Company News

Wanner Engineering, Inc.

1204 Chestnut Ave., Minneapolis, MN, 55403, USA

  • 612-332-5681

Latest New Product News from
Wanner Engineering, Inc.

Fluid & Gas Flow Equipment

Q155 Series Quintuplex Pumps eliminate hazardous VOC emissions.

April 29, 2017

Q155 Series Quintuplex Pumps are suitable in Reverse Osmosis in water and wastewater treatment, mine dewatering, salt water disposal and salt water injection applications. Available in two models Q155K and Q155M with maximum flow rate of 78 gpm and 65 gpm respectively. Units feature multiple-diaphragm design for virtually pulse-free and linear flow. Having 3000 psi and 3500 psi discharge... Read More

Fluid & Gas Flow Equipment

Low-Pressure, Seal-Less Pumps have zero leakage design.

August 17, 2016

Respectively, Hydra-Cell Quintuplex Q155E, Q155F, and Q155H models offer max flow rates of 157, 127, and 111 gpm and max discharge pressures of 1,500, 1,850, and 2,100 psi. Multiple-diaphragm design provides virtually pulse-free, linear flow, and hydraulically-balanced diaphragms enable pump to handle high pressures with low stress and pump hot, abrasive fluids. Pumps are packing-free, can run... Read More

Computer Hardware & Peripherals, Controls & Controllers

Touchscreen Pump Controller features built-in programming.

May 3, 2016

Providing motor speed control for Hydra-Cell® pumps, Control Freak™ allows user to enter desired flow rate or volume in gallons or liters and system pressure in psi or bar. Controller then automatically runs pump manually at desired flow rate or volume total/time, or in pre-set batches. Featuring variable frequency drive, unit can control up to 6 pumps with 1 screen and 10 separate batch... Read More

Fluid & Gas Flow Equipment

Metering Pumps offer brass manifold option.

March 28, 2016

Available in 6 models with max flow capacities from 26.5–894.6 gph and max pressure ratings from 1,000–2,500 psi, Hydra-Cell Metering Solutions Pumps are available with Alfas® copolymer elastomer diaphragms, which are resistant to extreme heat, acids, and alkalis. Spring-loaded, horizontal disk check valves and seal-less design enable pumps to handle viscous fluids and abrasive... Read More

Fluid & Gas Flow Equipment

Peristaltic Pump handles difficult fluids.

February 22, 2016

Featuring max flow rate of 14.1 gpm and max discharge pressure of 60 psig, Vector 2006 can move high-viscosity fluids up to 15,000 cP. Pump can handle pasty, pulpy, thick, abrasive, and corrosive solutions as well as fluid containing compressible solids up to 27 mm in size. Self-priming unit offers suction lift capability of 24 ft. Unlike other peristaltic pumps, Vector 2006 features... Read More

Fluid & Gas Flow Equipment

Sealless Pumps operate at up to 1,500 psi discharge pressure.

January 22, 2016

With metallic pump heads, Hydra-Cell D10 models have 4.26 gpm flow capacity with motor speed of 790 rpm when performing at high pressure rating. There are no mechanical seals, cups, or packing to leak, wear, or replace. Spring-loaded, horizontal disk check valves and sealless design enable handling of viscous fluids and abrasive particulates up to 500 microns in size. Also included,... Read More

Fluid & Gas Flow Equipment

Metering Pumps with Gearbox Reducers are designed for accuracy.

November 19, 2015

Model P200 Hydra-Cell® Metering Solutions pumps feature gearbox reducers with ratios from 60:1 to 5:1. Pumps, combined with VFD electronic flow adjustment, provide precise flow throughout turndown range at up to 81.0 gph at pressure ratings to 350 psi for non-metallic pump heads and 1,000 psi for metallic pump heads. Features include pulse-minimizing, multiple-diaphragm design;... Read More

Fluid & Gas Flow Equipment

Seal-Free Multi-Diaphragm Pump delivers zero-leakage operation.

October 13, 2015

Offering flow rates up to 96 gpm at pressures up to 1,500 psi, packing-free T80100 Hydra-Cell® provides virtually pulse-free, linear flow and can replace horizontal multi-stage centrifugal pumps and packed plunger pumps in oil and gas applications. Sealless design features multiple hydraulically balanced diaphragms and can run dry without damage, operate with closed or blocked suction line,... Read More

Fluid & Gas Flow Equipment

Sealless Triplex Pumps feature packing-free design.

June 24, 2010

Featuring double-ended shaft to accommodate various installation options, Hydra-Cell T80 Series employs asynchronous, hydraulically-balanced diaphragms with valve system that allows diaphragms to be hydraulically coupled to displacing plungers with no mechanical coupling required. Zero-leakage units can run dry without damage, will operate with closed or blocked suction line, and can pump... Read More

Fluid & Gas Flow Equipment

Diaphragm Valve handles dirty fluids.

February 8, 2007

Featuring heavy-duty construction and immediate response, Hydra-Cell C64 provides pressure as high as 2,500 psi with flow up to 40 gpm. Seal-less design eliminates need for valve plunger seals, while flow-through design minimizes wear on internal parts. Available in brass and stainless steel, pressure regulating valve suits applications requiring high pressure pumping of dirty fluids. Read More

Fluid & Gas Flow Equipment

Sealless Centrifugal Pumps feature non-metallic design.

December 8, 2006

Stan-Cor MK Series, comprised of ANSI centrifugal pumps, features hydraulically-balanced operation to reduce bearing failures by eliminating thrust loads. Able to handle harsh chemicals, pumps come in 3 sizes with 60 Hz operation at up to 3,500 rpm and 330 gpm or 50 Hz operation at up to 2,900 rpm and 62 M³/hr. Construction includes carbon fiber-filled Kynar pump casing as well as... Read More

Material Handling & Storage

Pulsation Dampener minimizes hydraulic shock in pump system.

October 11, 2006

Available in 4 sizes, Hydra-Cell Pulsation Dampeners protect pipes, valves, fittings, meters, and in-line instrumentation of Hydra-Cell series positive displacement pumps by producing steady, continuous fluid flow up to 99% free of pulsation and vibration. Bodies are chemical-resistant, and pressure ranges are available up to 4,000 psi. By reducing agitation, foaming, splashing, and degradation,... Read More

Fluid & Gas Flow Equipment

Pumps use airbleed priming valves to relieve trapped vapors.

May 22, 2006

Series C80 Valves automatically open to allow Hydra-Cell F/G-20 through D/G-12 Series Pumps to self-prime by relieving system of trapped vapors or air rather than causing pump airlock. Valves automatically close to provide immediate full system pressure. Mounting horizontally or vertically, valves operate in systems with minimum discharge pressure of 75 psi and handle pressures up to 2,500 psi.... Read More

Fluid & Gas Flow Equipment

Peristaltic Pumps transfer challenging liquids.

January 6, 2006

Featuring roller and shoe design, Vector Series 3005 is equipped with lubrication-filled cavity for constant lubrication and is capable of continuous duty pumping of harsh liquids up to 200 psi. Pumps handle fluids with viscosity up to 100,000 cps at temperatures up to 180°F, and can also handle solids up to 0.6 in. and fibers up to 4 in. in length. With heavy-duty roller bearings and complete... Read More

Fluid & Gas Flow Equipment

Industrial Pumps use Diaphragm Position Control technology.

November 18, 2005

Featuring dry running capabilities, self-priming D/G/M03 Kel-Cell series utilizes DPC technology to control position of Buna-n or Viton® diaphragm and provide diaphragm rupture protection under adverse inlet conditions. Industrial pumps can be close-coupled to NEMA 56c faced or metric motors as well as belt-driven. They provide max capacity of 3.0 gpm @ 1,750 rpm, max inlet pressure of 250... Read More

Fluid & Gas Flow Equipment

Metering Pumps provide dosing to 2,220 gph.

June 29, 2005

Positive displacement Series D35 handles range of media from ultra pure fluids to corrosives and slurries at pressures up to 1,200 psi. Units incorporate 5 Hydra-Cells into pentaplex design, enabling pulse-free flow under demanding conditions. Featuring tapered roller bearings and seal-less design, self-priming pumps run dry without damage and provide quiet operation. Optional oil level monitor... Read More

Fluid & Gas Flow Equipment

Sealless Diaphragm Valves suit heavy-duty applications.

May 20, 2005

Available in stainless steel, nickel alloy, or solid brass, Hydra-Cell C60 Series regulating valves balance system pressure for multiple-gun operations. Design consists of tapered plunger with valve seat, all isolated by Viton or Teflon® diaphragm between wet end of valve and valve top. When system discharge is completely closed, valve bypasses total system fluid flow to prevent excess system... Read More

Fluid & Gas Flow Equipment

Industrial Pumps protect against diaphragm ruptures.

February 25, 2005

Kel-Cell Series D/G35 provides steady, pulse-free flow up to 37 gpm and pressure up to 1,200 psi. Diaphragm Position Control technology minimizes possibility of incidental diaphragm failure caused by adverse system conditions that often result in excessive vacuum conditions on pump inlet. Series is suited for applications ranging from ultrapure fluids to corrosives and slurries. Read More

Fluid & Gas Flow Equipment

Centrifugal Pumps feature double cartridge seals.

January 20, 2005

Suited for corrosive and abrasive materials, Series 1700 Seals on Stan-Cor Centrifugal Pumps are hydraulically-balanced and feature cassette-within-a-cartridge design. Removable inner cassette allows gland to be reused with each new seal. Friction drive lock ring with cap screw assures alignment and eliminates slippage to facilitate installation. Self-centering locators are internal to seal and... Read More

Fluid & Gas Flow Equipment

Pump utilizes Diaphragm Position Control technology.

December 29, 2004

Series H/G25 Kel-Cell® uses DPC technology to control diaphragm position under adverse inlet conditions. This reduces possibility of incidental diaphragm failure/rupture caused by conditions that result in excessive vacuum conditions on pump inlet. Industrial pump provides flow to 20 gpm and pressure to 1,000 psi. Read More

Other Company News from
Wanner Engineering, Inc.