Frequency Synthesizers

X-Band Fixed Frequency Synthesizer offers ultra low phase noise.
Electronic Components & Devices

X-Band Fixed Frequency Synthesizer offers ultra low phase noise.

Operating at 11.8 GHz with 10 MHz reference, RoHS-compliant SFS11800C-LF features typical phase noise of -90 dBc/Hz and -120 dBc/Hz at respective offsets of 10 and 100 kHz. Single frequency synthesizer delivers typ output power of 3 dBm with VCO voltage supply of 5 Vdc while drawing 90 mA typ and PLL voltage of 3 Vdc while drawing 11 mA typ. Typ 2nd harmonic suppression is -30 dBc,...

Read More »
Fixed Frequency Synthesizer features ultra low phase noise.
Electronic Components & Devices

Fixed Frequency Synthesizer features ultra low phase noise.

Operating at 10 GHz, Model SFS10000C-LF features typical phase noise of -100 dBc/Hz at 10 KHz offset and typical sideband spurs of -70 dBc. RoHS-compliant unit delivers output power of 0 dBm with VCO voltage supply of 5 Vdc while drawing 90 mA and phased lock loop voltage of 3 Vdc while drawing 11 mA over temperature range of -40 to 85°C. Housed in SFS-L1 package measuring 1 x 1 x 0.22 in.,...

Read More »
Cleaning Products & Equipment

High-Speed Clock Generator is offered in PMC/XMC form factor.

Delivering clock frequencies up to 2 GHz, Model 7194 provides fixed frequency sample clocks to up to 4 analog-to-digital Cobalt® and Onyx® modules in multi-board systems. Generator enables synchronous sampling, playback, and timing for range of multichannel, high-speed data acquisition and software radio applications. Using PMC P14 or XMC P15 connectors solely for power, product can be...

Read More »
Designing and Specifying the Right Loudspeaker System for Emergency Mass Notification in Public Venues
Sponsored

Designing and Specifying the Right Loudspeaker System for Emergency Mass Notification in Public Venues

For every industry, there is nothing more crucial than having effective strategies for dealing with emergency situations. These are events you never hope for, but want the assurance of having the right solutions implemented when time is of the essence. Loudspeaker system optimization is essential when ensuring that communication is not lost when it is most needed. In this guide, you will learn about what key points to keep in mind when designing a loudspeaker system for your campus. This includes performing an on-site sound survey, selecting the right equipment for your applications, complementing your system with the right technology solutions, creating pre-assigned messages for different emergency situations, and having system accessibility no matter the circumstances. Download this guide for additional information on these public safety measures.

Read More »
Electrical Equipment & Systems

Wideband Frequency Synthesizer offers low phase noise.

Supplied in 32-pin, 5 x 5 mm QFN package, LMX2581 integrates multi-core VCO that allows output frequencies from 50–3,760 MHz and also gives designers option to bypass internal multi-core VCO in favor of external VCO. Phase detector frequency of 200 MHz and PLL normalized phase noise of -229 dBc/Hz provides precision local oscillator to RF front end for optimal receiver sensitivity. Also...

Read More »
Fixed Frequency Synthesizer features low phase noise.
Electrical Equipment & Systems

Fixed Frequency Synthesizer features low phase noise.

Intended for indoor basestations, model SFS0924C-LF is phase locked at 924 MHz while using 10 MHz reference and operates over -25 to +90°C range. This coaxial resonator PLL features phase noise of -118 dBc/Hz @ 10 kHz offset and typical sideband spurs of -70 dBc. Supplied in 0.60 x 0.60 x 0.22 in. package, synthesizer delivers typical output power of 0 dBm into 50 Ω load while operating...

Read More »
Electronic Components & Devices

PLL Synthesizer targets satellite modem equipment.

Operating from 470–520 MHz with 100 kHz step size, Model PCA0495B-LF provides phase noise of -97 dBc/Hz at 10 kHz offset and can be programmed through 3-wire serial interface. Device delivers typical output power of 4 dBm into 50 Ω load while operating off single supply voltage of 3.3 Vdc and consuming 25 mA of current. Housed in 0.50 x 0.50 x 0.13 in. package, synthesizer features spurious...

Read More »
Electronic Components & Devices

PLL Synthesizer facilitates improved integrated phase noise.

Supplied in 20-lead LFCSP, ADF4153A has RF bandwidth of 4 GHz and consists of low-noise digital phase frequency detector, precision charge pump, sigma-delta fractional-N divider, and programmable reference divider. Features include 2.7–3.3 V power supply, 1.8 V logic compatibility, -223 dBc/Hz PLL phase noise figure of merit, and PLL 1/f noise figure of -121 dBc/Hz @ 10 kHz offset normalized...

Read More »
Fixed Frequency Synthesizer has low phase noise.
Electronic Components & Devices

Fixed Frequency Synthesizer has low phase noise.

Model SFS4000C-LF features phase noise of -102 dBc/Hz at 10 kHz offset and typical sideband spurs of -65 dBc. Single frequency, RoHS-compliant synthesizer has 2nd harmonic suppression of -15 dBc and is phase locked at 4,000 MHz while using 10 MHz reference. Running off 5 Vdc supply and 3.3 Vdc PLL chip voltage, 0.60 x 0.60 x 0.22 in. coaxial resonator delivers output power of 0 dBm into 50 Ω...

Read More »
Electrical Equipment & Systems

Maxim's Essential Solutions Anticipate the Next-Generation Cellular Network

Maxim Integrated Products leverages analog integration to enable the evolving heterogeneous network (HetNet) SAN JOSE, Calif.- Maxim Integrated Products (NASDAQ: MXIM) announces several essential HetNet solutions needed for next-generation base-station equipment. The solutions include single-chip multiband radio transceivers, broadband gain blocks, direct RF synthesis DACs, and intelligent,...

Read More »

All Topics