Company News

Henkel Corporation

One Henkel Way, Rocky Hill, CT, 06067, US

  • 860-571-5100
  • 800-562-8483

Public Relations:
Paula Zakrzewski Shepard
Image Ink Public Relations
USA
Phone: 860-228-8056
E-mail this person

Share Like Tweet Add Email

Latest New Product News from
Henkel Corporation

Materials & Material Processing

Solder Paste is temperature stable at 26.5°C for 1 year.

March 4, 2015

Halogen-free and lead-free, LOCTITE GC 10 enables abandon times of up to 24 hours and has startup time of 0. Product offers stabilized and consistent print transfer efficiency, expanded reflow window, and increased activity for optimum results with soak temperature from 150–200°C. Temperature stable up to 40°C for one month, paste eliminates requirement for cold packing, overnight shipping, and refrigerated storage. Read More

Material Handling & Storage, Packaging Equipment

Bath/Shower Amenity Dispenser helps hospitality reduce waste.

November 6, 2014

Used for away-from-home hair and body care, Dial® Eco-Smart® Amenity Dispenser helps hotels, cruise lines, and healthcare facilities reduce plastic waste. Wall-mounted dispenser is constructed from ABS plastic, and 100% recyclable refill bottles, which hold 15 oz of product, eliminate use of small bottles. Reservoir tank in dispenser allows consumers to use entire contents of refill without any waste, and locking mechanism with non-corrosive key helps prevent tampering and vandalism. Read More

Materials & Material Processing

Printable PTC Inks target heating applications.

October 27, 2014

Replacing traditional copper wire and printed carbon, LOCTITE ECI 8000 Series enables design of products that require adaptable heating functionality. Positive Temperature Coefficient materials are self-regulating so that temperature does not rise above set point, and non-linear relationship between voltage and temperature eliminates need for fuse. With rapid and uniform heating, inks are suited for automotive mirrors and windshields, seat heaters, and condensation control in consumer goods. Read More

Adhesives & Sealants, Fluid & Gas Flow Equipment

Professional Sealant suits window, door, and siding applications.

August 1, 2014

Formulated to meet contractor requirements regarding flexibility, strength, and durability, QUAD® MAX window, door, and siding sealant withstands effects of such harsh weather conditions as freezing temperatures, intense heat, winds, rain, sleet, snow, and dirt. UV-resistant product, which cures in 24 hr and can be painted within 1 hr, develops strong bond in wet and dry conditions; offers 5X stretch and 50% joint movement; and adheres to diverse building materials (without primer).
Read More

Materials & Material Processing, Services

Foaming Polyurethane protects hydraulic roof supports from debris.

June 26, 2014

Pour-in-place Loctite® MR5898™ bonds to pockets and hydraulic cylinders. By foaming up to fill entire cavities and adhering to edges, foam blocks out debris, particulate, teeth, or tools that might damage equipment while remaining flexible enough to allow free movement of hydraulic leg. This self-extinguishing, low-odor foam, intended for use underground and in confined spaces, has 2-part formula that begins to foam minutes after mixing, and becomes tack-free within minutes of pouring. Read More

Adhesives & Sealants

Flexible Adhesives fixture to handling strength in 5 sec or less.

April 7, 2014

Cyanoacrylate adhesives Loctite® 4902™ and 4903™ bond reliably to plastics, rubbers, metals, and other substrates. Affording optimal flexibility, Loctite® 4902™ offers elongation of 155% and modulus of 57,900 psi. Loctite® 4903™ offers 85% elongation and modulus of 78,100 psi. Designed for use on close-fitting, flexible parts, these one-part instant adhesives can bond dissimilar substrates and offer ISO 10993 biocompatibility for use on disposable medical devices. Read More

Paints & Coatings, Chemical Processing & Waste Management

Autodeposition Coating suits iron castings and ferrous metals.

February 18, 2014

Formulated to deliver uniform, defect-free surface coating on both inside and outside of complex components, Bonderite® M-PP 930C™ provides corrosion and abrasion resistance, thermal stability, and edge protection. Water-based, epoxy-acrylic urethane coating will coat any surface it wets during immersion of parts with no limitation as to part size, shape, or density. Non-flammable, non-explosive, and RoHS-compliant, coating contains no toxic heavy metals, very low VOCs, and no APEs or HAPs. Read More

Adhesives & Sealants

Silane-Modified Polymer Adhesives seal seams and joints.

December 27, 2013

Designed for elastic bonding, coating, and sealing of seams and joints on most metal, plastic, and composite substrates, Teroson® MS 930™ and Teroson® MS 939™ require no primers and offer both UV and weather resistance. Solvent- and isocyanate-free, one-part adhesives cure rapidly with exposure to ambient moisture. Supplied in sausage packs, products experience limited shrinkage on cure and are paintable, making them suitable for applications where aesthetics are important. Read More

Adhesives & Sealants

Oil-Tolerant Anaerobic Adhesives can cure through contaminants.

December 18, 2013

Formulated as wax-like, semi-solid adhesives packaged in self-feeding stick applicator, Loctite® 248™ Medium Strength Blue and Loctite® 268™ High Strength Red Threadlocker Sticks securely lock and seal threaded assemblies, fill gaps between threads, and prevent corrosion. These anaerobic threadlocker sticks can be used on oil-contaminated surfaces without requiring primers or accelerators and will not leak or drip when carried in pocket, stored in toolbox, or used in overhead applications. Read More

Materials & Material Processing

Transparent Conductive Inks target industrial touchscreens.

October 31, 2013

Printed using standard printing processes, Loctite ECI 5000 Series allows for precise control of material deposition pattern and thickness. Inks can be printed down to sheet resistance of 30 Ω/square versus single-layer ITO, which averages 60 Ω/square. Used in concert with ECI 5000 Series, Loctite NCI 9001 top coat optimizes environmental protection, handling, and UV stability. Applications include industrial touchscreens, EL lighting, solar cell manufacturing, and micro-scale LED lighting. Read More

Adhesives & Sealants, Materials & Material Processing

Anaerobic Retaining Compounds cure through contaminants.

October 17, 2013

Allowing primerless performance on oily or contaminated surfaces, Loctite® 638™/648™/680™ make joints stronger, distribute stress evenly, and prevent corrosion/fretting. General-purpose Loctite 638 resists temperatures to 175°C and can be used in applications with gaps to 0.25 mm. Used in temperatures to 180°C, general-purpose Loctite 648 fixtures in 5 min with full cure in 24 hr and fills gaps to 0.15 mm. High-strength, low-viscosity Loctite 680 supports use on parts with gaps to 0.38 mm. Read More

Materials & Material Processing

Halogen-Free Solder Paste offers consistent print performance.

September 13, 2013

Optimized for use on components with pitches of 0.3 mm and greater, Loctite Multicore HF 212 contains zero deliberately added halogen and is under limit of detection for chlorine and bromine. Lead-free material exhibits extremely low voiding in CSP via-in-pad joints, good coalescence, and optimal solderability over wide range of surface finishes including Ni/Au, Immersion Sn, CuNiZn, Immersion Ag, and OSP copper. In addition, paste has very low residues and minimal hot slump. Read More

Adhesives & Sealants, Chemical Processing & Waste Management

Silicone Adhesives suit direct bonding applications.

June 28, 2013

Designed to fixture in less than 2 seconds, Loctite® Liquid Optically Clear Adhesives are compatible with 365 nm or 405 nm LED light sources and are intended for direct bonding cover lenses or touch panel sensors to LCDs. UV-curable Loctite® 5191™ and UV/moisture-cure 5193™ and matching dam, Loctite® 5191DM™, feature patented chemical formula that accelerates cure speed. Suited for high-volume display applications, UV curable Loctite® 5192™ cures with moisture in shadowed areas. Read More

Adhesives & Sealants

Primer Cures Shadowed LOCA in less than 90 min.

May 30, 2013

Formulated for direct bonding, Loctite® 7389™ Primer and Loctite® 3196PR™ Liquid Optically Clear Adhesive (LOCA) cures fully in <90 min in shadowed areas where light cannot penetrate during UV cure processes for 4–15 in. displays of devices ranging from cell phones to monitors. Non-invasive application of primer takes place off-line and does not require any laminating process modification/adjustment. Soft acrylic adhesive reduces potential for MURA while filling gaps from 200–300 microns. Read More

Adhesives & Sealants, Materials & Material Processing

Silicone Potting Compound features UL 94 VO rating.

May 15, 2013

Designed to ensure integrity of electrical components by sealing against corrosion and outdoor contaminants, Loctite® SI 5640T offers strong adhesion to plastics and resists 85°C/85% RH aging conditions. Two-part, self-leveling compound is flame retardant when applied in thicknesses as low as 6 mm. Gelling in 5 minutes, product offers 30 Shore A hardness and elongation greater than 100%. Applications include electrical meters, signage/displays, HVAC components, solar panels, and LED lighting. Read More

Adhesives & Sealants

Flexible Structural Adhesive bonds dissimilar substrates.

December 5, 2012

Suited for structural assembly of truck/trailer bodies, specialty vehicles, and wind turbine components, general-purpose Loctite® UK 1366 B10™ withstands expansion/contraction caused by temperature fluctuations. Impact strength and flexibility result in bond lines that withstand stress, vibration, and movement without failure. Resistant to moisture/humidity, nonflammable, 2-part polyurethane adhesive works on aluminum, PVC, polycarbonate, stainless steel, ABS, and galvanized steel. Read More

Adhesives & Sealants

Instant Adhesives withstand humidity, temperatures to 200°F.

November 30, 2012

Comprised of low-odor, low-bloom adhesives, Loctite® 403™/408™/455™/460™ minimize frosting near bond line and provide bond strengths of 2,600 psi on dry or acidic surfaces. Loctite 403 medium-viscosity cyanoacrylate adhesive fills gaps to 0.008 in.; water-thin, wicking grade Loctite 408 fill gaps as small as 0.002 in.; low-viscosity Loctite 460 works on close-fitting parts with gaps up to 0.004 in.; and Loctite 455 non-drip gel, intended for porous surfaces, fills gaps to 0.010 in. Read More

Adhesives & Sealants, Labels, Tags, Signage & Equipment

Casein-Based Labeling Adhesives are zinc- and borax-free.

November 26, 2012

Eticol labeling adhesives are based on natural polymers obtained from casein, minimizing wastewater produced by bottlers and maximizing shelf life and quality of products. Flexible, water-based bottle labels maintain bond on moist and cold surfaces and also in presence of condensation on glass. They are available in variants with high wet tack and ice-water resistance, and can be used with high-speed labeling machines. Read More

Adhesives & Sealants, Materials & Material Processing

Mold Release Agents and Sealers help produce polyurethane foams.

November 26, 2012

Loctite® Frekote® PU7000™ is designed for open cell or gloss surface foams, while PU7001™ release agent and PU7200™ mold sealer are suited for flexible polyurethane or semi-rigid polyurethane foams. Spray applied at temperatures from 95-149°F are thermally stable to 450°F and dry in 30 sec when exposed to ambient moisture at 110°F. Solvent-based polymers offer low mold buildup and minimal transfer during production of polyurethane foams and thermoplastic resins, coatings, and films. Read More

Adhesives & Sealants

High-Temperature Adhesives fixture in 15 seconds or less.

September 28, 2012

Intended for high-speed assembly processes, Loctite® Instant Adhesives cure rapidly on dry or acidic surfaces and maintain bond strength in operating temperatures up to 250°F. Products include medium-viscosity Loctite 401™, water-thin Loctite 406™, low-viscosity Loctite 495™, and Loctite 454™ non-drip gel. Cyanoacrylates bond to variety of substrates including steel, aluminum, ABS, PVC, polycarbonate, nitrile rubber, chromate-plated parts, paper, balsa wood, and more. Read More

Other Company News from
Henkel Corporation