Multipliers

Pasternack to Exhibit at the 2017 IEEE MTT-S International Microwave Symposium in Honolulu

Pasternack to Exhibit at the 2017 IEEE MTT-S International Microwave Symposium in Honolulu

Pasternack Engineers Will be at Booth #514 on June 4th-9th in the Hawaii Convention Center IRVINE, Calif. - Pasternack, a leading provider of RF, microwave and millimeter wave products, has announced that they will be exhibiting at this year’s IEEE International Microwave Symposium (IMS 2017) in Honolulu, Hawaii from June 4th to June 9th at the Hawaii Convention Center. This year at IMS 2017,...

Read More »
PE88X-Series Active Frequency Multipliers doubles input frequency.

PE88X-Series Active Frequency Multipliers doubles input frequency.

Eliminating need for external LO buffer amplifier stage and additional circuitry, active frequency multipliers require single +5 V DC supply. Producing output power level up to +17 dBm, unit offers DC blocked input/output RF ports. Utilizing efficient GaAs PHEMT semiconductor technology, device offers output frequencies from 8 GHz to 46 GHz and input frequencies from 4 GHz to 23 GHz. Applications...

Read More »
GaAs MMIC Frequency Multipliers span 8-40 GHz.

GaAs MMIC Frequency Multipliers span 8-40 GHz.

Available in die form, Model CMD213- broadband x2 active frequency multiplier covers input frequency range of 8–15 GHz. When driven by +17 dBm signal, device provides +17 dBm output power from 30–40 GHz. Also supplied in die form, Models CMD226 and CMD227 are broadband x2 passive frequency multipliers with input frequency ranges of 7–11 GHz and 8–15 GHz, respectively. Typical...

Read More »
Advanced GaN and GaAs MMICs Unveiled by Custom MMIC at IMS 2015

Advanced GaN and GaAs MMICs Unveiled by Custom MMIC at IMS 2015

Westford, MA –- Custom MMIC, (www.CustomMMIC.com), a developer of performance-driven monolithic microwave integrated circuits (MMICs), will be debuting several new GaAs and GaN MMIC amplifiers, switches, and multipliers at the 2015 International Microwave Symposium (IMS) in Phoenix, Arizona, being held from May 19 through May 21. Their latest products include two GaAs LNAs, the CMD228P4 and...

Read More »
Active x2 Frequency Multiplier offers high output, low spur levels.

Active x2 Frequency Multiplier offers high output, low spur levels.

Supplied in die form, CMD214 accepts 12–18 GHz input signals and provides output to second harmonic (24–36 GHz) at +17 dBm. Isolations to the fundamental and third harmonics are greater than 32 dBc and 25 dBc, respectively. Typical input drive level is +14 dBm, although multiplier will operate at levels as low as +11 dBm, and bias conditions are Vdd=5 V @ 40 mA, Vgg1 = -1.8 V, and Vgg2 = -0.8...

Read More »

Microsemi Strengthens Its Timing Products Leadership with New Any-to-any Frequency Clock Multiplier and Jitter Attenuator Clock Management Products

Delivering Industry-leading 250fs Jitter in an Ultra-small 5x5 mm Footprint, Devices are Ideal for a Variety of Communications Applications ALISO VIEJO, Calif.- – Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced its new ZL30252 and ZL30253 any-to-any frequency clock multiplier and...

Read More »

Agilent Technologies' 3-D EM Simulation Software Selected by Millitech for Mixer, Multiplier and Passive Device Development

SANTA CLARA, Calif. – Agilent Technologies Inc. (NYSE: A) today announced that Millitech Inc., a leading provider in millimeter-wave components, assemblies and subsystems for applications in satellite communications, radiometry, radar and remote sensing, has selected Agilent's Electromagnetic Professional (EMPro) and Advanced Design System (ADS) software for use in developing mixers,...

Read More »

Live Tool Speed Multipliers are offered in 24,000 rpm styles.

Available in 24,000 rpm max styles for live tool lathes, 1:4 live tool speed multipliers are provided as axial or radial drilling and milling heads with either external or internal coolant design. Mounting configurations accommodate any machine tool turret set-up, including all VDI and BMT sizes.

Read More »
Port Multiplier connects 5 eSATA storage devices to computer.

Port Multiplier connects 5 eSATA storage devices to computer.

Featuring heavy gauge metal housing with ventilation, Port Multiplier Ultra connects up to 5 eSATA storage devices to computer via single eSATA or USB 3.0 port. Five external hard drives attached to unit can be configured as RAID 0/1/5/10, combined as one large volume, or appear as 5 individual drives. Users can also connect 5 SATA optical drives, such as DVD-RRW or Blu-ray drives, and do...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics