Ultracompact R&S TSME Drive Test Scanner Provides Maximum Mobility for Optimizing Wireless Networks

Whether in a test vehicle or in a backpack, the lightweight, compact R&S TSME drive test scanner from Rohde & Schwarz is setting new standards when it comes to optimizing wireless communications networks. The future-ready scanner has very high measurement rates and can simultaneously scan all relevant technologies in all bands.  

Munich – At Mobile World Congress 2014, Rohde & Schwarz will showcase the R&S TSME – a new, ultracompact drive test scanner for today's and tomorrow's wireless communications standards and frequency bands. Measuring 151 mm x 47 mm x 93 mm and weighing just 650 g, it is not only much smaller and lighter than competing devices, it also consumes very little power, making it the ideal solution for testing the quality of communications channels in the field as well as inside buildings where high data traffic presents a difficult set of problems. The test scanner achieves significantly higher measurement speeds than comparable devices.  

The advent of smartphones and tablets has led to a steady increase in mobile data volumes. As a result, drive tests used for the planning, setup and optimization of wireless communications networks have become indispensable. The R&S TSME helps network operators, infrastructure manufacturers and their service providers with their coverage planning, such as when refarming or when assigning a new spectrum. Benchmarking measurements with other wireless networks are also possible. And network operators can use interference measurements to identify transmission problems caused by overlapping neighboring cells or external interferers such as faulty lines or household electronics.   

Thanks to its 350 MHz to 4.4 GHz measurement bandwidth, the R&S TSME covers all bands specified for wireless communications technologies, and can simultaneously measure any combination of technologies in each band. Typical combinations include UMTS and GSM in the 900 MHz band, LTE and GSM in the 1800 MHz band, UMTS in the 2100 MHz band and LTE in the 2600 MHz band. A flexible pricing model allows network operators to configure the R&S TSME such that they only buy the bands they need.   

LTE-Advanced carrier aggregation measurements can now be performed with a single instrument thanks to the scanner's wide measurement bandwidth. In addition, the R&S TSME is a scalable solution that can help users roll out LTE networks with MIMO technology. Two or four R&S TSME scanners can be combined for special, MIMO 2x2 or MIMO 4x4 multichannel measurements.  

Particularly inside buildings such as airports, shopping centers and event venues, the scanner scores top marks by deploying it as the R&S TSME-Z3 backpack system – a low-noise, mobile test solution. Such locations have a high concentration of mobile phone subscribers and therefore very high data service usage. This is why network operators use special small-cell infrastructures such as micro/picocells, distributed antenna systems (DAS) and WLAN offloading to WLAN hotspots. Yet it is precisely these types of in-building networks that are vulnerable to interference. Network operators can now use the measurement results from the backpack solution to optimize their networks efficiently. The backpack system can accommodate up to four R&S TSME scanners and two mobile phones and comes with a range of accessories such as two batteries and an integrated USB hub.  

The R&S TSME drive test scanner and the R&S TSME-Z3 backpack system can now be ordered from Rohde & Schwarz. Rohde & Schwarz will be exhibiting the solution at MWC 2014 at its test solution booth for network operators (booth B50, hall 6).   

Press contacts:  

Europe (headquarters):

Christian Mokry

Phone: +49 89 4129 13052

Fax: +49 89 4129 13208

E-mail: press@rohde-schwarz.com   

North America:

Pam Sanders

Phone: +1 410 910 7908

E-mail: pam.sanders@rsa.rohde-schwarz.com   

Asia Pacific:

Wen Shi Tong

Phone: +65 6 307-0029

E-mail: WenShi.Tong@rohde-schwarz.com   

Contacts for readers:  

Customer Support Europe, Africa, Middle East:

Phone: +49 89 4129 12345

E-mail: customersupport@rohde-schwarz.com   

Customer Support North America:

Phone: +1 888 837 8772

E-mail: customer.support@rsa.rohde-schwarz.com   

Customer Support Latin America:

Phone: +1 410 910 7988

E-mail: customersupport.la@rohde-schwarz.com   

Customer Support Asia:

Phone: +65 65130 488

E-mail: customersupport.asia@rohde-schwarz.com   

Customer Support China:

Phone: +86-800-810-8228 or +86-400-650-5896

E-mail: customersupport.china@rohde-schwarz.com   

Rohde & Schwarz  

The Rohde & Schwarz electronics group is a leading supplier of solutions in the fields of test and measurement, broadcasting, secure communications, and radiomonitoring and radiolocation. Founded 80 years ago, this independent global company has an extensive sales network and is present in more than 70 countries. It has around 9300 employees and achieved a net revenue of EUR 1.9 billion (USD 2.5 billion) in fiscal year 2012/2013 (July 2012 through June 2013). The company is headquartered in Munich, Germany.  

More from Architectural & Civil Engineering Products

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers