Enviroline Monitoring Systems LLC
Pompano Beach, FL 33069
Share:
Epoxy Primer meets VOC requirements.
Enviroline 58HS enables users to hold surface preparation for up to 90 days while still meeting VOC requirements. Suited for application on interior or exterior steel, concrete, and masonry surfaces, high-solids product has less than 250 g/l VOCs. Applications include large tanks requiring surface preparation and situations where humid environments exist.
Read More »Epoxy Coating is applied in one coat.
Enviroline 380 ultra-high solids, thick-film epoxy coating exhibits chemical- and solvent-resistance in addition to abrasion- and impact-resistance. It does not require preheating prior to application and is suited for tank and pipe owners as well as contractors.
Read More »Coatings are offered in low-temperature cure versions.
Usable at temperatures down to 32Ã-ºF, Enviroline 375LT high-solids epoxy will cure in 5 days. Enviroline 376F-30LT and Enviroline 376F-60LT are 100% solid epoxy coatings that cure in 7 days at 20Ã-ºF or one day at 45Ã-ºF. Each epoxy is suited for use as lining for storage tanks, process tanks, pipelines, and concrete containment areas in petroleum, chemical processing, and wastewater...
Read More »Heat Resistant Coating resists thermal gradients.
EnvirolineÃ-® 405HT withstands high temperature water, oil, and gas in addition to produced water or seawater. It resists combination of water with high-temperature oil or gas. It features high-solids, single-coat, fast cure technology. Applied at 30-35 mil DFT and exposed to internal temperature of 194Ã-
Read More »Coating provides choice of application speed and cure.
EnvirolineÃ-® 124 is 100% solids epoxy girth weld coating for buried steel pipe, and patch kit for tanks and pipes. It offers owners and applicators choice of application speed and curing results without affecting quality of chemically resistant barrier. Pipe may be backfilled as early as 5 to 7 minutes (tack free). Envirolone 124 is applied by putty knife or trowel.
Read More »Reformulated Primers have lower VOCs.
Improvements to Enviroline(R) 58 and Enviroline(R) 59 include easier mixing, lower VOCs, no need for special thinners, and color changes. Enviroline 58 is now available in tan for greater contrast from IECC topcoats, and Enviroline 59 is lighter color to increase hiding ability of Envirothane(TM) 535 Urethane topcoat. Enviroline 58 is epoxy polyamide rust inhibitive primer; Enviroline 59 is for...
Read More »Enviroline Hires Sales & Technical Manager
FT. LAUDERDALE, FLORIDA, September 10, 2008 - Enviroline Group is pleased to announce the recent return of Jim Crumby as Sales & Technical Manager. Though Jim never left the Enviroline Team completely - he recommended, estimated and applied Enviroline coatings and linings as a contractor for the last several years - Jim has returned to Enviroline sales to end the physical demands of his...
Read More »Enviroline Promotes Territory Manager
FT. LAUDERDALE, FLORIDA, June 25, 2008 Enviroline Group is pleased to announce the recent promotion of Troy Marshall to Regional Sales & Technical Manager for Central United States. Hired in 2007 as Sales & Technical Manager for the Rocky Mountain area, Troy will now be responsible for the sales and support of EnvirolineÃ-® and EnvirothaneÃ-® high performance coatings and linings...
Read More »Epoxy Primer meets VOC requirements.
Enviroline 58HS enables users to hold surface preparation for up to 90 days while still meeting VOC requirements. Suited for application on interior or exterior steel, concrete, and masonry surfaces, high-solids product has less than 250 g/l VOCs. Applications include large tanks requiring surface preparation and situations where humid environments exist.
Read More »Epoxy Coating is applied in one coat.
Enviroline 380 ultra-high solids, thick-film epoxy coating exhibits chemical- and solvent-resistance in addition to abrasion- and impact-resistance. It does not require preheating prior to application and is suited for tank and pipe owners as well as contractors.
Read More »Coatings are offered in low-temperature cure versions.
Usable at temperatures down to 32Ã-ºF, Enviroline 375LT high-solids epoxy will cure in 5 days. Enviroline 376F-30LT and Enviroline 376F-60LT are 100% solid epoxy coatings that cure in 7 days at 20Ã-ºF or one day at 45Ã-ºF. Each epoxy is suited for use as lining for storage tanks, process tanks, pipelines, and concrete containment areas in petroleum, chemical processing, and wastewater...
Read More »Heat Resistant Coating resists thermal gradients.
EnvirolineÃ-® 405HT withstands high temperature water, oil, and gas in addition to produced water or seawater. It resists combination of water with high-temperature oil or gas. It features high-solids, single-coat, fast cure technology. Applied at 30-35 mil DFT and exposed to internal temperature of 194Ã-
Read More »Coating provides choice of application speed and cure.
EnvirolineÃ-® 124 is 100% solids epoxy girth weld coating for buried steel pipe, and patch kit for tanks and pipes. It offers owners and applicators choice of application speed and curing results without affecting quality of chemically resistant barrier. Pipe may be backfilled as early as 5 to 7 minutes (tack free). Envirolone 124 is applied by putty knife or trowel.
Read More »Reformulated Primers have lower VOCs.
Improvements to Enviroline(R) 58 and Enviroline(R) 59 include easier mixing, lower VOCs, no need for special thinners, and color changes. Enviroline 58 is now available in tan for greater contrast from IECC topcoats, and Enviroline 59 is lighter color to increase hiding ability of Envirothane(TM) 535 Urethane topcoat. Enviroline 58 is epoxy polyamide rust inhibitive primer; Enviroline 59 is for...
Read More »