well as self-adjusting elevator system for precise mold alignment. PLC control system eliminates manual set-ups and provides for proportional motion control. With eight 10 in. mold openings, 600 ton model utilizes 74 x 54 in. platens and features 30 in....
Read More »
Plastic Compounding Mixer removes moisture while mixing.
Model VMX removes moisture, entrapped air, and volatiles present in compounds. Combining heat and vacuum system, unit is suitable for use with hygroscopic and non-hygroscopic resins. It features hardened mixing rotors and abrasion hardened stainless steel mixing chamber with leak-proof construction. Mixing chamber tilts for quick discharge and cleanout. VMX Mixer comes in 5 L lab models, and in...
Read More »
Rubber Transfer Molding System is fully automatic.
Model T770 770-ton press features 32 x 32 in. platens and produces rapid shot size of 20 lb or higher. Servo hydraulics control size and velocity of shot. Platens are equipped with 3 zones of electric temperature control, while other sections of system employ liquid temperature control. Controls also notify machine tender when recharging of material is required. Molded parts are ejected into tote...
Read More »
Card Press suits print shops and short run applications.
Model 1826-3 plastic laminating press utilizes 18 x 26 in. aluminum platens, and produces up to 2640 plastic cards/hr. Self-contained package includes laminator, closed-loop cooling system, trays, polished lamination plates, and pads. Advanced Control Package provides storage of 5 recipes, temperature and pressure ramping, actual vs setpoint data display, and visual and audible alarms, including...
Read More »
Vacuum Press suits polytetrafluorethylene laminating.
Vacuum compression press laminates fluoropolymers at temperatures up to 735Ã-
Read More »
Multiple Presses come with single control.
TMP modular presses combine multiple press units with unified controls and hydraulics. Systems are built on 1-piece bases and can be produced in multiples of 2 or 4 presses. Control system permits independent operation of each press and provides control of cycle time, temperature, and pressure. Press systems are available in 30, 50 or 100 tons with platen sizes of 12 x 12, 15 x 15, or 20 x 20 in....
Read More »