Polycarbonate Roofing withstands high winds and heavy snow loads.

Press Release Summary:

Intended for use as stadium roofing, Ultra-Stiff Lexan(TM) Thermoclear(TM) sheeting has capability to withstand wind and snow loading pressures of up to 2,200 N/m² and wind speeds up to 125 mph. Multiwall configuration provides thermal insulation, and sheet helps contribute to LEED certification by providing natural light and possible recycled content. Solar Control infrared grades reduce build-up of interior heat in arenas while increasing natural light transmission.


Original Press Release:

SABIC Innovative Plastics Scores Big at Stadia Design & Technology Expo with Launch of New Ultra-Stiff Lexan* Thermoclear* Sheet Solutions

LOS ANGELES - Here at the Stadia Design & Technology Expo, booth 2100, SABIC Innovative Plastics continues to lead in the plastics industry with the announcement of its latest polycarbonate (PC) sheet technology for stadium roofing. New Ultra-Stiff Lexan* Thermoclear* sheet builds on the company's impressive three decades of success in delivering state-of-the-art materials to help stadium architects and designers improve safety, durability and enable design freedom. With the ability to withstand high winds and heavy snow loads, Ultra-Stiff Lexan Thermoclear sheet was chosen for the free-hanging roof of the UEFA Euro 2012(TM) Football Championship Stadium in Slaski Chorzów, Poland. This new lightweight, high-performance material is the newest addition to SABIC Innovative Plastics' growing portfolio of sheet products that have proven their value to customers in over 50 stadiums worldwide. "Sports stadiums are often the focal point of a community and present an opportunity to make a daring architectural statement," said Carina Viola, segment leader, Building & Construction, Specialty Film & Sheet, SABIC Innovative Plastics. "Our tough, lightweight and versatile Lexan sheet products make it possible to create large and dramatic roofing and glazing elements that perform beautifully in a wide range of climates and conditions. With the global spotlight on sustainability, these materials are also an ideal choice for improving energy conservation. Our longstanding leadership and global visibility in the stadium sector is significant." Lexan Thermoclear sheet helps contribute to Leadership in Energy and Environmental Design (LEED) certification by providing natural light and possible recycled content. Solar Control infrared (IR) grades reduce build-up of interior heat in arenas while increasing natural light transmission. Another important benefit of Lexan Thermoclear sheet is its light weight, which makes it cost effective to transport and easier to handle and install compared to heavy glass panes. Also, the material can be used with a lighter supporting steel framework than glass requires, which can reduce material and shipping costs. Showcasing a Broad Portfolio of Sheet Solutions Being showcased at the show is SABIC Innovative Plastics' three-wall, X-structure, Ultra-Stiff Lexan Thermoclear sheet. This sheet delivers exceptional performance with the capability to withstand wind and snow loading pressures of up to 2,200 N/m2 equivalent to wind speeds up to 125mph (200km/h). It also offers up to 250 times the impact resistance of glass to reduce the risk of breakage from wind, hail and other extreme weather, as well as vandalism. The multiwall configuration of the product provides excellent thermal insulation. Another highlight of SABIC Innovative Plastics' exhibit is Lexan Thermoclick* sheet systems in 40 and 50mm (1.57 and 1.97 inches) thicknesses. These products are an excellent candidate for applications such as cladding and façades of stadiums. A unique, 9-wall structure with 39.4 inch-width (1000mm), the Lexan Thermoclick PC 50-mm sheet system not only offers twice the width of competitive products, but also provides a superb U-value of 0.176 Btu/h t2 Fahrenheit (1.0W/m2 K) for thermal insulation, leading to energy savings by reducing power consumption by up to 17 percent vs. traditional high-return, double-pane glass glazing. This new material greatly facilitates easy installation while providing excellent aesthetics. The Lexan Thermoclick 40mm sheet system and Lexan Thermoclear sheet products comply with CC1 (ASTM D635) and Class A (ASTM E-84) smoke and fire ratings. Both sides of Lexan Thermoclear sheet are treated with proprietary ultraviolet (UV) protection against outdoor weathering. Accelerated 4,000-hour weathering tests (DIN53387 / ASTM G26) performed by SABIC Innovative Plastics, prove Lexan sheets superior ability to maintain color, light transmission and impact strength in 10 years of outdoor exposure in moderate climate conditions. Lexan Thermoclear sheet in XP grades offer a 15-year limited written warranty against discoloration, loss of light transmission and loss of impact strength due to weathering. Available in clear, opal white, solar control blue, bronze, gray, two green shades as well as a broad range of other colors, Lexan Thermoclear sheet also provides a variety of specialty coatings. For example, the Easy Clean grade has a proprietary technology that allows Lexan sheet to be easily cleaned with rainwater, resulting in significant cost savings. In addition, select monolithic grades of Lexan sheet offer anti-graffiti properties or compliance with building codes established by the International Conference of Building Officials (ICBO). With exclusive abrasion-resistant coated surface on both sides, Lexan Margard* MR10 sheet offers a 10-year limited written warranty against breakage, yellowing, loss of light transmission and coating delamination for potential use in dugouts, storefronts and windows, low-level physical attack areas, entrance doors and railings. This virtually unbreakable, transparent PC sheet provides remarkable clarity - even after many years of intense sunlight and weather extremes. Stadiums Around the Globe Feature Lexan Sheet Building on three decades of proven performance, Lexan sheet is the material of choice of architects and designers for roofing, walls, stairway enclosures and many more applications in well-known arenas and stadiums around the world. In 2010, the company won its second European Polycarbonate Sheet Extruders (EPSE) Award for the Best Project and Innovation for the new 50,000-seat Aviva Stadium in Dublin. The stadium's transparent, curvilinear walls are constructed from Lexan monolithic sheet, which contributes elegance, high performance and environmental benefits. UV-resistant Lexan sheet was also chosen for the roofing, façades and stairway glazing of the Soccer City Stadium in Soweto, Johannesburg, South Africa, where the opening and closing 2010 FIFA World Cup(TM) matches were played. For the 2014 World Cup and 2016 Olympic Games in Brazil, SABIC Innovative Plastics' engineering and design team is currently working closely with the Brazilian Soccer Committee for potential projects. For additional information on SABIC Innovative Plastics' Lexan sheet products, please go to www.sabic-ip.com. For technical product inquiries, please contact us at www.sabic-ip.com/prtechinquiry. About SABIC Innovative Plastics SABIC Innovative Plastics is a leading, global supplier of engineering thermoplastics with a 75-year history of breakthrough solutions that solve its customers' most pressing challenges. Today, SABIC Innovative Plastics is a multi-billion-dollar company with operations in more than 35 countries and approximately 9,000 employees worldwide. The company continues to lead the plastics industry with customer collaboration and continued investments in new polymer technologies, global application development, process technologies, and environmentally responsible solutions that serve diverse markets such as automotive, electronics, building & construction, transportation, and healthcare. The company's extensive product portfolio includes thermoplastic resins, coatings, specialty compounds, film, and sheet. SABIC Innovative Plastics (www.sabic-ip.com) is a wholly owned subsidiary of Saudi Basic Industries Corporation (SABIC). About Saudi Basic Industries Corporation Saudi Basic Industries Corporation (SABIC) ranks among the world's top petrochemical companies, and is a global market leader in the production of polyethylene, polypropylene, advanced thermoplastics, glycols, methanol and fertilizers. SABIC manufactures with a global footprint in Saudi Arabia, the Americas, Europe and Asia Pacific. The company operates in more than 40 countries across the world with 33,000 employees worldwide. It has significant research resources with 18 dedicated Technology & Innovation facilities in Saudi Arabia, the USA, the Netherlands, Spain, India and China. SABIC recorded a net income of SR 21.59 billion(US$ 5.73 billion) in 2010, and sales revenues totaled SR 152 billion (US$ 40.5 billion). * Trademarks of SABIC Innovative Plastics IP B.V.
TM UEFA Euro 2012 is a trademark of Union of European Football Associations for Infobox.
TM 2010 FIFA World Cup is a trademark of Fédération Internationale de Football, Association.

All Topics