New 11 Foot Air Bi-Fold Ramps Offer 9.5 Degree Load Angle

Press Release Summary:

  • Provides soft ground contact and new surfaces free from being damaged
  • Accommodates load angle necessary when loading cumbersome low clearance equipment such as paving equipment and directional drills
  • Available in 45” wide x 11’ (7.5’ + 3.5’) wood inlaid

Original Press Release:

Felling Trailers, Inc. Showcases New Air Bi-Fold Ramps at CONEXPO-CON/AGG 2020

(Sauk Centre, Minnesota, February 28, 2020) CONEXPO-CON/AGG international exhibition is known for being the host to company's debuting new products to their industry partners. Felling Trailers, Inc. will follow suit, introducing their new Air Bi-fold Ramps (patent pending) at this year's show. The Air Bi-Fold Ramp system is featured on Felling's 25-ton FT-50-3 LP, a tri-axle low profile flatbed tag trailer. Felling Trailers, Inc. will be at Booth F-1741 in the Festival Grounds Lot.

Few manufacturers in the marketplace offer an Air Bi-Fold Ramp system, let alone with the functionality that Felling's offers. A key feature of Felling's design is in the operation of the flip ramp. The flip ramp locks out fully when extending preventing scraping or marring of the ground, which is undesirable, especially if it's a new surface of any kind. Another key feature is Felling' controlled flow air ramp technology, which provides for soft ground contact of the ramp, keeping new surfaces free from being damaged.

The Air Bi-Fold Ramps are 45" wide by 11' (7.5' +3.5') wood inlaid. For close to a decade, Felling Trailers has offered air ramps with available lengths of 6’ to 8’. The 11’ Air Bi-Fold ramps were designed to accommodate the load angle necessary when loading cumbersome low clearance equipment such as paving equipment and directional drills. The Air Bi-Fold ramps’ length provides the operator with a gentler, more gradual incline to provide ease in loading/unloading with its 9.5º load angle with the option of air ride suspension when the air is dropped. Felling Trailers’ Air-Ramp technology allows operators to use the tow vehicles’ onboard air system to power the ramps, eliminating the maintenance of an onboard electric/hydraulic system. Furthermore, the patent-pending technology allows for minimal ground contact when deploying/retracting the ramps to reduce damage to new pavement when loading/unloading.

Felling Model FT-50-3 LP with Air Bi-Fold Ramps

  • 26’ Main Deck Length Plus 6’ Double Incline Beavertail, Apitong Decking
  • 45” Wide x 11’ (7.5’ + 3.5’) Bi-Fold Air Operated, Apitong Inlaid Ramps
  • Air Brakes, ABS 2S/1M, Meritor WABCO (parking brakes on all axles)
  • 25K Ridewell Oil Bath Axles
  • 55” Spread, Ridewell 240 Air Ride with Dump Valve Suspension
  • Air Lift Axle on 1st Axle
  • 235/75R 17.5” Tires on 8 Bolt Aluminum Alcoa Dura Brite Wheels
  • 140,000 lb Twin 2-Speed Jack (39,000 lb. Lift Capacity)

Felling Trailers, Inc. will be at Booth F-1741 in the Festival Grounds Lot. The Festival Grounds Lot showcases exhibitors in Earth Moving & Material Handling, Hauling, Lifting (Aerial & Cranes), and Underground Construction. Demonstrations of Felling's Air Bi-Fold Ramps will be taking place in the booth throughout the duration of the show.

CONEXPO-CON/AGG is the international gathering place every three years for the construction industries. The event features exhibits of the latest technologies, equipment, products, and services plus industry-targeted education.

IFPE returns every three years to showcase the latest innovations and expertise in the fluid power, power transmission, and motion control industries. The event features exhibits of the latest technologies, equipment, products, and services plus industry-targeted education.

The next CONEXPO-CON/AGG (IFPE) is set for Tuesday, March 10 through Saturday, March 14, 2020, at the Las Vegas Convention Center, Las Vegas, NV.

About Felling Trailers, Inc.

Felling Trailers is a family-owned and operated Full Line Trailer Manufacturer located in Central Minnesota. Started in 1974, Felling Trailers, Inc. has grown from a small shop to a factory and office complex that today covers over 325,000 square feet. Felling's pride and differentiation is its customized trailer division. Its engineers utilize the latest Industry-leading design techniques, and its experienced metal craftsmen use cutting-edge technology to turn its customers' conceptual trailer needs into a tangible product. Felling has been providing innovative trailer solutions to the transportation industry for over 45 years. Felling Trailers' current capabilities allow them to provide a high-quality product that is distributed across North America and internationally. Felling Trailers, Inc. is an ISO 9001:2015 Certified Quality Management System Company, WBENC-Certified WBE, and an Equal Opportunity Employer.

For more information, contact 1.800.245.2809, sales@felling.com, or visit them on the web at www.felling.com. You can also follow them on Twitter (@FellingTrailers), Facebook (Felling Trailers, Inc.), and Pinterest.

Contact:
Rebecca Gerads, Marketing Coordinator
Company: Felling Trailers, Inc.
Address: 1525 Main Street South
Sauk Centre, MN 56378
Phone: 1.800.245.2809
Fax: 320.352.5230
E-mail: Rebecca.gerads@felling.com

Contact This Company

More from Transportation Industry Products

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers