Pneumatic and Electric Piston Pump manages fluids from 150°F to 250°F.

Press Release Summary:

Constructed from PEEK thermoplastic-polymer seal cartridges, Pneumatic and Anchor Electric Piston Pump handles high-heat and chemically hazardous composition and viscosities. Featuring detachable foot valve and high-temp stuffing boxes, Pneumatic comes in Model 101 that produces lifts to 555ft., Model 102 maintains steady flows to 5 US gpm and Anchor comes in Model 101 that produces lifts to 804ft at 1HP and Model 102 offers flows to 3.27gpm.


Original Press Release:

New High-Temp Pumps From Blackhawk for Fluids to 250°F: Pneumatics & Electrics Specially Built for ETLF Landfills

Power and motor-mechanicals safely above wellhead; any liquid, any angle to horizontal

Blackhawk Technology Company, the industry’s pumping-innovation leader for the past 25 years, introduces a new line of technologically advanced pumps and products built to manage fluids from 150°F to 250°F in Elevated Temperature Landfills (ETLFs) and other extreme environments.

The V-2 High-Temp Pneumatic Piston Pump™ and Anchor High-Temp Electric Piston Pump™ handle virtually anything flowable, regardless of chemical composition and viscosities, including boiling liquids.

Specialty materials of construction for the High-Temp line include PEEK thermoplastic-polymer seal cartridges and pistons, Viton® fluoropolymer seals and U-cups, brass oiler plates and green-fiber thermoplastic rods, all developed for high-heat, chemically hazardous duty.

“Blackhawk’s High-Temps are the only environmental pumps we have found that stand up to temperatures of 250°F or greater,” Mark Bertane, Blackhawk president, said.

Customer-inspired innovations in the High-Temp line include a newly developed detachable foot valve that is easier to disconnect and clear of downhole fluid clogs, and High-Temp stuffing boxes/seal plates that feature a drain port funneling any external fluid back into the well system.

Patented snap-in stuffing-box cartridges offer quick-exchange, above-ground seal replacements.

Both the V-2 and Anchor offer two models to meet varying flow and lift requirements. The V-2 High-Temp Pneumatic Model 101 produces lifts to 555 feet; Model 102 maintains steady flows to 5 US gallons per minute (gpm).

Anchor High-Temp Electric drive motors are available in ½ HP and 1 HP versions. Model 101 produces lifts to 804 feet at 1 HP; Model 102 offers flows to 3.27 gpm. Anchors also can be made explosion proof.

As with other Blackhawk top-head-drive piston pumps, all power and driver mechanicals are cleanly and safely above the wellhead. There is no high-pressure air or electricity introduced below surface grade. Maintenance is less frequent, simpler and faster than with other types. The pumps are indifferent to vacuum, environmentally friendly and do not emit greenhouse gases.

Blackhawk High-Temp products are successfully pumping at several of North America’s most troublesome landfill sites.

NOTE: For landfills below 150°F, order standard Blackhawk electric, pneumatic or solar models. Above 250°F, contact Blackhawk to customize pumps with ultra-high-temperature components.

Blackhawk Technology Company is the originator and the No. 1 manufacturer of above-wellhead, positive-displacement piston pumps – leading-edge technology refined by 25 years of customer-driven improvements. Blackhawk continues to introduce innovative products to the industry’s most comprehensive line of electric, pneumatic, solar and windmill-driven piston pumps and pump supplies, all designed to withstand the harshest weather and downhole pumping environments.

Founded in 1990, the company originated landfill and groundwater remediation piston pumps now covered by several patents and marks, with others pending. No company offers more real-world piston-pumping experience in tough landfills, chemical facilities, hydrocarbon production and remediation sites throughout North and South America, Europe, Asia, Africa and Australia.

To learn more and see how a piston pump operates, visit www.blackhawkco.com or call 800-469-4887.

Company Contact:  Mark Bertane                             Media:  Bob Carr

Phone: 800-469-4887                                                 Phone:  630-697-2876 

Fax: 630-469-4896                                                     Fax:  630-469-4896

Email: mbertane@blackhawkco.com                        E-mail: bcarr@blackhawkco.com

More from Controls & Controllers

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers