Data Acquisition Systems

Data Acquisition System works on FireWire network.
Data Acquisition Systems

Data Acquisition System works on FireWire network.

DAQPad-6052E provides 16 single-ended or 8 differential channels, 333 kS/s sampling rate, two 16-bit analog outputs, two 24-bit counter/timers, and 8 digital I/O lines. Its IEEE 1394 FireWire provides high-speed, continuous transfers to and from computer. Up to 4 devices can be daisy chained on same bus with no degradation in performance. Applications include lab automation acoustical testing,...

Read More »
Data Acquisition System operates on 12 Vdc for portability.
Data Acquisition Systems

Data Acquisition System operates on 12 Vdc for portability.

MC170-L data acquisition/signal conditioning system, with 8 or 16-slot capacity, is suitable for vehicle testing, engine test stands, or portable data acquisition applications. It includes 16-bit, 200 KHz A/D converter, P/N PCM862, and adapter cable, which connects into laptop computers running Windows 95/98 or NT. Softwire(TM) software enables system to be run in real-time, and provides...

Read More »
Data Acquisition System provides production line testing.
Data Acquisition Systems

Data Acquisition System provides production line testing.

DAQ 720 programmable 32-channel signal conditioning system, with 16-bit ADC resolution, accepts variety of signal inputs. It features aggregate sampling rate up to 32k samples/sec and Ethernet connectivity to PC or notebook computer. Software provides setup, data collection, data display and processing. It is compatible with Windows®, Mac or Linux OS, and will export data to LabVIEW,...

Read More »
Analog I/O Board plugs into PC/104 port.
Electronic Boards

Analog I/O Board plugs into PC/104 port.

Model 104-AI012-8 provides 8 single-ended or true differential analog input channels with 12-bit resolution and 24 parallel bits of digital I/O. Software included with board supports ADC, DAC, counter, and digital functions, with sample programs and source in C and Pascal for DOS, and graphical setup program in Windows. Analog inputs are software programmable for 0-5V, 0-10V, ±5V and...

Read More »
Measurement System provides up to 9,600 measurements/sec.
Data Acquisition Systems

Measurement System provides up to 9,600 measurements/sec.

Spider8 integrated digital measurement system incorporates signal conditioning, amplification, A/D conversion, filtering, and data acquisition. It connects to PCs or laptops via serial, parallel, or USB ports, and is immediately ready for use. Plug-in modules are available for measurement of strain, force, torque, weight, displacement, pressure, and other parameters using inductive,...

Read More »
Data Acquisiton Board provides 32 channels of 16-bit data.
Data Acquisition Systems

Data Acquisiton Board provides 32 channels of 16-bit data.

PCIDAQ 3220 data-acquisition board provides 32 single-ended or 16 differential analog input channels, resolution better than 1 part in 65,000, and data rates up to 110,000 samples per sec. It has 32 digital I/0 lines that are protected by 5,000 Vrms of isolation and noise-rejection ratio of 115 dB. Inputs accept voltages up to 24 Vdc, and output lines can sink up to 500 mA per channel. Board has...

Read More »
Module is suitable for test and measurement applications.
Data Acquisition Systems

Module is suitable for test and measurement applications.

Model 4867 data acquisition module can be used to control analog and digital devices from GPIB bus. It has 32 digital I/O lines, 6 relay driver outputs, 6 analog outputs, 6 analog inputs and 4 thermocouple inputs. Digital lines are high-power TTL lines with pullups that can be configured as inputs or outputs in 8-bit bytes. Relay driver outputs sink up to 300 mA and have reverse voltage...

Read More »
Remote Stations provide intelligent signal conditioning.
Data Acquisition Systems

Remote Stations provide intelligent signal conditioning.

Micro 2100-A4 and 2100-A16 Analog Input Remote Stations contain built-in stand alone on/off controllers and alarms. Model 2100-A16 has 16 controllers, while 2100-A4 has 4 controllers. Parameters that can be downloaded include control differential, auto/manual and manual on and off. Units require 1 pair of wire (RS485) or 2 pairs (RS422), to communicate with controlling host computer. They will...

Read More »
SCADA System is based on OPC client/server architecture.
Data Acquisition Systems

SCADA System is based on OPC client/server architecture.

PC-based CALgrafix integrates charting, logging, alarm and configuration for process values and controller functions. Automatic logging of data lets charts be created for specific period of time, such as logging data for shift. It can connect to network of other OPC-compliant temperature and process controllers. Applications include environmental and test chambers, plastic injection and...

Read More »
Programming Tools are used with data acquisition products.
Data Acquisition Systems

Programming Tools are used with data acquisition products.

DaqCOM(TM) uses Microsoft®'s Component Object Model (COM) for users who are developing custom applications with IOtech products. It features automatic data conversion, save/load function and context sensitive help. DaqCOM(TM) can be used with any COM-compatible language, including Visual Basic®, VBA®, Visual C++, Delphi(TM) and Java, operating under Windows® 98/2000/Me/NT....

Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
Sponsored

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.

Read More »

All Topics