Company News

Pasternack Enterprises

17802 Fitch, Irvine, CA, 92614, USA

  • 866-727-8376

Latest New Product News from
Pasternack Enterprises

Communication Systems & Equipment, Mechanical Power Transmission

Low Phase Noise Amplifiers meet MIL-STD-883 standards.

April 18, 2017

Available in models ranging from 1.5 to 18 GHz frequency with -180 dBc/Hz offset residual phase noise at 10 KHz, Low Phase Noise Amplifiers are suitable for electronic warfare, VSAT and radar applications. Offering 9 to 14 dB of small signal gain with 5.5 dB noise figure, units are housed in gold-over-nickel-plated Kovar™ metal drop-in packages. Having Psat levels from +16 to +25 dBm range,... Read More

Electrical Equipment & Systems

VNA Test Cables feature Nomex® outer sleeve.

April 13, 2017

Available in 6 and 12 in. lengths with male-to-male or male-to-female configurations, VNA Test Cables provides precise results for testing with coaxial cable and 1.0 mm stainless steel connector interfaces. Operated at up to 110 GHz in -65°C to +125°C temperature range, units feature 50 Ohm impedance and 1.5:1 maximum VSWR. Suitable for semiconductor probe testing, automotive and military... Read More

Materials & Material Processing

IQ Mixer Modules come in Kovar™ drop-in metal package.

April 7, 2017

Used in point-to-point and point-to-multipoint radio, VSAT, Military Radar, EW, Satellite communications, sensors applications, IQ Mixer Modules are designed with 90° hybrid and 0° splitter/combiner. Offering image rejection up to 35 dB and LO to RF Isolation up to 42 dB, units LO drive power ranges from +15 to +19 dBm. Meeting RoHS and MIL-STD-883 standards, Mixers are configurable as image... Read More

Electrical Equipment & Systems, Optics & Photonics

PEM010 Millimeter Wave Transmitter Module features WR-15 waveguide port.

March 20, 2017

Operated in 57.0 to 64.8 GHz frequency spectrum, PEM010 Millimeter Wave Transmitter Module offers 38 dB gain, +12 dBm output P1dB and 34 dB image rejection up to 1.8 GHz modulation bandwidth. Providing -111 dBc/Hz offset phase noise at 10 MHz, transmitter uses two reference clocks for setting 540 MHz or 500 MHz channel spacing. Units are used in wireless gigabit Ethernet data communications... Read More

Communication Systems & Equipment

PLL Frequency Synthesizers support functional LED indicators.

January 11, 2017

Available in models ranging from 25 MHz to 27 GHz frequency bands, Phase Locked Loop Frequency Synthesizers offer 10 to 19 dBm output power and adjustable attenuation of 50 dB in 1 dB steps. Providing -108 dBc/Hz offset phase noise at 100 MHz and  phase lock speed of 1 msec, units support functional LED indicators. Featuring 50 MHz internal frequency source, synthesizers are used in signal... Read More

Communication Systems & Equipment, Electronic Components & Devices

Direct Read Attenuators allow repeatable millimeter wave measurements.

December 17, 2016

Available in WR-42 to WR-10 waveguide standards and operating in 18GHz to 110GHz frequency range, Direct Read Attenuators provide 0dB to 50dB attenuation range with insertion loss of 0.5dB to 1dB. Featuring easy-to-read drum scale, military standard UG style flanges, units deliver ±2% attenuation accuracy and are suitable for aerospace, defense, instrumentation and medical industries.

Read More

Electronic Components & Devices, Mounting & Attaching Products

MMBX Connectors and Adapters operates at 12.4 GHz frequency.

November 11, 2016

Used in the field of telecom, consumer products and industries, MMBX Connectors and Adapters are used in PCB-to-PCB connection and coax-to-PCB connections. Device works at maximum operating frequency of 12.4 GHz with VSWR of 1.06:1 and has maximum tolerance of 0.7 mm. Connectors and Adapters come with gold plated beryllium copper contacts.

Read More

Electronic Components & Devices

Analog Phase Shifters housed in rugged Kovar packages.

November 11, 2016

Suitable for radar systems and test equipment, Analog Phase Shifters operate on analog control voltage ranging from 0V to +5V. PE82P2000 and PE82P2001 Phase Shifters support a modulation bandwidth of 50 MHz. PE82P2000 covers 5 GHz to 18 GHz providing monotonic phase shift range of 0° to 400° typical and 7dB insertion loss. PE82P2001 covers 6 GHz to 15 GHz with monotonic phase shift range... Read More

Electronic Components & Devices

PE88X-Series Active Frequency Multipliers doubles input frequency.

October 28, 2016

Eliminating need for external LO buffer amplifier stage and additional circuitry, active frequency multipliers require single +5 V DC supply. Producing output power level up to +17 dBm, unit offers DC blocked input/output RF ports. Utilizing efficient GaAs PHEMT semiconductor technology, device offers output frequencies from 8 GHz to 46 GHz and input frequencies from 4 GHz to 23 GHz. Applications... Read More

Electronic Components & Devices

Analog Phase Shifters support frequency bands from 5-18 GHz.

October 18, 2016

Used to control phase characteristics in processing of microwave signals, PE82P2000 and PE82P2001 can also be used as phase modulators to control modulating baseband signal. MIL-Spec compliant units come in rugged, hermetically sealed Kovar packages with gold-over-nickel plating. Respectively, PE82P2000 and PE82P2001 cover 5–18 GHz and 6–15 GHz with continuously variable and... Read More

Communication Systems & Equipment

New Pasternack Waveguide Directional Couplers offer highly accurate performance up to 33 GHz.

September 28, 2016

Featuring 74 unique models and spanning a frequency range of 5.85 GHz to 33 GHz, Waveguide directional couplers come in two physical configurations including “Crossguide” and “Broadwall” versions and offer either UG-style or CPR-style flanges. Presented in sizes ranging from WR-137 to WR-34 and offered in 10, 20, 30, 40 and 50 dB coupling levels with full waveguide operational bandwidth,... Read More

Communication Systems & Equipment, Electrical Equipment & Systems

Radar Demonstration Kits covering 2.4 GHz ISM frequency band.

September 7, 2016

Used for classroom instruction or R&D, PEM11000-KIT and PEM11002-KIT can be used to study and learn about principles of microwave radar object detection, motion detection, and determining object range. Experimental radar operating modes can be selected for CW, FMSW, or Doppler, and output waveforms can be set for Single Tone, Frequency Ramp, or Sawtooth. Kit contains all digital and RF... Read More

Electronic Components & Devices

High-Rel Frequency Dividers cover 0.5-18 GHz range.

August 26, 2016

Available in 2, 4, 5, 8, and 10 divide-by-prescaler configurations, Frequency Divider Modules utilize GaAs HBT MMIC semiconductor technology that produces low additive single sideband phase noise performance with typical levels down to -155 dBc/Hz at 100 KHz offset. Input power ranges from -20 to +10 dBm with output power ranging from -1 to -4 dBm, depending on model. Housed in hermetically... Read More

Electronic Components & Devices

Voltage Variable Attenuators provide 60 dB attenuation.

July 29, 2016

Available in 6 models covering octave broadband frequencies from 400 MHz to 18 GHz, Voltage Variable Attenuators are suited for use with variable gain amplifiers, power level controls, and feed-forward amplifiers. PIN diode-based devices provide broadband flatness where output level can be adjusted continuously by varying analog voltage on input control line. With CW input power rated up to +23... Read More

Electronic Components & Devices

Waveguide Bends operate up to 90 GHz across 12 frequency bands.

July 22, 2016

Operating across C to W bands, waveguide bends do not degrade transmission signal in waveguide systems where signal is required to turn or bend 90°. E- and H-plane configurations are available constructed of gold-plated, oxygen-free hard copper, or painted copper alloy (depending on the model). Along with VSWR as low as 1.08:1, these 30 unique models come in sizes from WR-137 (5.85 GHz) to... Read More

Electronic Components & Devices

Waveguide Transitions operate up to 110 GHz across 14 bands.

July 14, 2016

Operating from 5.85–110 GHz across 14 frequency bands, Waveguide to Waveguide Transitions are used in high power wireless applications such as instrumentation, test benches, SATCOM, MILCOM, radar, and telecom where signal strength and integrity are critical. Units provide smooth transition between different waveguide sizes with VSWR as low as 1.08:1. Constructed of gold plated or painted brass,... Read More

Test & Measuring Instruments

Semi-Rigid Coax Test Probes operate to 6 GHz max.

June 17, 2016

Offered in 0.02, 0.034, and 0.047 in. dia and 3, 6, 9, and 12 in. lengths, semi-rigid test probes assist in testing microwave circuits. Soldering of outer conductor to signal ground and exposed center conductor to trace carrying signal of interest enables sampling measurement without separate subassembly circuit board or adding connector to circuit layout. Versions include straight-cut... Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems

Right Angle Test Cables are rated up to 27 GHz.

June 15, 2016

Featuring low-profile design, Right Angle Test Cables cover frequency range from DC–27 GHz for SMA versions and DC–18 GHz for Type-N and TNC terminated cables. Units are available in 0.086 in. and 0.141 in. diameter, double shielded coaxial design with VSWR of 1.25:1, isolation in excess of 90 dB, and operating temperature of -40 to +150°C. Smooth wall formed by braid over spiral ribbon... Read More

Communication Systems & Equipment, Test & Measuring Instruments

Development System evaluates high bandwidth data rates.

May 24, 2016

With PEM009-KIT 60 GHz Development System, designers can perform product development and experimentation of single and multi-carrier high bandwidth modulation covering 57–64 GHz in globally unlicensed ISM frequency spectrum. System incorporates Transmit (PEM001-MIM) and Receive (PEM002-MIM) WR-15 waveguide modules that utilize SiGe BiCMOS semiconductor technology. It supports I/Q and FSK/MSK... Read More

Communication Systems & Equipment, Electronic Components & Devices, Mounting & Attaching Products

Waveguide Twists operate from 18-110 GHz across 7 bands.

May 13, 2016

Available in sizes from WR-42 (18 GHz) to WR-10 (110 GHz) and suitable for waveguide systems requiring gradual turn in polarization and waveform, precision 45° and 90° waveguide twists prevent unwanted signal transmission distortion. Gold-plated brass construction offers electrical performance with VSWR as low as 1.02:1 and insertion loss as low as 0.2 dB. Square and circular UG-style... Read More

Other Company News from
Pasternack Enterprises