Network Analyzers (Electrical)

Network Analyzers (Electrical)

Diagnostic Tool monitors DeviceNet network continuosly.

BradCommunications(TM) eNetMeter(TM) DN monitors real-time network health, and sends information over Ethernet to PLC or PC monitoring system. Data can be read directly by EtherNet/IP master, or can be accessed through DLL interface or OPC server. By comparing acceptable base measurements of a good" network, it can be used to diagnose current faults on non-functioning network through measurement...

Read More »
Network Analyzers (Electrical)

USB Scope Adapter combines features of 7 devices.

Including 2-channel, 10-bit, 20 MS/sec, 2 MHz oscilloscope; 2-channel spectrum-analyzer; and 3 MHz 8-bit arbitrary-waveform/standard-function generator with 8 digital I/O lines, CircuitGear CGR-101(TM) also functions as network analyzer, noise generator and PWM output source. Oscilloscope, generator, and digital I/O are operated from custom open-source Tcl/Tk software, and device is also...

Read More »
Network Analyzers (Electrical)

Network/Spectrum Analyzer simplifies TV component testing.

Along with 9 kHz to 3 GHz frequency range, R&S ZVL3 75 features 75 ohm connectors for performing network and spectrum analysis. Multi-purpose instrument is suited for measuring tasks during development, production, installation, and maintenance of TV, CATV, or satellite TV components and systems. Displaying up to 100 traces and diagrams simultaneously, 2-port bidirectional analyzer enables...

Read More »
Network Analyzers (Electrical)

Analyzer measures signal degradation in optical networks.

Suited for operators upgrading networks to 10, 40, or 100 Gbps, FTB-5600 Distributed PMD Analyzer enables characterization of polarization mode dispersion (PMD), as a function of distance, in high-speed optical networks. It allows quantification of PMD accumulation per section, expressed as absolute contribution or overall percentage. On-screen simulation provides visual tool to analyze potential...

Read More »
Network Analyzers (Electrical)

Mobile Station Tester has GO/NO GO test capability.

Offered as standalone one-box test set for mobile device test, N9360A series mobile station tester is designed for test engineers and technicians for testing parametric and call processing performance of GSM/GPRS/E-GPRS, W-CDMA, HSDPA, cdma2000®, and 1xEV-DO mobile phones. Featuring automated test procedures and shielded DUT test enclosure, product is used for automated mobile test for UMTS...

Read More »
Network Analyzers (Electrical)

EXFO Expands Ethernet Test Capabilities of its Power Blazer Modules

o Industry's most integrated and feature-rich multi-service transport test solution now supports multi-stream QoS test capabilities QUEBEC CITY, CANADA, November 26, 2008 - EXFO Electro-Optical Engineering Inc. (NASDAQ: EXFO, TSX: EXF) announced today the addition of multi-stream test support on the FTB-8120NGE, FTB-8130NGE, IQS-8120NGE and IQS-8130NGE Power Blazer multi-service test modules....

Read More »
Signal Analyzer comes with 6.4 in. VGA color display.
Network Analyzers (Electrical)

Signal Analyzer comes with 6.4 in. VGA color display.

Featuring 806 MHz Xscale processor, Microlog Analyzer AX provides capabilities of 4-channel non-route/2-channel or simultaneous triaxial route analysis and 2-channel balancing. Rugged IP65 rated dust- and water-proof design suits tough industrial environments, while rechargeable lithium battery supports 8 hr of continuous data collection. Custom device can be created using range of application...

Read More »
Network Analyzers (Electrical)

Network Analyzer operates on I²C protocol interfaces.

Suited for all IÂ-²C bus system development and debug, I²CXpress(TM) operates on standard I²C protocol interfaces in low-speed (10 kbps), standard (100 kbps), and fast (400 kbps) modes. It is provided with 8PI Control Panel software, with visual PC interface to interact with embedded I²C systems, while 8PI Control Panel is supplied with TCL/tk scripting environment,...

Read More »
Network Analyzers (Electrical)

Cable Modem Network Analyzer does not require external PC.

Able to provide 6 and 8 MHz IF signal testing on common network, CM2000E(TM) is designed to verify, test, and troubleshoot DOCSIS® and Euro DOCSIS 2.0 network performance by analyzing analog and digital video, high speed data (HSD) cable modems, and VoIP traffic on network. Customizable verification and troubleshooting capabilities are combined with pre-defined automated test suites, VGA...

Read More »
Network Analyzers (Electrical)

Handheld Visible Fault Locator detects fiber fault positions.

Visible red laser diode fault locator, GAO 811 is designed to find faults in fiber jumpers, patch panels, enclosures, connectors and couplers. Fault location is made visible from macro bend point, break, problem coupler or connector, or mechanical splice that is not well aligned. With low voltage warning, and automatic power off, unit suits application in optical network installation and...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers