Pericom Technology Inc.
San Jose, CA 95134
Share:
Driver ICs offer optimized signal integrity capabilities.
In addition to PCIe 5 Gbps applications, 5904 and 5964 ReDriver(TM) ICs can operate in non-protocol-specific or proprietary-protocol applications. Optimized for output drive capability, ICs come in LBGA package (5904) with programmable settings of transmit and receive equalization and output swing via both external pin strapping and IÃ-²C/SM bus programming or TQFN package (5964) with...
Read More »
ReDriver ICs are PCIe-® 2.0-certified for signal integrity.
SATA-2 ReDrivers are signal conditioning products for connecting external SATA 3 Gbps HDD to PC, notebook, digital set top box, and server systems. Models PI3EQX3811, PI3EQX3851, and PI3EQX4951 offer 3.3 V operation and differential signal conditioning at 3.0 Gbps, while PI2EQX5804 and PI2EQX5864 devices operate from 1.2 V supply voltage. All are 1-port ICs that connect to HDD across long cable...
Read More »Crystal Oscillators target 10 GbE, PON, and SAS applications.
Providing timing reference of up to 220 MHz, 2.5/3.3 V SX/SN series and 3.3 V SD/SH series XP crystal oscillators offer 0.25 psec rms phase jitter for high-frequency 2.5 and 3.3 V CMOS/PECL clock applications. Units use bulk acoustic wave crystal devices for optimized stability performance. Also, products are drop-in compatible with Overtone-, SAW-, and PLL-based oscillators in 4-pin 5 x 7 mm,...
Read More »Graphics Switch supports PCIeG2 and DP architectures.
Housed in 5 x 11 mm, 56-TQFN package, PI3PCIE2612-A/B provides point-to-point connections between PC chipsets and DisplayPortÃ-® connector or x16 PCIeG2 slot for external graphics cards. With bandwidth of 2.5 GHz at -5 dB, device is equipped to handle DP signals at 2.7 Gbps and PCIeG2 signals at 5.0 Gbps. Low crosstalk of -35 dB at 2.5 GHz minimizes transmission noise, while high isolation of...
Read More »Clock Buffers support 5.0 Gbps serial connectivity.
Designed to meet reference clock requirements of Fully Buffered DIMM memory modules, zero-delay PCIe Gen2 Clock Buffers provide less than 1 picosecond additive rms jitter. They support IntelÃ-® XeonÃ-® Dual Core processor workstation and server applications with as few as 4 or as many as 19 separate PCIe outputs provided by single IC. Featuring Pb-free and Green packaging, complete line...
Read More »Signal Switches operate at PCIe Gen2 data rate of 5 GBps.
Providing Vcc operating range of 1.5-2.0 V, Signal Switches operate at PHY layer, and are used for I/O slot configuration in volume workstation, server, desktop video and gaming, storage, and telecom market segments. Model PI2PCIE2412 is 2-lane switch that provides 2:1 mux/demux operation via single select control, while Model PI2PCIE2422 provides bypass capability in addition to 2:1 mux/demux...
Read More »PCI Express Packet Switch has small-footprint design.
Measuring 12 x 12 mm, 4-Port/4-Lane PI7C9X20404GP is joined in GreenPacket(TM) series by 5-Port/5-Lane PI7C9X20505GP and 5-Port/8-Lane PI7C9X20508GP. Each RoHS-compliant model allow users to fully leverage CPU chipset I/O expansion in PCIe-based platform designs or upgrade existing motherboard and related platforms. Optimized PCB layout design for these packet switches meets requirements of...
Read More »HDMI Switches are designed for video applications.
With 16-bit deep color support (3.3 Gbps), PI3HDMI412FT-A, PI3HDMI1212, PI3HDMI413-A, and PI3HDMI414 are high-definition multimedia interface (HDMI) Rev 1.3-compliant switches that can connect various high performance HD source products to one HD video display. These differential signal switches, supplied in Pb-free packaging, are designed with technology used to achieve specific impedance...
Read More »PCI-X Bridge IC offers transparent/non-transparent modes.
Supporting single x4 PCIe port to single PCI-X domain, Model PI7X9X130 is fully reversible and operates in 133 MHz PCI-X or 66 MHz PCI modes. It includes 5 V tolerant I/O pins, 512 Byte capable payload size, 6 PCI/PCI-X Masters, and 7 GPIO pins. Compliant with PCISIG PCIe revision 1.1 and PCI-X Bridge 2.0a specifications, bridge is suited for motherboard-based servers, HBA and NIC cards, data...
Read More »Packet Switches feature 4 port and lane count configurations.
PCIe Packet24(TM) packet switches include 4-Port/24 Lane, 3-Port/24 Lane, 4-Port/16 Lane, and 3-Port/12 Lane devices. Meeting PCI-SIG PCIe 1.1 and PCI 1.2 requirements, switches feature attributes-data reporting, low-power and power-down modes, and programmable lane assignments for x4 or x8 lane width capability on per-port basis. Devices suit blade and motherboard-based server, data storage, PC...
Read More »Driver ICs offer optimized signal integrity capabilities.
In addition to PCIe 5 Gbps applications, 5904 and 5964 ReDriver(TM) ICs can operate in non-protocol-specific or proprietary-protocol applications. Optimized for output drive capability, ICs come in LBGA package (5904) with programmable settings of transmit and receive equalization and output swing via both external pin strapping and IÃ-²C/SM bus programming or TQFN package (5964) with...
Read More »
ReDriver ICs are PCIe-® 2.0-certified for signal integrity.
SATA-2 ReDrivers are signal conditioning products for connecting external SATA 3 Gbps HDD to PC, notebook, digital set top box, and server systems. Models PI3EQX3811, PI3EQX3851, and PI3EQX4951 offer 3.3 V operation and differential signal conditioning at 3.0 Gbps, while PI2EQX5804 and PI2EQX5864 devices operate from 1.2 V supply voltage. All are 1-port ICs that connect to HDD across long cable...
Read More »Crystal Oscillators target 10 GbE, PON, and SAS applications.
Providing timing reference of up to 220 MHz, 2.5/3.3 V SX/SN series and 3.3 V SD/SH series XP crystal oscillators offer 0.25 psec rms phase jitter for high-frequency 2.5 and 3.3 V CMOS/PECL clock applications. Units use bulk acoustic wave crystal devices for optimized stability performance. Also, products are drop-in compatible with Overtone-, SAW-, and PLL-based oscillators in 4-pin 5 x 7 mm,...
Read More »Graphics Switch supports PCIeG2 and DP architectures.
Housed in 5 x 11 mm, 56-TQFN package, PI3PCIE2612-A/B provides point-to-point connections between PC chipsets and DisplayPortÃ-® connector or x16 PCIeG2 slot for external graphics cards. With bandwidth of 2.5 GHz at -5 dB, device is equipped to handle DP signals at 2.7 Gbps and PCIeG2 signals at 5.0 Gbps. Low crosstalk of -35 dB at 2.5 GHz minimizes transmission noise, while high isolation of...
Read More »Pericom Semiconductor Leads Vertical Integration in Frequency Control Products with Combination of SaRonix(TM) and eCera(TM) Subsidiaries
Wholly-owned subsidiary first to provide total timing solutions based on both quartz and silicon, resulting in optimal cost and performance for the customer SAN JOSE, Calif. - August 27, 2007 - Pericom Semiconductor Corporation (NASDAQ: PSEM), a worldwide preferred supplier of interconnect solutions used for switching, timing, bridging, and conditioning of high-speed serial signals, today...
Read More »Clock Buffers support 5.0 Gbps serial connectivity.
Designed to meet reference clock requirements of Fully Buffered DIMM memory modules, zero-delay PCIe Gen2 Clock Buffers provide less than 1 picosecond additive rms jitter. They support IntelÃ-® XeonÃ-® Dual Core processor workstation and server applications with as few as 4 or as many as 19 separate PCIe outputs provided by single IC. Featuring Pb-free and Green packaging, complete line...
Read More »Signal Switches operate at PCIe Gen2 data rate of 5 GBps.
Providing Vcc operating range of 1.5-2.0 V, Signal Switches operate at PHY layer, and are used for I/O slot configuration in volume workstation, server, desktop video and gaming, storage, and telecom market segments. Model PI2PCIE2412 is 2-lane switch that provides 2:1 mux/demux operation via single select control, while Model PI2PCIE2422 provides bypass capability in addition to 2:1 mux/demux...
Read More »PCI Express Packet Switch has small-footprint design.
Measuring 12 x 12 mm, 4-Port/4-Lane PI7C9X20404GP is joined in GreenPacket(TM) series by 5-Port/5-Lane PI7C9X20505GP and 5-Port/8-Lane PI7C9X20508GP. Each RoHS-compliant model allow users to fully leverage CPU chipset I/O expansion in PCIe-based platform designs or upgrade existing motherboard and related platforms. Optimized PCB layout design for these packet switches meets requirements of...
Read More »HDMI Switches are designed for video applications.
With 16-bit deep color support (3.3 Gbps), PI3HDMI412FT-A, PI3HDMI1212, PI3HDMI413-A, and PI3HDMI414 are high-definition multimedia interface (HDMI) Rev 1.3-compliant switches that can connect various high performance HD source products to one HD video display. These differential signal switches, supplied in Pb-free packaging, are designed with technology used to achieve specific impedance...
Read More »PCI-X Bridge IC offers transparent/non-transparent modes.
Supporting single x4 PCIe port to single PCI-X domain, Model PI7X9X130 is fully reversible and operates in 133 MHz PCI-X or 66 MHz PCI modes. It includes 5 V tolerant I/O pins, 512 Byte capable payload size, 6 PCI/PCI-X Masters, and 7 GPIO pins. Compliant with PCISIG PCIe revision 1.1 and PCI-X Bridge 2.0a specifications, bridge is suited for motherboard-based servers, HBA and NIC cards, data...
Read More »