New Pinch Valves Products

Beswick Miniature Pinch Valves Are Now Available for 1/8 OD and ¼ OD Tubing

Beswick miniature pinch valves are now available for 1/8” OD and ¼” OD tubing. The PV series miniature pinch valve is designed to control fluid when it is advantageous to avoid fluid contact with mechanical components and elastomeric seals. Pinch valves achieve fluid control by clamping down on the outside diameter of the tubing in order to limit or stop flow. The PV has a port for...

Pinch Valves

New Miniature Pinch Valves wih Pneumatic Actuation Port and Manual Knurled Knob

Available for 1/8” OD and ¼” OD tubing. Designed to control fluid when it is advantageous to avoid fluid contact with mechanical components and elastomeric seals. Achieves fluid control by clamping down on the outside diameter of the tubing in order to limit or stop flow.

Pinch Valves

New ASCO Series 273 Pinch Valves with Open or Closed Valve Position Detection

Features a pinching mechanism that remains firmly in place to provide tube retention and eliminates breakage or damage to the soft tubing. Available with media pressure up to 6BAR and air operating pressure of 4.8 to 10 BAR. Ideal for bioreactor and fermentation tanks, tangential flow filters (TFF), chromatography skids and other drug discovery lab applications.

Pinch Valves

New Pinch Valves Measures 72.5mm in Length and 24mm in Diameter

Control any and all fluids that are compatible with the tubing material. Accuracy of operation makes them suitable for dosing. Ideal for control of water, air and other non-aggressive fluids across a wide range of industries.

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Pinch Valves

Clippard Miniature Pneumatic Pinch Valves

Cincinnati, Ohio – Clippard’s NPP Series 2-Way pneumatic pinch valves are air-piloted devices designed to open or close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts of fluid to remain in the valve. Pinch valves have no areas of dead volume where fluid can become trapped. Only the inside of the tubing has contact with...

Pinch Valves

NPV Series 3-Way Pinch Valves are operated through solenoid.

Available in four sizes with pressure range options of up to 30 psig, NPV Series 3-Way Pinch Valves are used in drug dispensing, laboratory equipment, waste water, medical devices, chemical, food and beverage equipment, bulk and solids handling. Offering unobstructed flow path, units have no dead volumes or areas where fluid is trapped. Capable of handling blood and particulate matter.

Pinch Valves

045 series manufactured in Class 8 clean rooms.

Applied in analytical and medical instruments, 045 series line of Pinch Valves transfers less heat for high protection of liquid media. Product uses low power for operation, gives high vacuum and pressure ratings, is compact in design and can be used with various tubing sizes. Available in ¾”, 1”, 1 ¼” and 1 ½” sizes and can be custom designed for specialized applications.

Pinch Valves

Sanitary Clamp Ball Valve meets FDA and USDA 3A requirements.

Available in -½–4 in. sizes, 30D Series 3-Way Diverter Valve is constructed of ASTM 316 stainless steel with sanitary tri-clamp end connections. Unit features full port design with highly polished I.D. and comes standard with live loaded stem seals and blowout proof stem. Direct ISO mounting for actuators eliminates need for brackets and couplers. Valve is suited for brewing, dairy, water...

Pinch Valves

Miniature Pinch Valves control flow of liquids and gases.

Available in- 4 sizes with multiple pressure range options to 30 psig, NPV Series opens and closes tubes for controlling flow of liquids and gases. Solenoid-operated valves have no areas or dead volume where fluid can become trapped. Each 2-way- valve comes with 12 in. of medical/laboratory grade silicone tubing pre-installed. Typical applications include drug dispensing, laboratory equipment,...

Pinch Valves

Solenoid Pinch Valves feature push-button tube changes.

Designed for use with 1.6, 0.8, and 1.0 mm ID tubing, Model PS Pinch Valves are available in 3-way dual tube configuration, which is simultaneously operated as normally open and normally closed, and either 2-way normally open or 2-way normally closed single tube configurations. Units are designed for continuous duty with max operating pressure of 14.51–21.77 psi. Measuring 49.3 x 20 mm, valves...

ISO-Certified Plastic Injection Molding from Rodon

The Rodon Group is a proven leader in high-volume, close tolerance injection molding. We offer globally competitive, innovative manufacturing solutions for a broad range of industries. Check out our video to learn more.