Water Quality Monitoring Using a Telemetry Data Logger
Remote Data Automatically Sent to Desktop Every Monday Morning
CHESTERLAND OH — Recently CAS DataLoggers provided the water quality monitoring solution to a municipal water department which needed to record dissolved oxygen (DO) concentrations in several ponds and slow-moving rivers to determine the health of aquatic life. If DO concentrations in these water sources become too low, fish and other organisms will face significant risk, especially in stagnant environments. Since DO levels are strongly affected by temperature and are lower in summer, the customer wanted to take early measures to help protect fish from dying off this season.
Effective municipal water monitoring commonly requires sample collection, and the EPA has specified that the department needs to take a water sample every week in each of its bodies of water that are at risk of low DO levels. The department's technician wanted a remote telemetry datalogger to transmit data and alarms but found that leading manufacturers didn't offer models for environmental monitoring.
CAS DataLoggers supplied the department with three Frog RX GSM/GPRS Data Loggers as a low-cost remote monitoring solution. The Frogs are rugged field telemetry devices designed for rapid deployment at a low cost. The Frog RX dataloggers each have a single analog 4-20mA input with up to 8 channels to interface with many types of hydrometric sensors. The technician connected each Frog to a Depth/level pressure sensor and a Dissolved Oxygen/Temperature sensor. With this setup Channel 1 of each logger records water level while Channel 2 logs % Sat (Saturation) and Temperature.
At each remote site a Frog datalogger has been installed into a fiberglass cabinet with the connected sensors fitted into a GRP 100mm sq. box section stilling-tube enclosure. This enabled easy riverside installation. For added protection the Frog loggers have a rugged construction which can withstand temporary submersion, sealed to an IP68 rating.
Fitted with a socket for the external antenna, the Frogs automatically transmit all data via their GPRS communications, operating as remote outstations. Data capture is performed using Isodaq's telemetry server accessible via the internet. Now the department head receives all the data on his desktop PC every Monday morning along with text message warnings whenever preset DO levels are too low. Meanwhile the Frog's internal lithium battery pack is field-replaceable and only needs to be changed once every 5 years (with an option for an external lead acid cell). This is particularly effective when combined with low-cost GPRS ‘always-on' protocols.
The Frog's storage capacity holds 29,760 16-bit readings, and the oldest data is overwritten when full. This secure data storage in flash memory eliminates data loss if the battery should fail, and the Frogs give advance notice of this with their low-battery alarm. The technician only needs to travel out to the loggers when it's time to collect the water samples.
If especially low DO levels are present in any given body of water, the onsite Frog datalogger will alarm users so that preventative measures can be undertaken such as installing aeration equipment and removing excess algae. For effective environmental monitoring, the technician also connected a water sampler to each Frog. Each week when the data logger's sampler trigger alarm activates, the water sampler fills up a vial and caps it for later retrieval and lab analysis.
Harvest for Windows is the free software included with the Isodaq family of loggers. Harvest is available in versions for both Windows (98, 2000, XP, Vista or 7) and Windows Mobile (3, 5 or 6). Harvest allows users to set up the data loggers, configure recording rates alarms, and graph data for all channels.
Operators can also activate a control output on alarm, configure & test telemetry modems, export data to CSV or XML format files and more.
The Frog data loggers have already lowered the department's operating costs by logging every water value and automatically sending data directly to desktop--the Frogs are safely left to log even under hostile conditions. This Isodaq solution was well within the organization's budget and the remote telemetry capability now saves the organization the time and money otherwise spent sending someone out to collect the logger's readings. In future if the technician wants to utilize smart sensors, the Frogs also have an option for an SDI-12 compatible multi-channel expansion port.
For more information on our Isodaq remote telemetry data loggers for water quality applications, weather measurement, borehole measurement and more, or to find the ideal solution for your application-specific needs, contact a CAS Data Logger Applications Specialist at (800) 956-4437 or visit the website at www.DataLoggerInc.com.
Contact Information:
CAS DataLoggers, Inc.
12628 Chillicothe Road
Chesterland, Ohio 44026
(440) 729-2570
(800) 956-4437
sales@dataloggerinc.com
www.dataloggerinc.com