Frequency Synthesizers

PLL/Synthesizer operates from 1,800-1,860 MHz.
Electronic Components & Devices

PLL/Synthesizer operates from 1,800-1,860 MHz.

Housed in 0.582 x 0.8 x 0.15 in. SMD package, Model CPLL58-1800-1860 only requires external frequency reference and supply voltages for internal phase lock loop and voltage controlled oscillator. Typical phase noise is -103 dBc/Hz at 10 kHz offset with minimum output power of 3 dBm. VCO voltage is 5 Vdc and PLL voltage is 3 Vdc. Programmed using standard 3-line interface, device is suited for...

Read More »
Electrical Equipment & Systems

RFICs are rated to handle demanding applications.

Operating up to 4.4 GHz, ADF4150 PLL synthesizer is capable of Fractional-N or Integer-N operation and has -222 dBc/Hz phase-noise figure. Model ADL5601/ADL5602 broadband RF/IF gain blocks, operating from 50 MHz to 4 GHz, integrate internal bias circuitry and are fully ESD protected. With 400-2,700 MHz operating frequency range, ADL5604 broadband 1 W driver amp consumes 325 mA current. As...

Read More »
PLL Synthesizer combines VCO and PLL in one compact package.
Electronic Components & Devices

PLL Synthesizer combines VCO and PLL in one compact package.

Operating from 2,416-2,553 MHz with typical step size of 100 kHz, CPLL66-2416-2553 is housed in compact 0.6 x 0.6 x 0.15 in. SMD package. It needs only external frequency reference and supply voltages for internal PLL and VCO and is programmed using standard 3 line interface (data, clock, and load enable). Phase noise is -90 dBc/Hz at 10 kHz offset with minimum output power of 3 dBm, VCO voltage...

Read More »
PLL Synthesizer comes in 0.6 x 0.6 x 0.15 in. SMD package.
Electronic Components & Devices

PLL Synthesizer comes in 0.6 x 0.6 x 0.15 in. SMD package.

Featuring VCO wrapped around PLL in single package, CPLL66-1600-2200 operates from 1,600-2,200 MHz with typical step size of 1,000 kHz. It requires only external frequency reference and supply voltages for internal PLL and VCO, and is programmed using standard 3 line interface. Features include typical phase noise of -6 dBc/Hz at 10 kHz offset with minimum output power of +7 dBm, second harmonic...

Read More »
Managing the New FGD Wastewater Regulations
Sponsored

Managing the New FGD Wastewater Regulations

EPA Steam Electric Power Generating Effluent Limitations Guidelines, or ELG’s, impact coal-fired power plant operations and their wastewater management. Specifically, the ELG’s impose limits for suspended solids, arsenic, mercury, selenium, and nitrate/nitrite for Flue Gas Desulfurization (FGD) wastewater. These regulations drive the need for technology based solutions that address and adapt to variables such as the nature of wastewater streams, types of contaminants, contaminant loading, and costs. In this guide you will learn about the best available technologies for complying with the new standards. One of the leading contenders in this process is the Fluidized Bed Reactor or FBR, which removes soluble selenium and other metals from FGD wastewater. Advantages of fluidized bed reactors include optimum microorganism efficiency, smaller overall footprint, steady-state operation, lower hydraulic residence times, system robustness, and lower costs. Download this guide for additional information on FBR technology for treating FGD wastewater, including pilot studies and tests, and polishing selenium removal options.

Read More »
Electrical Equipment & Systems

Frequency Synthesizer has low-noise design.

Offered in series of 6 devices covering 31.6-4,000 MHz range, PowerWise® LMX2541 comes in 6 x 6 mm, 36-pin LLP® and provides less than 2 mrad rms noise at 2.1 GHz (3.5 mrad rms noise at 3.5 GHz). Device, which can be operated with up to 104 MHz of phase-detector rate in integer and fractional modes, integrates delta-sigma fractional-N PLL, VCO, divider, and output driver. Areas of use include...

Read More »
Fixed Frequency Synthesizer features low phase noise.
Electronic Components & Devices

Fixed Frequency Synthesizer features low phase noise.

Operating at 2,200 MHz, Model SFS2200C-LF features typical phase noise of -109 dBc/Hz at 10 kHz offset and typical sideband spurs of -70 dBc. Unit delivers output power of 6 dBm with VCO voltage supply of 5 Vdc while drawing 30 mA and phased locked loop voltage of 3 Vdc while drawing 11 mA over temperature range of -40 to 85°C. Housed in PLL-V12C package measuring 0.60 x 0.60 x 0.22 in., device...

Read More »
Fixed Frequency Synthesizer operates at 2,400 MHz.
Electronic Components & Devices

Fixed Frequency Synthesizer operates at 2,400 MHz.

Measuring 0.60 x 0.60 x 0.22 in., Model SFS2400C-LF features typical phase noise of -109 dBc/Hz at 10 kHz offset and typical sideband spurs of -70 dBc. Unit delivers output power of 6 dBm with VCO voltage supply of 5 Vdc while drawing 30 mA, and phased locked loop voltage of 3 Vdc while drawing 11 mA over temperature range of -40 to 85°C. Suited for satellite communication and fixed wireless...

Read More »
Fixed Frequency Synthesizer features low phase noise.
Electronic Components & Devices

Fixed Frequency Synthesizer features low phase noise.

Operating in C-band at 4,500 MHz, SFS4500A-LF features typical phase noise of -84 dBc/Hz @ 10 kHz offset and a typical sideband spurs of -65 dBc. RoHS-compliant product delivers typical output power of 2.5 dBm, with VCO voltage supply of 5 Vdc, while drawing 33 mA (typ) and phase locked loop voltage of 3 Vdc while drawing 15 mA (typ) over -20 to +80°C range. Typical 2nd harmonic suppression is...

Read More »
Multi Channel Synthesizers provide phase adjustable output.
Electronic Components & Devices

Multi Channel Synthesizers provide phase adjustable output.

Accommodating up to 16 channels and programmable to any frequency between 2-60 MHz, VF Series modules provide phase adjustable output to avoid destructive arcing and cross-talk in multiple cathode plasma processing chambers. Phase of each channel can be adjusted to accuracy greater than 0.1° resolution. Allowing adjustment for cable length dependencies, modules are designed for solar thin film...

Read More »
Fixed Frequency Synthesizer feaures low phase noise.
Electronic Components & Devices

Fixed Frequency Synthesizer feaures low phase noise.

Model SFS1920A-LF operates at 1,920 MHz and offers typical phase noise of -98 dBc/Hz at 10 kHz offset and typical sideband spurs of -75 dBc. Delivering typical output power of 0 dBm with VCO voltage supply of 5 Vdc, it draws 24 mA and phase locked loop voltage of 3 Vdc while drawing 9 mA over -40º to +85ºC. Typical 2nd harmonic suppression is -20 dBc. Unit is contained in standard PLL-V12N...

Read More »
Tekna Manufacturing LLC Announces Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industrys premier HBOT system. To learn more, see our video.

Read More »

All Topics