Elbows

ICE Series Inside Corner Elbow enables installations in inaccessible locations.

ICE Series Inside Corner Elbow enables installations in inaccessible locations.

Used in ceiling installation for communications and power, hard-to-reach 90-degree bends under decks and below floors, ICE Inside Corner Elbow allows for multiple conduit runs which are to be installed in parallel without interference while accessing elbow’s cover. Providing smooth pulling surface for conductors to glide against, product enables for easy access when adding or removing cables...

Read More »
Replacement Metric Flat Face Fittings

Replacement Metric Flat Face Fittings

Replacement Fittings for Most Foreign Manufactured Equipment Mentor, OH, December 27, 2016 – Malone Specialty Inc., a quality manufacturer of industrial hose and hose fittings for over 30 years, is now manufacturing and stocking standard Metric Flat Face Fittings. Steve Malone, President of Malone Specialty Inc. stated, “For years we have been providing metric fittings and adapters use d by...

Read More »
Considerations for Choosing a Plastic Injection Molder
Sponsored

Considerations for Choosing a Plastic Injection Molder

Choosing a plastic injection molder is no small decision. There are a number of factors that play into your selection, and it's important to consider them all to ensure you find the plastic injection molding company that suits your unique needs. This eBook is your guide to identifying those factors to help you make an informed decision.

Read More »
Pulling Elbows make wiring pulls at right angles.

Pulling Elbows make wiring pulls at right angles.

Manufactured in CF8M (316 SS), pulling elbows are designed for use with rigid conduit.These products, which make wiring pulls at 90° bends in conduit system, can assist in instances of sharp bends and allow straight pull in either direction. Each pulling elbow comes with Type 316 SS cover, neoprene gasket, and Type 316 SS screws.

Read More »
Viega's New 45-Degree Elbows For Viega PEX Press Systems provide flexibility for larger tubing.

Viega's New 45-Degree Elbows For Viega PEX Press Systems provide flexibility for larger tubing.

Available in 1 1/2 and 2 sizes, Viega PEX Press 45-degree elbows feature Viega's patented Smart ConnectR feature, which allows water to flow past an unpressed fitting. Suitable for use in commercial applications, Viega PEX Press is molded from Radel-RR, a superior plastic material. Factory assembled with attached stainless steel sleeves with three view holes, 45-degree elbows can be used with all...

Read More »
T&B® Fittings meet ASTM A-321 and SA-312 standards.

T&B® Fittings meet ASTM A-321 and SA-312 standards.

Suitable for food and beverage market, T&B’s 45- and 90-degree elbows and 12-inch nipples, comes in both Type 304 and Type 316 stainless steel. Resistant to extreme corrosion and chemicals, Type 304 stainless steel has five times the service life and Type 316 stainless steel eight times the service life. Presented with- National Pipe Thread for easy installation, stainless steel conduit and...

Read More »

Capped Elbows are designed for use in hazardous locations.

Available for rigid wiring systems in hazardous locations, Malleable Iron Capped Elbows come in -½, -¾,- 1, and 1 -¼ in.- trade sizes and are UL listed for Class I, Group C/D; Class II, Group E/F/G; and Class III environments. These explosionproof products, which- feature malleable iron construction with- bright electro-zinc finish, provide pull-in capacity and 90° NPT threads for use...

Read More »
Connectors and Plugs serve commercial and municipal applications.

Connectors and Plugs serve commercial and municipal applications.

Used with Viega PEX Press system,- PEX Press test plugs (3/8–1 in., 1 -¼ in.,- and 1 -½ in.) have Smart Connect® feature. Also made of Radel R, 45° polymer PEX press elbows come in 1 -½ x 1 -½ in.- and 2 x 2 in. sizes. PEX Press bronze, 90° flare elbows- (-¾ and 1 in.) and PEX Press reducing tees (1 -½ x 1 -½ x -¾ in., 1 -½ x 1- -¼ x 1 in., and 1 -½ x 1 -¼- x 1 -¼ in.) are...

Read More »
Aluminum Deflection Elbows come in diameters to 12 in.

Aluminum Deflection Elbows come in diameters to 12 in.

Offered in tube and pipe sizes from 1.5–12 in., Smart Elbow® Deflection Elbows are suited for dilute-phase and dense-phase pneumatic conveying systems. Spherical chamber protrudes partially beyond desired 90° or 45° pathway, which causes ball of material suspended in air to rotate, gently deflecting incoming material around bend without impacting elbow wall or generating heat. Products help...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics