RH/T Transmitter utilizes interchangeable probes.

Press Release Summary:




Equipped with probes that store calibration data, EE22 humidity/temperature transmitter handles temperatures from -40 to +176°F. RH and T outputs can be adjusted with push buttons on PCB, and temperature output can be scaled over 0-1/5/10 V or 4-20 mA current (2-wire) outputs. Optional display indicates RH and T. Direct wall- or DIN rail-mounted housing connects with sensing probes via 6.6, 16.4, or 32.8 ft cables.



Original Press Release:



NEW RH / T Transmitter with Interchangeable Probes - EE22 from E+E Elektronik



Time for a change... E+E Elektronik has designed the humidity / temperature transmitter EE22 with interchangeable probes. The calibration data is stored in the probes, and the most significant feature of the EE22 Series is the interchangeable sensing probes with connector, which allows the performance of the EE22 to not be affected. The accuracy over the entire temperature range is based on precise calibration methods. Well-proven E+E humidity sensor elements ensure excellent long-term stability. For cases where there are extreme temperature applications from –40°C up to +80°C (-40°F…+176°F) or limited space availability, the sensing probes can be connected to EE22 housing with cables (2, 5 or 10m / 6.6, 16.4 or 32.8ft) without any repercussions for the overall accuracy of the instrument. The temperature output can be scaled according to the application, for example 0 to 1 / 5 / 10 voltage or current 4 to 20 mA (2 wire) outputs. The EE22 is suitable for direct wall mounting and for installation on rails according to DIN EN 50022 - the optional display indicates the actual RH and T. In the pharmaceutical and biotechnology industries, a loop-calibration of the RH and T outputs, recommended by the Food and Drug Administration, can easily perform, using separate RH and T probes. The RH and T outputs can be adjust with push buttons on the printed circuit board. Typical applications for these transmitters are the pharmaceutical industries, clean rooms, storage rooms, green houses and cooling chambers.



Further information: E+E Elektronik GmbH

Langwiesen 7

A-4209 Engerwitzdorf

Austria

T: +43 – 7235-605-0

F: +43 – 7235-605-8

E: info@epluse.at

I: www.epluse.at

More from Controls & Controllers

All Topics