New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Thermal Management Materials

Thermal Management Material optimizes performance of LEDs.

Designed to transfer heat generated by LED lamps, LTM6300-SP Thermal Interface Material helps minimize power use and maximize lifespan for light emitting diodes. Used mainly as screen printable paste, phase change material was designed for LED backlights used in flat panel displays, but packaging technology can also be implemented in LEDs used in wide range of industries, from automobiles to...

Read More »
National and Nuventix Introduce New Reference Design for LED Bulbs

National and Nuventix Introduce New Reference Design for LED Bulbs

Complete Electronic Drive and Thermal Management Design for LED Bulbs Speeds and Simplifies Replacement of Conventional Bulbs SANTA CLARA, Calif. and AUSTIN, Texas - May 5, 2009 - National Semiconductor Corp. (NYSE: NSM) and Nuventix, Inc. today unveiled a new electronic drive and thermal management reference design that simplifies development of high-brightness light-emitting diode (LED) bulb...

Read More »

Gel Material has thermal conductivity value of 3.8 W/mK.

Gelease(TM) material, formulated with some cross-linking, has strength to stay in place and does not pump out. Movement is minimized as material has some cohesive strength, but is still soft so it can absorb movement of surfaces caused by thermal coefficient of expansion differences of assembled parts and maintain integrity of thermal path. Gelease was designed for syringe dispensing or stencil...

Read More »

Henkel's Materials Innovations Honored at APEX

Market-leading electronic materials company, Henkel Corporation, continues to prove its commitment to developing inventive and process-enhancing materials technologies and last week this effort was recognized as the company received three prestigious awards during the APEX event in Las Vegas. In the underfills category, Henkel won both an NPI Award and a Vision Award for its cornerbond underfill...

Read More »

HP 5890 Replacement Thermal Conductivity Detectors

Bethlehem, PA - March 2008 -GOW-MAC-® Instrument Co. provides a replacement thermal conductivity detector (TCDs) for the HP 5890A or 5890 Series II gas chromatograph (GC). Each detector comes ready to install in an existing HP 5890 GC. The detector is made of stainless steel and comes with a single, rhenium-tungsten (WX) filament as standard (heaters and RTD not included). Corrosion resistant...

Read More »
Watlow Now Offers Custom Version of TLM-8 Thermal Limit Monitor

Watlow Now Offers Custom Version of TLM-8 Thermal Limit Monitor

Feb. 6, 2008 St. Louis, MO - Watlow, a leading designer and manufacturer of heaters, controllers and temperature sensors, is now offering a custom version of its TLM-8 thermal limit monitor. This new custom version supports applications that have a need for higher accuracy temperature limits or specific limit settings not otherwise available. This new version of the TLM-8 is a perfect fit for...

Read More »
IMS Introduces New B-Series Therma-Bridge, Thermal Management Device

IMS Introduces New B-Series Therma-Bridge, Thermal Management Device

For Release February 5, 2008 Portsmouth, Rhode Island, USA- International Manufacturing Services, Inc. (IMS) introduces the B-Series Therma-Bridge as a simple and cost effective thermal management device. The B-Series Therma-Bridge uses a thermally-conductive Aluminum Nitride chip with metalized terminals to transport heat from one location to another, thus enhancing overall board performance....

Read More »

Stablcor Enters into Licensing Agreement with TTM Technologies

Costa Mesa, CA - October 03, 2007 - Stablcor Incorporated, a leading provider of technologically advanced carbon composite laminates, today announced that it has entered into a licensing agreement with TTM Technologies, Inc. (Nasdaq:TTMI). Under the terms of the agreement Stablcor has licensed the use of its STABLCOR-® technology to Santa Ana, CA-based TTM. STABLCOR provides printed circuit...

Read More »

Stablcor Inc. Enters into New Licensing Agreement with UK-Based Stevenage Circuits Ltd.

Costa Mesa, CA - December 12, 2007 - Stablcor Incorporated, a leading provider of technologically advanced carbon composite laminates, today announced that it has signed a new licensing agreement with Stevenage Circuits Ltd., one of the largest independent PCB fabricators in the UK. Stevenage provides a high-performance product portfolio to companies in over 20 countries. Stevenage is the first...

Read More »

Nextreme Announces Breakthrough in Flip Chip Semiconductor Process Technology - The Thermal Copper Pillar Bump

Breakthrough represents a true paradigm shift in thermal and power management for the entire electronics industry Research Triangle Park, N.C. (October 9, 2007) - Nextreme, a manufacturer of micro-scale thermal and power management products for the electronics industry, has integrated cooling and power generation into the widely accepted copper pillar bumping process used in high-volume...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics