AMETEK Drexelbrook
Horsham, PA 19044
Point Level Switch offers SIL-certified overfill protection.
Safety IntelliPoint RF(TM) Switch, used in above-ground bulk storage tanks, meets American Petroleum Institute's 2350 Recommended Practice for overfill/spill protection. Specifically, it comes standard with SIL1 certification; SIL2 is optional, and SIL3 is possible with redundant switch. Integral software continuously monitors application for changes and maintains repeatable trip point on probe....
Read More »Transmitters provide radar-based level measurement.
Radar Series DR7000 and Time Domain Reflectometry Series DR7100 incorporate touch screen display with choice of tank illustration, bargraph, oscilloscope, signal, or reflectivity screen. Utilizing FMCW technology, Series DR7000 features 2 MHz bandwidth that allows units to determine true level in tank despite agitated surfaces and vessel obstructions. Series DR7100 uses electromagnetic wave...
Read More »Tuning Fork Switch offers high and low level indication.
Series TF-100 provides no-calibration solution to point level measurement of clean liquids and is available with relay, current, or PNP outputs. Made of 316 stainless steel, sensor is offered in standard and sanitary versions. When material level reaches predetermined point on sensing element, it causes change in status in electronic unit, resulting in output that can operate alarms,...
Read More »Level Transmitter offers continuous, ultrasonic performance.
Accurate to 0.15%, USonic(TM) Series provides repeatable level measurement of liquids. CPVC construction suits Class I, Div 1 environments with Intrinsically Safe or Explosion Proof installation requirements. Able to handle temperatures from -40 to +158Ã-
Read More »Safety Switch suits SIL1, SIL2, and SIL3 installations.
IntelliPoint SXRNT Series RF Admittance Point Level Switch offers Auto-Calibration feature that detects presence or absence of material for maintenance-free operation. In-line unit measures liquids, solids, and slurry materials as well as interface between any insulating and conductive liquid. Included software monitors changes in composition, dielectric, or conductivity and maintains repeatable...
Read More »Wireless Interface eliminates cable/conduit runs.
Wireless Interface Solution provides wireless transmitter/receiver set suited for use in harsh environments and Class 1 Division 2 areas. Utilizing 902-928 MHz ISM band spread spectrum frequency hopping technology, product delivers license-free, interference-free link between remote devices and control room. Transmitters are available in ac and dc power versions, while receiver is offered in dc...
Read More »Level Sensor self adjusts to media and environment.
Ultrasonic, loop-powered, 2-wire Uniscan provides 0.25% accuracy and .11 in. resolution. Four-digit LCD reads out in level and distance of flow rate. Unit is suitable for ranges up to 49 ft in liquids and 28 ft in solids. Intelliscan 4-wire, low voltage unit provides 0.25% accuracy and 0.04 in. resolution. Single instrument can be used to measure liquids, solids, granular, slurry, or open-channel...
Read More »Point Level Switch offers SIL-certified overfill protection.
Safety IntelliPoint RF(TM) Switch, used in above-ground bulk storage tanks, meets American Petroleum Institute's 2350 Recommended Practice for overfill/spill protection. Specifically, it comes standard with SIL1 certification; SIL2 is optional, and SIL3 is possible with redundant switch. Integral software continuously monitors application for changes and maintains repeatable trip point on probe....
Read More »Transmitters provide radar-based level measurement.
Radar Series DR7000 and Time Domain Reflectometry Series DR7100 incorporate touch screen display with choice of tank illustration, bargraph, oscilloscope, signal, or reflectivity screen. Utilizing FMCW technology, Series DR7000 features 2 MHz bandwidth that allows units to determine true level in tank despite agitated surfaces and vessel obstructions. Series DR7100 uses electromagnetic wave...
Read More »Tuning Fork Switch offers high and low level indication.
Series TF-100 provides no-calibration solution to point level measurement of clean liquids and is available with relay, current, or PNP outputs. Made of 316 stainless steel, sensor is offered in standard and sanitary versions. When material level reaches predetermined point on sensing element, it causes change in status in electronic unit, resulting in output that can operate alarms,...
Read More »Level Transmitter offers continuous, ultrasonic performance.
Accurate to 0.15%, USonic(TM) Series provides repeatable level measurement of liquids. CPVC construction suits Class I, Div 1 environments with Intrinsically Safe or Explosion Proof installation requirements. Able to handle temperatures from -40 to +158Ã-
Read More »Safety Switch suits SIL1, SIL2, and SIL3 installations.
IntelliPoint SXRNT Series RF Admittance Point Level Switch offers Auto-Calibration feature that detects presence or absence of material for maintenance-free operation. In-line unit measures liquids, solids, and slurry materials as well as interface between any insulating and conductive liquid. Included software monitors changes in composition, dielectric, or conductivity and maintains repeatable...
Read More »Wireless Interface eliminates cable/conduit runs.
Wireless Interface Solution provides wireless transmitter/receiver set suited for use in harsh environments and Class 1 Division 2 areas. Utilizing 902-928 MHz ISM band spread spectrum frequency hopping technology, product delivers license-free, interference-free link between remote devices and control room. Transmitters are available in ac and dc power versions, while receiver is offered in dc...
Read More »Level Sensor self adjusts to media and environment.
Ultrasonic, loop-powered, 2-wire Uniscan provides 0.25% accuracy and .11 in. resolution. Four-digit LCD reads out in level and distance of flow rate. Unit is suitable for ranges up to 49 ft in liquids and 28 ft in solids. Intelliscan 4-wire, low voltage unit provides 0.25% accuracy and 0.04 in. resolution. Single instrument can be used to measure liquids, solids, granular, slurry, or open-channel...
Read More »