
New Low Flow Indicator with Maximum Operating Pressure of 6.9bar (100psi)
Provides visual indication of flow between 0.3 and 4 liters per minute. Available in brass or reinforced nylon materials in sizes 1/4”, 3/8” and ½” in NPT or BSPP. Suitable for use inside critical, restricted cooling paths such as injection mold cooling lines with bubblers or baffles.
Read More »
New Assistance for Injection Molding Success Service Eliminates Incorrect Design Principles
The Conventus Polymers’ Assistance for Injection Molding Success Service (AIMS) helps firearm product developers to maximize success for converting metal firearm components to injection molded engineering polymers. The service focuses on eliminating improper material selection. The Conventus provides material flow analysis and computer-aided engineering tools for firearm designers to help them...
Read More »
New Assistance for Injection Molding Success Service Eliminates Incorrect Design Principles
The Conventus Polymers’ Assistance for Injection Molding Success Service (AIMS) helps firearm product developers to maximize success for converting metal firearm components to injection molded engineering polymers. The service focuses on eliminating improper material selection. The Conventus provides material flow analysis and computer-aided engineering tools for firearm designers to help them...
Read More »
AMETEK SCP Introduces Polyethylene Molding Capabilities with Embedded Sensors and Payloads
AMETEK’s new polyethylene molding capabilities provide long life and high reliability for full depth rated sea floor applications. Polyethylene is preferred for molding due to its lower permeability to seawater. These capabilities are provided at the factory or in-the-field to mold polyethylene cable splices, breakouts and connector terminations.
Read More »
How to Choose a Servo Controller for Your Application
Choosing the best controller for your specific application is of the utmost importance. This white paper offers an overview of feature and motion profile considerations.
Read More »
AMETEK SCP Introduces Polyethylene Molding Capabilities with Embedded Sensors and Payloads
AMETEK’s new polyethylene molding capabilities provide long life and high reliability for full depth rated sea floor applications. Polyethylene is preferred for molding due to its lower permeability to seawater. These capabilities are provided at the factory or in-the-field to mold polyethylene cable splices, breakouts and connector terminations.
Read More »Husky to Demonstrate Range of Innovative PET Preform Molding Solutions at K 2016, Highlighting Revolutionary Multi - Layer Barrier Technology
BOLTON, Ontario – Husky Injection Molding Systems, a leading industrial technology provider to the plastics processing community, today announced that at K 2016 (Booth A61 in Hall 13) they will showcase their vast range of PET preform molding solutions, including a dedicated Experience Center highlighting their revolutionary Multi-Layer Barrier Technology. Introduced in 2015, the technology...
Read More »Husky to Demonstrate Range of Innovative PET Preform Molding Solutions at K 2016, Highlighting Revolutionary Multi - Layer Barrier Technology
BOLTON, Ontario – Husky Injection Molding Systems, a leading industrial technology provider to the plastics processing community, today announced that at K 2016 (Booth A61 in Hall 13) they will showcase their vast range of PET preform molding solutions, including a dedicated Experience Center highlighting their revolutionary Multi-Layer Barrier Technology. Introduced in 2015, the technology...
Read More »
SCF Delivery System supports large molding applications.
Designed for foaming of large injection molding applications >2,500–12,500 g, MuCell-® T-400 Series Super Critical Fluid Dosing and Delivery System is capable of delivering 50 g of nitrogen in 45 second cycle and is intended for molding machines with screw sizes greater than 90 mm. System produces gas on demand only, minimizing energy consumption and maximizing booster pump life. Equipped with...
Read More »
SCF Delivery System supports large molding applications.
Designed for foaming of large injection molding applications >2,500–12,500 g, MuCellÃ-® T-400 Series Super Critical Fluid Dosing and Delivery System is capable of delivering 50 g of nitrogen in 45 second cycle and is intended for molding machines with screw sizes greater than 90 mm. System produces gas on demand only, minimizing energy consumption and maximizing booster pump life. Equipped...
Read More »How Online Quoting Compressed Time for Plastic Injection Molding
As recently as a couple of years ago, it took engineers days or even weeks to obtain a quote for a custom plastic injection molding project. Today, the quotation processing time has been compressed to just a matter of hours. Through the Internet and some very complex, innovative online quotation systems, the automation of the quotation process has revolutionized the plastic injection molding...
Read More »
Simple Connection MGB with EtherNet/IP
The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.
Read More »