Miscellaneous Switches

Crosspoint Switches ensure low noise and low jitter.
Miscellaneous Switches

Crosspoint Switches ensure low noise and low jitter.

Models SN65LVCP22 and SN65LVP23 are 2 x 2 crosspoint switches that provide 2:2 buffering, 1:2 splitting, and 2:1 multiplexing. Model SN65LVCP22 supports LVPECL/CML to LVDS level translations, while Model SN65LVCP23 supports LVDS/CML to LVPECL level translations. Both feature 50 ps peak-to-peak jitter, 1.7 ns switch time, and operating temperature of -40 to +85°C. They meet redundant serial...

Read More »
Vibration Monitor is CSA certified.
Miscellaneous Switches

Vibration Monitor is CSA certified.

Enclosed in water-tight, industrial-type housing, Model 550-CSA Vibration Switch monitors rotating machinery operating at 120-60,000 rpm for excessive vibration caused by unbalance, worn bearings, mechanical looseness, and broken parts. Product features 2 adjustable vibration limits with time delays, limit LED indicators, system test button, and automatic limit resets.

Read More »
Switch Modules track/store number of relay cycles in system.
Miscellaneous Switches

Switch Modules track/store number of relay cycles in system.

Models NI PXI-2593 and NI SCXI-1193 RF switch modules offer 16 channels in PXI and 32 channels in SCXI, 500 MHz bandwidth, 50 ohm characteristic impedance, 10 W RF carry power, 150 V CAT I switching, and MCX direct connectivity. Models NI PXI-2566 and NI SCXI-1166 general-purpose switch modules offer 16 independent SPDT relays in PXI and 32 in SCXI. Modules also feature switching capacity of 2 A...

Read More »
Current Switches are self-powered.
Miscellaneous Switches

Current Switches are self-powered.

CS Series switches combine current transformer, signal conditioner, and limit alarm into one package. Units offer selectable current input range, universal solid-state outputs, and LED indication for local display of switch status. Products are available in split core or solid core case.

Read More »
Switch Modules integrate with virtual instrumentation products.
Miscellaneous Switches

Switch Modules integrate with virtual instrumentation products.

Models PXI-2593 and SCXI-1193 are RF switch modules with 16 channels in PXI and 32 channels in SCXI. Using NI-SWITCH instrument driver software, design and test engineers can configure modules as unterminated multiplexer, terminated multiplexer, or dimensionally flexible sparse matrix. Models PXI-2566 and SCXI-1166 offer independent, high-current, SPDT relays with 16 relays in PXI and 32 relays...

Read More »
Matrix provides RS-232C and IEEE-4888 interfaces.
Miscellaneous Switches

Matrix provides RS-232C and IEEE-4888 interfaces.

Model 13761 bi-directional-random addressable matrix features front panel keypad control, LCD display, crosspoint verification, and redundant, pluggable power supply system. RS-422 unit features 8 x 10 x 16 balanced pair configuration, frequency response of DC-10 MHz, and I/O impedance of 100 ohms nominal. IRIG matrix provides 8 x 10 coaxial configuration, frequency response greater than 10 MHz,...

Read More »
Flow Switch suits flow/no-flow applications.
Miscellaneous Switches

Flow Switch suits flow/no-flow applications.

Series P4 Shuttle Flow Switch monitors water-based liquids with fixed set points from 0.1-1.5 gpm. It features Ryton R4 housing and piston, 316 SS spring, and Viton® O-ring. User can choose from normally open or normally closed SPST or SPDT hermetically-sealed reed switch technology. Inlet and outlet ports are 9/16 in.-18 UNF-2B thread with optional 1/8 in. and Â-¼ in. NPT or ½...

Read More »
Analog Switch preserves signal integrity.
Miscellaneous Switches

Analog Switch preserves signal integrity.

Model FSAT66, low-voltage, SPST analog switch uses TTL-level control circuitry so designers can route higher voltage signals with lower voltage control levels. Normally Open MicroPak(TM) package is 1.45 mmÂ-², and is smallest form factor with this function available. Unit offers minimal THD of 0.011% and is suitable for use in audio applications, mobile phones, digital cameras, and other...

Read More »
Adjustable Flow Switches suit water, oil, or gas, applications.
Miscellaneous Switches

Adjustable Flow Switches suit water, oil, or gas, applications.

Explosion proof Series AFS, offered in brass or 316 stainless steel, offers infinite number of flow settings at pressures up to 1,000 psig. Switches are field adjustable using flat blade screwdriver, and adjustment is set-screw-locked for tamper-free operation. Each unit has SPDT switch rated at 20 VA, 24 in. 18 AWG polymeric lead wires or conduit electrical connection, and Â-½ in. female...

Read More »
Polypropylene Flow Switch fits most piping requirements.
Miscellaneous Switches

Polypropylene Flow Switch fits most piping requirements.

Series P3 incorporates piston design consisting of hermetically sealed SPST NO reed switch. Inlet and outlet port can be 3/8 in. male NPT or Â-¼ in. male Quick Disconnect. Quick Disconnect acetal adapter is user selectable for straight through flow or with shut off valve. Shut off valve will stop line flow when adapter is removed from switch, and flow will resume when adapter is reconnected.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers