Material Processing Mills

Industrial Hammer Mill from Schutte-Buffalo Hammermill Processes a Variety of Abrasive Materials
Material Processing Mills

Industrial Hammer Mill from Schutte-Buffalo Hammermill Processes a Variety of Abrasive Materials

The WA Series from Schutte-Buffalo Hammermill is a conventional top feed, gravity discharge industrial hammer mill suitable for reducing a wide variety of abrasive or hard to process materials such as: stone and aggregates, chemicals, friable metals, metal powders, fish and bone meal and more. The WA Series is available in more than twenty sizes with internal widths ranging from 6" to 60" and...

Read More »
Wood Grinder with Integral Fan
Material Processing Mills

Wood Grinder with Integral Fan

Wood grinder with integral fan produces exact required finished particle size, then conveys material to storage The medium production 13 Series Finish Grinding Wood Hammer Mill from Schutte-Buffalo Hammermill is available in four standard models with infeed sizes ranging from 13" to 36". Each model features a built-in material handling fan mounted on the main mill shaft. A fifth 48"model is also...

Read More »
Industrial Bark Grinder
Material Processing Mills

Industrial Bark Grinder

Industrial Bark Grinder provides high production processing of bark and other heavy, fibrous wood materials. The Industrial Bark Grinder Series from Schutte-Buffalo Hammermill is ruggedly constructed to accommodate high production grinding of bark and other heavy, fibrous wood materials including: green wood waste, pole peelings and sawmill scrap. Available in six standard sizes with infeed...

Read More »
Attritor DAQ Package enables in-depth condition monitoring.
Material Processing Mills

Attritor DAQ Package enables in-depth condition monitoring.

Consisting of expansion board, crossover cable, and software, data acquisition (DAQ) package interfaces with Baldor VS1SP variable frequency drive found standard on most Union Process Attritors. It provides real-time data for monitoring conditions in mill as well as improving QC and providing method to perform test comparisons. With this package, users can monitor 8 additional parameters to...

Read More »
Portable Hammer Mill offers scalable results.
Material Processing Mills

Portable Hammer Mill offers scalable results.

Suitable for small production, batch or pilot projects, gravity discharge Laboratory Scale Hammer Mill is capable of processing variety of materials to granular or powder consistency with scalable results. Mill is available in 2 standard sizes with 6 or 8 in. infeed widths. Both models have option of replaceable internal wear plates for processing abrasive materials, and choice of carbon or...

Read More »
MPE Announces Limestone Sizing for Fluidized Bed Boilers
Material Processing Mills

MPE Announces Limestone Sizing for Fluidized Bed Boilers

In coal desulfurization processes, when limestone is added to fluidized bed boilers, it absorbs sulfur pollutants (sulfur dioxide) and reacts with the sulfur to produce harmless calcium sulfate. For this reason, coal can and will continue to be used as a fuel source in the future. Additionally, with increased environmental focus on stack emissions and green production methods, it is critical that...

Read More »
Wet Mill has high-shear design.
Material Processing Mills

Wet Mill has high-shear design.

Employing rotor-stator suspension milling technology, high shear Ytron HV-Wet Mill is available in 3 different models ranging from 25-125 hp with capacities up to 150 gpm. Energy optimized tooling operates at tip speeds up to 70 m/sec with low power consumption, while sanitary high-speed mechanical seal eliminates potential trap areas around rotor shaft, optimizing clean-in-lace results. Options...

Read More »
Homogenization Tester evaluates in-line process feasibility.
Material Processing Mills

Homogenization Tester evaluates in-line process feasibility.

Suited for manufacturers of dispersions, emulsions, and slurries, Sanitary Homogenization Test Laboratory evaluates particle size reduction and de-agglomeration manufacturing processes. System utilizes dynamic in-line mixer or high shear colloid mill featuring rotor-stator mixing technology that exposes 100% of product to same shear action, with no bypass. Comprehensive test report with...

Read More »
Sanitary Colloid Mills; Flow-Thru Design Assures Consistency
Material Processing Mills

Sanitary Colloid Mills; Flow-Thru Design Assures Consistency

Sanitary wet-mixing colloid mills that process all particles through a single mixing head for precise size reduction, consistency and repeatability are available from Bematek Systems, Inc. of Salem, Massachusetts. Bematek Z-Series Colloid Mills feature 316L stainless steel construction and a milling head that processes all particles through a rotor and stator; exposing them to the same shear...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers