New Apex 2310UV2 and 2316UV2 Compounds are UV- and Fungus-resistant
Available with a Shore A hardness range from 60 to 80 and California Proposition 65-compliant grades. Forms strong bonds with rigid vinyl substrates, yielding durable seal components for building and construction applications. Also used for window and door seals and other indoor and outdoor applications.
Read More »
Teknor Presents Apex and Flexalloy PVC Elastomer Compounds That are Pre-Compliant with Global Standards
The Apex® and Flexalloy® PVC Elastomer Compounds are offered in ten series with Shore A hardness ranging from 50 to 90 and 40 to 80 respectively. The compounds are ETO-, gamma-, and E-beam-sterilized and come in high-clarity medical blue tint. The extrusion grade compounds are used in respiratory, blood transport and delivery, catheter, enteral feeding and tubing applications whereas the...
Read More »
New Teknor Apex and Flexalloy PVC Compounds Comply with Flame Test Requirements for Cable Trays
Teknor Apex’s new PVC jacket compounds meet UL-1277 and UL-13 flame test requirements for electrical power/control tray cables and power-limited circuit cables, respectively. The Apex® brand options include 70018 for use over polyethylene, 70020 for outdoor-rated jackets over crosslinked polyethylene, and P-5007, the most flame-retardant, for use in application wiring and tray cables for...
Read More »
Teknor Apex's Flexible PVC Compounds feature anti-fungal properties.
Apex® 2324A2 Series Compounds consist of eight compounds with Shore A hardness ranging from 55 to 90 and are UV protected. These compounds are in applications such as gaskets, flexible glazing, weather-stripping and door sweeps. Products are made without using ingredients listed under California Proposition 65.
Read More »
Corrosive/Ultrapure Fluid Heat Exchanger Coils - Choosing the Right Strategy
Check out this white paper to learn which heat exchanger types are the best for high temperature performance in chemically aggressive applications.
Read More »
Low-Gloss PVC Compounds for Automotive Window Encapsulation Closely Match Surface Finish of Nearby EPDM Components
OEM-Approved Apex® 1523-LG Compounds from Teknor Apex Retain PVC Cost Advantage over Elastomers, Are Scratch- and Mar-Resistant, and Facilitate Precise Color Matching PAWTUCKET, RI, U.S.A., February 15, 2018 - A newly developed series of flexible PVC injection molding compounds that have been used successfully in automotive window encapsulation exhibit substantially lower levels of surface...
Read More »Flat Sheet are available in cut-to-size.
Cut-To-Size Flat Sheet is offered alongside inventory of PVC and Polycarbonate Roofing and Siding Panels. UNITREX Polycarbonate Panels consist of heavy duty, corrugated building material for new or replacement siding and roofing applications. Exhibiting optimizedÂ- cracking and peeling protection, panels protect equipment from harsh weather conditions, pollution, harmful UV rays, and...
Read More »CPVC Compounds suit potable water applications.
Available in 3 grades for small- and large-diameter pipe and 2 grades for fittings, AquaGuard® CPVC Compounds have NSF 14 and 61 certifications for use with potable water. Products are suitable for single and multi-family residences, and have also received certification from ICC Evaluation Service, LLC for applications in building plenums and ducts. Offering alternative to copper and...
Read More »
Flexible PVC Compounds suit automotive water drainage tubing.
Used for automotive drain tubing, Apex® 1583 Series includes flexible PVC compound grades ranging in hardness from 60 Shore A to 50 Shore D. Products exhibit minimal property change upon extended heat aging and stay flexible at temperatures down to -30°C. In addition to custom colors, clear formulations are available.
Read More »Cellular PVC Sheet and Trim address thickness requirements.
AZEK® cellular pvc trim and mouldings include AZEK 1 Â-½ in. Sheet and five 2x Trim products – all measuring 1 ½ in. thick. While 4 x 8 ft sheet has true 48 in.+ width, nominal boards sizes are 2 x 4 in., 2 x 6 in., 2 x 8 in., 2 x 10 in., and 2 x 12 in. with 18 ft lengths. AZEK 2x products have consistent color, density,...
Read More »
At MD&M West, Teknor Apex Will Present the Industry's Broadest Range of Compounds for Medical Tubing
New Products to Be Featured Will Include Apex® Flexible PVC Compounds with non-DEHP Plasticizers, a Medalist® TPE for Solvent Bonding, and a Rigid PVC for Connectors PAWTUCKET, RI, U.S.A.,Â- – Reflecting its commitment to providing medical device manufacturers with multiple polymer alternatives, Teknor Apex Company has developed the industry’s broadest range of compounds for...
Read More »
Von Ruden's Driven Tools Are Built to Last
Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.
Read More »
