GAO Embedded Inc.
Toronto 12345 CAN
Share:
Compact Universal Programmer tests variety of memory devices.
Model VP990 tests EPROMs, TTL/CMOS logic IC devices, dynamic or static memory devices, PROM, PLDs, Flash MCUs, and serial or parallel memory. When in auto-run mode, unit programs automatically upon detection of chip insertion and identifies manufacturer and type of device. It connects to computer via USB port, and it conducts poor pin contact check upon device insertion. Compatible with most...
Read More »Emulator Pod is designed for debugging hardware/software.
Powered by either target board or supplied adapter, XDS510PP JTAG Scan Path TI DSP Emulator Pod is suited for flash programming. It operates through parallel port on PC or laptop and supports bi-directional EPC and EPP transfer. Device is compatible with TI's XDS510, +3.3 or +5 V processors, SPI110 Opto Pod, and 4 channel JTAG expanders.
Read More »IPTV Tester incorporates xDSL test functions.
Aiding in maintenance of IPTV services, GAO360 includes xDSL functions and can also test video frequency quality, code stream quality, and net configuration. It provides various types of test patterns, such as simulation, interception, series connection, and straight connection. True color, 3.5 in. TFT LCD with touchscreen functionality facilitates operation as well as direct display of test...
Read More »Visual Fault Locator finds defects in optical fiber.
Featuring universal connector, ruggeddly designed GAO08211 is intended for examining patch cords, ribbon, or bunched pigtails and for installing and maintaining fiber optic networks. Device supports end-to-end fiber identification and mechanical fusion splice optimization. Compact locator provides measurement ranges of up to 5 km and detects breaks and micro-bends even through jacketed fibers.
Read More »DSP Emulator is based on XDS510 technology.
Designed to be used with DSPs operating between 1.0-5.0 V, TDS510 PCMCIA TI DSP Emulator supports TI DSP with JTAG interfaces, such as C240X, F28X, VC33, C5000, C6000, TMS470 (ARM), and OMAP platforms. Bus-powered PCMCIA device is compatible with Type II PCMCIA interfaces, is plug and play compatible, and draws its power from host PCMCIA connection. It is compliant with Code Composer Studio IDE...
Read More »Compact Universal Programmer tests variety of memory devices.
Model VP990 tests EPROMs, TTL/CMOS logic IC devices, dynamic or static memory devices, PROM, PLDs, Flash MCUs, and serial or parallel memory. When in auto-run mode, unit programs automatically upon detection of chip insertion and identifies manufacturer and type of device. It connects to computer via USB port, and it conducts poor pin contact check upon device insertion. Compatible with most...
Read More »Emulator Pod is designed for debugging hardware/software.
Powered by either target board or supplied adapter, XDS510PP JTAG Scan Path TI DSP Emulator Pod is suited for flash programming. It operates through parallel port on PC or laptop and supports bi-directional EPC and EPP transfer. Device is compatible with TI's XDS510, +3.3 or +5 V processors, SPI110 Opto Pod, and 4 channel JTAG expanders.
Read More »IPTV Tester incorporates xDSL test functions.
Aiding in maintenance of IPTV services, GAO360 includes xDSL functions and can also test video frequency quality, code stream quality, and net configuration. It provides various types of test patterns, such as simulation, interception, series connection, and straight connection. True color, 3.5 in. TFT LCD with touchscreen functionality facilitates operation as well as direct display of test...
Read More »Visual Fault Locator finds defects in optical fiber.
Featuring universal connector, ruggeddly designed GAO08211 is intended for examining patch cords, ribbon, or bunched pigtails and for installing and maintaining fiber optic networks. Device supports end-to-end fiber identification and mechanical fusion splice optimization. Compact locator provides measurement ranges of up to 5 km and detects breaks and micro-bends even through jacketed fibers.
Read More »DSP Emulator is based on XDS510 technology.
Designed to be used with DSPs operating between 1.0-5.0 V, TDS510 PCMCIA TI DSP Emulator supports TI DSP with JTAG interfaces, such as C240X, F28X, VC33, C5000, C6000, TMS470 (ARM), and OMAP platforms. Bus-powered PCMCIA device is compatible with Type II PCMCIA interfaces, is plug and play compatible, and draws its power from host PCMCIA connection. It is compliant with Code Composer Studio IDE...
Read More »