Company News

Advanced Micro Controls Inc

20 Gear Dr., Terryville, CT, 06786, USA

  • 860-585-1254

Latest New Product News from
Advanced Micro Controls Inc

Sensors Monitors & Transducers, Test & Measuring Instruments

NR60 Series Rotary Shaft Encoders feature built-in Ethernet switch.

Mar 20, 2017

Available in single and multi-turn versions, NR60 Series Rotary Shaft Encoders come with built-in EtherNet/IP and Modbus interface. Offering 16 bits (single turn resolution) and 14 bits (number of revolutions) measuring range, units are housed in 60mm diameter package in flange or servo mounting styles. Meeting IP67 ingress protection rating, encoders are used in single-turn and multi-turn... Read More

Controls & Controllers, Electronic Components & Devices

PWM Module is available for Allen-Bradley Point I/O.

Nov 11, 2015

Referenced within Rockwell Automation PartnerNetwork™ Encompass program, 4402 two-channel Pulse Width Modulation (PWM) signal controller for Point I/O™ works with Allen-Bradley PLCs. Module generates square wave pulse signal with 0%–100% programmable duty cycle and 1 Hz to 20 kHz programmable frequency and can also be programmed to add dithering element to PWM output.... Read More

Test & Measuring Instruments

High-Speed DAQ Module works with ControlLogix PLCs.

Aug 28, 2015

Able to acquire data at programmable sample rate of 50 µsec, 5274A plugs into Allen-Bradley ControlLogix™ and programs using RSLogix5000 (Studio 5000). This analog input, high-speed data acquisition (DAQ) module archives data using PLC's registers for analysis or export. Transfer capability of up to 128 samples — on one channel or evenly divided over 4 channels — enables data capture... Read More

Electronic Components & Devices, Test & Measuring Instruments

LVDT/RVDT Signal Conditioner offers interface for networked PLCs.

Mar 16, 2015

AnyNET I/O ANR2 integrates network connection and expansion capabilities to provide LVDT/RVDT feedback solution for any PLC-based system. Allowing users to interface up to 12 LVDT or RVDT sensors using one network connection, product expands up to six 2-channel modules. Interface is programmable via host PLC's software and directly connects to 3-/4-/5-/6-wire and half bridge LVDT sensors... Read More

Computer Hardware & Peripherals, Test & Measuring Instruments

SSI Interface Module supports networked PLCs.

Aug 21, 2014

Integrating network connection and expansion capabilities, AnyNET ANE2 SSI Interface Module provides SSI feedback solution for any PLC-based system. DIN rail-mounted unit expands up to six 2-channel modules, allowing users to interface up to 12 SSI sensors using single network connection. Programming through host controller’s software, interface is compatible with most gray code or binary... Read More

Computer Hardware & Peripherals, Controls & Controllers, Test & Measuring Instruments

Resolver Interface Module communicates with PLC over network.

May 28, 2014

Part of AnyNET I/O family of PLC-based specialty I/O products, ANA2 Resolver Interface Module integrates network connection and expansion capabilities to provide resolver feedback for any PLC-based system. Unit expands up to six 2-channel modules, allowing users to interface up to 12 resolver sensors using single network connection. Mounting on standard DIN rail, module provides 16-bit resolution... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Absolute Encoders support DeviceNet communications.

Feb 20, 2014

Offered in single- and multi-turn versions, NR25 Series is compatible with all devices that support DeviceNet. Rotary sensors provide overall measuring range up to 30 bits total, 16 bits per turn and 12 or 14 bit number of turns. Resolution, count direction, measurement range, velocity format, and position preset are programmable. Offered in flange mount, servo mount, solid shaft, and hub shaft... Read More

Controls & Controllers, Sensors Monitors & Transducers

Resolver Feedback Module facilitates AC drive upgrade.

Jan 28, 2014

Designed to plug into Allen-Bradley PowerFlex® 750-Series AC Drives, Model RD750 eliminates need to replace resolver-equipped motors when upgrading from PowerFlex 700 drives. Module provides single channel resolver interface and variety of diagnostic data using two bi-color LEDs. Critical information such as card-to-drive communication, card-to-resolver connection, and parameter faults are... Read More

Test & Measuring Instruments

Distributed I/O System for PLCs offers mixed specialty functions.

Oct 17, 2013

AnyNET I/O series lets users mix and match functions, including stepper motion control and various sensor interfaces, into one solution that is compatible with any networked PLC/PAC. Programmed through host PLC’s software, solution supports DIN rail mounting, can be programmed without additional software, and allows mixing and matching of up to 6 AnyNET I/O on one network connection.... Read More

Controls & Controllers

Integrated Motion Controller offers Ethernet/IP connectivity.

Sep 12, 2013

To simplify installation and reduce cabling, SMD23E incorporates NEMA frame size 23 stepper motor; 3.4 A, DC-powered microstepping drive; and controller. This out-of-the-box motion control solution communicates with host controller (PLC or PAC) via Ethernet/IP or Modbus-TCP and is programmable via controller's software. While rugged M12 connector option provides SMD23E with standard IP50... Read More

Controls & Controllers

Integrated Motion Control Package has Ethernet interface.

Aug 24, 2012

By incorporating stepper motor, drive, and controller, SMD23E simplifies installation and reduces cabling requirements. Integrated solution communicates with host controller (PLC or PAC) via EtherNet/IP or Modbus-TCP and is programmed through host controller's software. Suited for new installations or upgrades, control package includes NEMA frame size 23 stepper motor; 3.4 A, DC-powered... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Absolute Encoders support Profibus-DP communication.

May 29, 2012

Comprised of heavy-duty rotary sensors, resolver-based NR25 series offers overall measuring range of 16 bits (single-turn resolution) plus 12 or 14 bits (number of revolutions). Absolute single- and multi-turn versions, compatible with all PLCs that support Profibus-DP, deliver up to 30-bit (65,536 steps x 16,384 revolutions) resolution and come in IP67-rated, 2.5 in. dia package with 3 M12... Read More

Controls & Controllers

Stepper Indexer/Drivers include Modbus TCP connectivity.

Dec 07, 2011

Configured through host PLC software, Models SD31045E and SD17060E eliminate need for plug-in card and provide up to 4.5 or 6.0 Arms output current, respectively. AC line powered devices feature stepper/servo hybrid technology with built-in indexer, 3 configurable auxiliary inputs, and choice of open or closed loop control modes. In addition to Ethernet-based connectivity, drives provide encoder... Read More

Controls & Controllers

Motion Control Modules offer budget friendly options.

Jun 09, 2011

Developed specifically as affordable solutions for adding motion (stepper or servo) to Allen-Bradley PLCs, single axis 3401L modules for Point/IO and 2-axis 3602 modules for CompactLogix meet Rockwell Automation's performance requirements. Model 3401L features 2 discrete inputs and controls velocity and position of stepper motor, while 3602 modules include additional axis of motion and... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Rotary Encoders support Modbus TCP/IP.

May 25, 2011

Available in single-turn and multi-turn versions, NR25 Series provides up to 30-bit resolution. Resolver-based units come in 2.5 in. diameter IP67-rated package with PoE as standard. PC-based GUI is included to set IP address, position resolution, counting direction, velocity format, and preset value through Ethernet network. For troubleshooting, encoders have LEDs that display diagnostic... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Rotary Encoders withstand extreme conditions.

Aug 02, 2010

Available with stainless steel housing and IP67 or IP69K rating, DuraCoders® are protected against high-pressure and high-temperature washdowns and liquid ingress from immersion in water or contaminants. Units come with 2.5 in. housing and double row sealed bearing. Offered in solid shaft and hub shaft models, encoders provide shaft loadings up to 100 lb radial and 50 lb axial. SSI, Digital,... Read More

Sensors Monitors & Transducers

EtherNet/IP Resolver works with any Allen Bradley PLC.

Jul 01, 2010

Comprised of networked rotary sensors available in absolute single- and multi-turn versions, heavy-duty NR25 series provide overall measuring range of 16 bits (single-turn resolution) plus 14 bits (number of revolutions) for 30 bits total. PoE-enabled products, designed to ODVA guidelines, come in solid shaft and hub shaft versions. Position resolution, counting direction, velocity format, and... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

EtherNet/IP Encoder comes in single- and multi-turn versions.

Jun 08, 2010

Comprised of heavy-duty, absolute, EtherNet/IP DuraCoder® encoders, NR25 series provide overall measuring range of 16 bits (single-turn resolution) plus 14 bits (number of revolutions). Each networked rotary sensor is designed in accordance with ODVA guidelines, supports PoE, and is offered in 2.5 in. dia package with two M12 connectors on back. Ability to program with implicit and explicit... Read More

Computer Hardware & Peripherals, Test & Measuring Instruments

Interface Modules expand controller I/O functionality.

Apr 01, 2010

Available in 1 and 2 channel models, AMCI 7160 Series SSI Modules enable user to expand 1762 MicroLogix(TM) controllers by adding ability to monitor rotary and linear applications. AMCI 7161 and 7162 provide up to 32-bit resolution, with selectable data format of either binary or gray code. Resolution is limited only by resolution of SSI sensor, and provides user with scaled data, actual SSI... Read More

Controls & Controllers

UL-Listed Stepper Drives suit OEMs and machine builders.

Feb 25, 2010

Tested by UL to recognized safety standards, SD17040/SD31045/SD17060 series are rated for operation in ambient temperatures from 0 to +50°C and provide range of features: network connectivity, onboard indexers, encoder feedback, and simplified set-up. Self-contained products have their own power supplies and offer 4.0-9.8 Amp RMS output current. Additionally, high-voltage version is available... Read More

Other Company News from
Advanced Micro Controls Inc