Company News

The Hollaender Mfg. Co.

10285 Wayne Ave., Cincinnati, OH, 45215, US

  • 800-772-8800

Marketing:
Leah Weller
Marketing Coordinator
USA
Phone: 513-772-8800 ext 123
E-mail this person

Public Relations:
Jeffry Caudill
President
Gingerquill, Inc.
USA
Phone: 513-448-1140
E-mail this person

Share Like Tweet Add Email

Latest New Product News from
Hollaender Mfg. Co., The

Fluid & Gas Flow Equipment, Green & Clean

Tee and Elbow Fittings hold solar pipe rack secure. .

July 15, 2015

Comprising 5EX-8 tee and 5EXT-8 tee for 1 ½ in. IPS pipe and 5X-9 tee and 17X-9 adjustable tee/elbow for 2 in. IPS pipe, Speed-Rail® Fittings are used for installation of solar racking systems in areas that experience extreme wind. Slip-on pipe fittings feature 2 set screws in vertical barrel, set at 90° to one another, producing maximum pullout resistance. Made of 535.0 aluminum-magnesium, corrosion-resistant units are suited for aluminum, galvanized steel, stainless steel, or black iron pipe. Read More

Safety & Security Equipment

Modular Safety Rail System comes in steel and aluminum.

May 5, 2014

Bumble-Bee® is available as powder coated steel system with black fittings and yellow pipe as well as mill finished aluminum version. With no welding required, system installs in as little as 15 min. Standard kit configurations include straight stand-alone sections of 4, 6, and 8 ft; corner section; and extension kits of 4, 6, and 8 ft. Each kit comes with pipe cut to size, fittings, installation instructions, hex key, base flanges, and test results showing OSHA compliance.
Read More

Architectural and Civil Engineering Products

Glass Panel Railing System maximizes visibility and transparency.

April 18, 2013

Constructed using aluminum Interna-Rail handrail, 3/8 in. tempered glass or acrylic resin panels, panel clips, and bottom support channels, Interna-Rail® VUE™ modular, post-mounted, in-line pipe and fitting based handrail system does not require any mid-rails and can be designed to meet any building code. Fittings and pipe come standard with clear anodized finish on dark bronze aluminum. Optionally, system can be powder coated to AAMA 2604 specifications or Kynar® coated.
Read More

Fluid & Gas Flow Equipment, Green & Clean

Solar Pipe Rack Fittings increase wind load resistance.

February 20, 2013

Designed for installation of solar racking systems, Speed-Rail® fittings include tee and elbow for use with 2 in. IPS pipe. Dual integrated internal/external reverse-knurl cup-point set screws securely attach fittings to pipe and provide resistance to loosening and pullout. Testing on 2 in. IPS fitting shows pullout capacity from 3,900–8,200 lb on galvanized pipe. Available in fixed and adjustable configurations, fittings are made of 535.0 aluminum-magnesium. Read More

Mounting & Attaching Products, Architectural and Civil Engineering Products

Architectural Railing Brackets are suited for indoor or outdoor use.

March 22, 2011

Part of Interna-Rail® and Speed-Rail® lines, Model 87-8 is designed to attach various sizes of handrail to 1½ in. IPS railing posts, while Model 88-8 uses same components with larger mounting plate to attach handrail to wall. Both fittings are machined from aluminum alloy 6063 and feature clear anodized finish as standard. Brackets can also be supplied in dark bronze anodizing finish, mill finish, or powder coated finish. All hardware fasteners are 304 stainless steel. Read More

Safety & Security Equipment, Green & Clean, Mounting & Attaching Products

Solar Racking Roof Mount Flange installs to narrow gauge metal roofing.

January 14, 2011

Available in 1½ in. IPS size, 47R flange has 6 x 8½ in. footprint and can be used to attach solar racking systems and railings to narrow gauge metal roofing. Design ensures adequate pullout force and torque resistance via use of 22, 5/16 in. mounting holes that take ¼ in. TEK screws. Passing IBC code of 50 lb per linear foot, flange can be used to mount roof attached railing systems. Set screws are incorporated in base, ensuring maximum pullout force. Read More

Architectural and Civil Engineering Products

Infill Panel Installation Kit brings railings up to code.

March 4, 2009

Designed for builders, architects, and building managers, Infill Panel Installation Kit contains everything needed to retrofit non-conforming 2- and 3-line railing systems with infill panels to bring systems up to IBC specifications. It includes rivsert that is inserted into existing post or rail, 1 7/8 in. long Hollaender 146 panel connector, and 3 in. long button head cap screw that fastens panel and connector to rivsert. Virtually any type of infill panel can be attached. Read More

Architectural and Civil Engineering Products

Glass Infill Panel enhances aluminum handrail systems.

January 22, 2009

Glass infill panel railing system is designed to work with Speed-Rail® and Interna-Rail® aluminum handrail systems. Made of 3/8 in. thick tempered glass, panels attach to handrail using 2-piece panel mounting clips that are made of corrosion-resistant, anodized aluminum and hold glass panels firmly in place from top and bottom to eliminate downward sagging or slippage. Product promotes flexible design options for builders and architects. Read More

Safety & Security Equipment, Fluid & Gas Flow Equipment, Architectural and Civil Engineering Products

Aluminum Picket Railing System requires no welding.

November 13, 2008

Suitable for any indoor or outdoor project, Aluminum Picket Railing System is made possible by Speed-Rail® fitting No. 156-85, a friction-fit picket tee that firmly attaches pickets to top and bottom horizontal rails. Machined from 6063-T6 aluminum alloy, fitting attaches ¾ in. IPS pickets to 1½ in. IPS aluminum pipe. Variety of infill panels are available, including picket, perforated, and wire mesh. Read More

Fluid & Gas Flow Equipment, Non-Industrial Products

Pipe Fittings give retail stores industrial look.

June 18, 2008

Offered as slip-on pipe fitting system, Rough Tumbled Finish Speed-Rail® is designed for edgy and urban-themed retail stores desiring distressed, industrial-type fixture. Fittings are made of corrosion-resistant aluminum alloy and come in various sizes and configurations. They accommodate 5 pipe sizes from ¾ in. IPS (actual OD of 1.05 in.) to 2 in. IPS (actual OD of 2.375 in.). Read More

Safety & Security Equipment, Fluid & Gas Flow Equipment

Modular Fitting is designed for retail wall racking systems.

April 10, 2008

Made of high tensile strength aluminum/magnesium alloy 535, 2-piece Model 104S-6 Side Outlet Cross Modular Fitting can be used in any structural application using 1 in. IPS components. Electrolytic corrosion free alloy can be used with other metal, including carbon or stainless steel. It can attach to and detach from existing structures, and are intended for modifying or upgrading existing structures without major disassembly. Read More

  • 1

Other Company News from
Hollaender Mfg. Co., The

June 13, 2008

Heartland Payment Center

October 30, 2007

Ovec Handrail Project