Spiroflow Material Handling Solution Helps Recycle Fabric Waste & Water Bottles into Fiber

Spiroflow Systems, a respected leader in the bulk handling industry, is known for its innovative and effective design solutions. The company recently worked on a project to help recycle waste materials, including recycled plastic water bottles, into first quality recycled polyester fiber.

Spiroflow worked on this material handling project with Unifi, Inc., a leading producer of polyester and nylon yarns. Unifi developed REPREVE®, a recycled fiber made from pre-consumer waste and recycled water bottles, which can be used just like fiber made from virgin materials. REPREVE is a recycled ingredient that makes consumer products sustainable, and can be found in many products such as clothing, auto interiors, tote bags and home furnishings.  REPREVE is used by some of the world's leading brands like Ford, The North Face, Patagonia and Haggar.

Unifi built a new recycling center in Yadkinville, N.C. in 2010 to recycle pre-consumer waste, recycled bottles, and fabrics and garments.  They had three requirements for the material handling of plastic flakes from recycled bottles.  These requirements included: 

1. FILL:  Fill mixing silos with plastic flake from Gaylords and from bulk bags,

2. RECIRCULATE: Re-circulate plastic flake material within each of two silos and re-circulate material  between these two silos, and

3. DELIVER:  Deliver material to the next manufacturing process step. 

Spiroflow Solution:

To meet the customer's three requirements Spiroflow Systems provided a material handling system that included one (1) Box Dumper, two (2) Bulk Bag Dischargers, five (5) Flexible Screw Conveyors, one Hopper, four (4) Aero Mechanical Conveyors and one (1) Comprehensive Custom Control Panel with an HMI (Human Machine Interface).

The process steps for filling mixing silos are as follows:

1. Plastic flake material arrives in Gaylords & each Gaylord is placed in the Custom Built Box Dumper.  The Box Dumper empties plastic flake material into the live bottom Bulk Bag Discharging System.

Alternatively, flake material arrives in bulk bags.  Full bulk bags are placed in one of the two supplied bulk bag dischargers & the flake material is discharged from bulk bags.

2. The dual live bottom Bulk Bag Discharging System transports flake material via twin Flexible Screw Conveyors into a Hopper.

3. Material is passed through a metal detector where any metal particles are removed.

4. A third Flexible Screw Conveyor transports material to a vertical Aero Mechanical Conveyor.

5. The vertical Aero Mechanical Conveyor transports the material up to a second horizontal Aero Mechanical Conveyor.

6. The horizontal Aero Mechanical Conveyor advances forward to fill Silo A or advances in reverse to fill Silo B.

This configuration allows flake material to be emptied from bulk bags or Gaylords and fed into either silo, which is the first step in the manufacturing process.

The process steps for RECIRCULATING flake material are as follows:

1. There are two Flexible Screw Conveyors positioned at the bottom of each silo.  Each of these Flexible Screw Conveyors transport flake material to a vertical Aero Mechanical Conveyor.

2. The vertical Aero Mechanical Conveyor moves flake material to the top of the silos and into a horizontal Aero Mechanical Conveyor.

3. The horizontal Aero Mechanical Conveyor advances forward to fill Silo A or advances in reverse to fill Silo B.

This configuration allows material to recirculate within Silo A, recirculate within Silo B, recirculate from Silo A to Silo B or recirculate from Silo B to Silo A.  This is an important requirement as the flake material can have varying properties that are considered in the manufacturing process.

The process steps for DELIVERING flake material to the next process are as follows:

1. The same two Flexible Screw Conveyors positioned at the bottom of each silo can also discharge into a provided hopper.

2. Material from this hopper is conveyed to processing with fabric cut-waste.

This final step allows for the introduction of flake material into the initial manufacturing process.

Spiroflow recommended a complex but 'clean' and well designed solution to meet all of the requirements to fill, blend and recirculate plastic flake with different and varying properties.

The Spiroflow tests clearly demonstrated that their Aero Mechanical Conveyors could convey plastic flake better and faster than other methods.  Plus, their mechanical conveying solution offered significant energy savings over pneumatic equipment, which was recommended by other vendors.  Mathias Lee, Spiroflow Systems Vice President of Sales, acknowledged that 'Extensive material testing was required, but was important in verifying that our solution would operate as expected, at the rates we promised.  We highly recommend material testing to all of our customers.'

For over 40 years, Spiroflow has designed, engineered and manufactured its leading line of powder handling solutions.  A worldwide supplier of powder handling engineering and equipment, Spiroflow offers a wide range of standard and custom options for both small and large volume users.  Products include bulk bag dischargers and fillers, flexible screw, aero mechanical, tubular cable drag, tubular chain drag and pneumatic conveyors, box, sack and drum dump stations, and the 'Pacepacker' range of automatic packing, pick and place and robotic palletizing solutions.

Primary markets include food, dairy, snack food, confectionary, beverage, pet food, pharmaceutical, packaging, industrial, chemical, plastics, minerals, cement, water treatment, environmental, waste, and recycling.  For more information about Spiroflow Systems and their complete product line of bulk material handling solutions visit www.spiroflowsystems.com, email info@spiroflowsystem.com or call 704-246-0900 to discuss your specific requirements. 

For more information about Unifi, their history, products and commitment to sustainability, go to www.unifi.com or www.repreve.com.

Carolynn Sarver

Director of Marketing

Spiroflow Systems, Inc.

1609 Airport Road

Monroe, NC 28110

(704) 246-0951


REPREVE is a trademark of Unifi, Inc.

All Topics