RMS Technologies Inc.
Carson City, NV 89706
Share:
Controller System supplies phase currents up to 2 A peak.
Operating from 15-48 Vdc, SIXpack 2 combines 6-axis controller system, microstepping driver, and 3 interface options in one package. It features up to 16x microstepping, limit and reference switches for up to 6 step motors, 6 analog inputs, linear interpolation of up to 6 axes, automatic ramp generation, and on-the-fly changes of position and velocity. RoHS-compliant system is packaged with...
Read More »Microstepping Driver features adjustable on-board trimpot.
Model R701 bipolar step motor driver operates from 24-80 Vdc and supplies phase currents from 1-7 A. Features include 10x microstepping, selectable current reduction of 33%, step frequency of 200 kHz, and optically isolated step, direction, and disable/enable inputs. Trimpot can be adjusted to alter current waveform coming out of motor and going into step motor coils, reducing noise and vibration...
Read More »
Microstepping Driver includes onboard indexer.
Model R325 is capable of ouptut currents from 0.25-3.0 A peak while handling +12-48 Vdc input voltage. Selectable step resolutions include Full, 2, 4, 8, 16, 32, 64, 128, and 256x. In addition to hold current reduction capabilities with adjustable current and timeout settings, unit includes 3 optically isolated inputs and one optically isolated control output that can be used for step, direction,...
Read More »
Microstepping Driver includes onboard indexer.
Capable of output currents from 0.25-3.0 A while handling 12-48 Vdc input voltage, Model R325 offers selectable step resolutions of full, 2x, 4x, 8x, 16x, 32x, 64x, 128x, and 256x. It includes hold current reduction capability with adjustable current and timeout settings. Three optically isolated inputs and 1 optically isolated control output can be used for step, direction, disable/enable, and...
Read More »
Step Motor Driver/Controller features multi-axis control.
R364 3-axis driver/controller provides output currents ranging from 0.2-1.5 A/phase peak, with step resolutions from full, Ã-½, Ã-¼, 1/8, 1/16, 1/32, and 1/64. Unit can be configured and controlled via ASCII interface over either RS232 protocol for single module control or RS485 for multiple module control. Users can store all motor parameters on board with simple ASCII command. R364 also...
Read More »
Bipolar Driver/Controller offers intelligent operation.
Configured and controlled via RS485 communications bus or step and direction inputs, R101 Driver/Controller is capable of producing output current from 0.2-2.5 A/phase with step resolutions from full, Ã-½, Ã-¼, and 1/8. Multiple modules can also be controlled on same bus using different address codes. Product can save all user-configurable parameters to non-volatile memory, which are...
Read More »
Quad-Axis Controller/Driver suits industrial use.
Quadpack 4-Axis Controller/Driver features on-board control interfaces for RS232, RS485, and CAN as well as ability to daisy chain multiple Quadpacks. It provides up to 1.5 A/phase, while smart, multi-level current control keeps motors and drivers cool. Product also offers software selectable step resolutions and automatic 3-phase ramp generation with programmable parameters for maximum frequency...
Read More »Controller System supplies phase currents up to 2 A peak.
Operating from 15-48 Vdc, SIXpack 2 combines 6-axis controller system, microstepping driver, and 3 interface options in one package. It features up to 16x microstepping, limit and reference switches for up to 6 step motors, 6 analog inputs, linear interpolation of up to 6 axes, automatic ramp generation, and on-the-fly changes of position and velocity. RoHS-compliant system is packaged with...
Read More »Microstepping Driver features adjustable on-board trimpot.
Model R701 bipolar step motor driver operates from 24-80 Vdc and supplies phase currents from 1-7 A. Features include 10x microstepping, selectable current reduction of 33%, step frequency of 200 kHz, and optically isolated step, direction, and disable/enable inputs. Trimpot can be adjusted to alter current waveform coming out of motor and going into step motor coils, reducing noise and vibration...
Read More »
Microstepping Driver includes onboard indexer.
Model R325 is capable of ouptut currents from 0.25-3.0 A peak while handling +12-48 Vdc input voltage. Selectable step resolutions include Full, 2, 4, 8, 16, 32, 64, 128, and 256x. In addition to hold current reduction capabilities with adjustable current and timeout settings, unit includes 3 optically isolated inputs and one optically isolated control output that can be used for step, direction,...
Read More »
Microstepping Driver includes onboard indexer.
Capable of output currents from 0.25-3.0 A while handling 12-48 Vdc input voltage, Model R325 offers selectable step resolutions of full, 2x, 4x, 8x, 16x, 32x, 64x, 128x, and 256x. It includes hold current reduction capability with adjustable current and timeout settings. Three optically isolated inputs and 1 optically isolated control output can be used for step, direction, disable/enable, and...
Read More »
Step Motor Driver/Controller features multi-axis control.
R364 3-axis driver/controller provides output currents ranging from 0.2-1.5 A/phase peak, with step resolutions from full, Ã-½, Ã-¼, 1/8, 1/16, 1/32, and 1/64. Unit can be configured and controlled via ASCII interface over either RS232 protocol for single module control or RS485 for multiple module control. Users can store all motor parameters on board with simple ASCII command. R364 also...
Read More »
Bipolar Driver/Controller offers intelligent operation.
Configured and controlled via RS485 communications bus or step and direction inputs, R101 Driver/Controller is capable of producing output current from 0.2-2.5 A/phase with step resolutions from full, Ã-½, Ã-¼, and 1/8. Multiple modules can also be controlled on same bus using different address codes. Product can save all user-configurable parameters to non-volatile memory, which are...
Read More »
Quad-Axis Controller/Driver suits industrial use.
Quadpack 4-Axis Controller/Driver features on-board control interfaces for RS232, RS485, and CAN as well as ability to daisy chain multiple Quadpacks. It provides up to 1.5 A/phase, while smart, multi-level current control keeps motors and drivers cool. Product also offers software selectable step resolutions and automatic 3-phase ramp generation with programmable parameters for maximum frequency...
Read More »