Frequency Synthesizers

Direct Digital Synthesizer offers frequency control via USB.
Electronic Components & Devices

Direct Digital Synthesizer offers frequency control via USB.

Providing USB control of frequency generation to 10 MHz with resolution of 0.28 Hz, JSB611 series USB 2.0 Direct Digital Synthesizer Modules have sine wave output amplitude of 500 mV peak-to-peak with signal-to-noise ratio of 60 dB. Total harmonic distortion is -66 dBc with spurious free dynamic range of -60 dBc, while triangle wave output amplitude is 500 mV peak-to-peak. Modules also include...

Read More »
Fixed Frequency Synthesizer operates at 10 GHz.
Electronic Components & Devices

Fixed Frequency Synthesizer operates at 10 GHz.

Operating in X-band, Model SFS10000C-LF features typical phase noise of -100 dBc/Hz at 10 kHz offset and typical sideband spurs of -70 dBc. Unit delivers output power of 0 dBm with VCO voltage supply of 5 Vdc while drawing 90 mA and phase locked loop voltage of 3 Vdc while drawing 11 mA over temperature range of -40 to 85°C. Housed in SFS-L1 package measuring 1 x 1 x 0.22 in., RoHS-compliant...

Read More »
Multi-Frequency Clock Synthesizer offers system flexibility.
Electronic Components & Devices

Multi-Frequency Clock Synthesizer offers system flexibility.

Model 7191 gives designers working with A/Ds and D/As precise clock source with custom frequency generation under software control. Programmable clock synthesizer PMC module uses low-noise VCXOs followed by clock synchronizer. It generates 4 different user-programmable VCXO frequencies plus 4 divided versions (by 2, 4, 8, and 16) of each oscillator. Using provided software, users can route up to...

Read More »
Fixed Frequency Synthesizer in C-Band operates at 6,400 MHz.
Electronic Components & Devices

Fixed Frequency Synthesizer in C-Band operates at 6,400 MHz.

Model SFS6400A-LF features typical phase noise of -88 dBc/Hz at 10 KHz offset and typical sideband spurs of -65 dBc. Delivering output power of 6 dBm with VCO voltage supply of 5 Vdc while drawing 40 mA, RoHS-compliant product also offers phase locked loop voltage of 3 Vdc while drawing 11 mA over -40 to +85ºC temperature range. Synthesizer also features 2nd harmonic suppression of -20 dBc. Unit...

Read More »
Deploying Commercial Electronics in Rugged Environments
Sponsored

Deploying Commercial Electronics in Rugged Environments

When it comes to defense, all operations require a high degree of coordination and processing. As a result, airborne intelligence, surveillance and reconnaissance (ISR) has become a crucial component of military activity. In order to maintain stealth and avoid detection, ISR missions are forced to fly at extremely high altitudes. These altitudes present a number of environmental obstacles such as extreme temperature ranges or fluctuating atmospheric pressure – most of which cannot normally be handled by commercially available components. However, because of rising costs and time delays, developing application-specific hardware is becoming less feasible. Using a real-life case study, this white paper explores in great detail a scenario in which Commercial Off-the-Shelf (COTS) components were able to be used for a critical, extreme environment application. Check out this report, and see if cost-saving commercial COTS components can possibly be utilized for your specific needs.

Read More »
S-Band Fixed Frequency Synthesizer features low phase noise.
Electronic Components & Devices

S-Band Fixed Frequency Synthesizer features low phase noise.

Operating at 3,900 MHz, model SFS3900A-LF has typical phase noise of -88 dBc/Hz @ 10 kHz offset and typical sideband spurs of -65 dBc. RoHS-compliant product delivers typical output power of 3 dBm with VCO voltage supply of 5 Vdc while drawing 33 mA (typ) and PLL voltage of 3 Vdc while drawing 15 mA (typ) over -40 to 85°C range. Supplied in 0.60 x 0.60 x 0.13 in. PLL-V12N package, synthesizer...

Read More »
Electrical Equipment & Systems

PLL Synthesizer with Charge Pump suits radio applications.

Supplied in 32-LFCSP, ADF4150HV 4.4 GHz fractional-N or integer-N PLL synthesizer features charge pump capable of 30 V drive level. Product can be used to directly drive high tuning-voltage external VCOs, removing need for active loop filters and subsequently simplifying system design. Operating from 3-3.6 V supply, IC incorporates on-chip frequency dividers that enable VCO frequency to be...

Read More »
Fixed Frequency Synthesizer features low phase noise.
Electrical Equipment & Systems

Fixed Frequency Synthesizer features low phase noise.

Operating at 1,770 MHz, Model SFS1770A-LF features typical phase noise of -95 dBc/Hz at 10 kHz offset and typical sideband spurs of -70 dBc. Unit delivers output power of 6 dBm with VCO supply of 5 Vdc while drawing 35 mA, and phase locked loop voltage of 3 Vdc while drawing 9 mA over temperature range of -40 to 85°C. Housed in PLL-V12N package measuring 0.60 x 0.60 x 0.13 in., RoHS-compliant...

Read More »
Fixed Frequency Synthesizer operates at 2,030 MHz.
Electrical Equipment & Systems

Fixed Frequency Synthesizer operates at 2,030 MHz.

Suited for fixed wireless and microwave radio applications, Model SFS2030A-LF features typical phase noise of -95 dBc/Hz at 10 kHz offset and typical sideband spurs of -70 dBc. Unit delivers output power of 6 dBm with VCO supply of 5 Vdc while drawing 35 mA, and phase locked loop voltage of 3 Vdc while drawing 9 mA over temperature range of -40 to 85°C. Housed in PLL-V12N package measuring 0.60...

Read More »
L-Band Fixed Frequency Synthesizer features low phase noise.
Electronic Components & Devices

L-Band Fixed Frequency Synthesizer features low phase noise.

Operating at 1,730 MHz, SFS1730A-LF features typical phase noise of -95 dBc/Hz @ 10 kHz offset and typical sideband spurs of -70 dBc. RoHS-compliant product delivers typical output power of 6 dBm with VCO voltage supply of 5 Vdc while drawing 35 mA (typ) and phase locked loop (PLL) voltage of 3 Vdc while drawing 9 mA (typ) over -40 to +85°C range. Typical second harmonic suppression is -15 dBc,...

Read More »
Fixed Frequency Synthesizer operates in L-band.
Electronic Components & Devices

Fixed Frequency Synthesizer operates in L-band.

Operating at 1,980 MHz, Model SFS1980A-LF features typical phase noise of -95 dBc/Hz at 10 kHz offset and typical sideband spurs of -70 dBc. Unit delivers output power of 6 dBm with VCO voltage supply of 5 Vdc while drawing 35 mA, and phase locked loop voltage of 3 Vdc while drawing 10 mA over temperature range of -40 to 85°C. Housed in PLL-V12N package measuring 0.60 x 0.60 x 0.13 in.,...

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customers mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our UPS as a service is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics