MaxLite Takes Manhattan! LIGHTFAIR 2015 Featured Products


WEST CALDWELL, N.J. - MaxLite will showcase its latest LED lighting innovations at LIGHTFAIR 2015, May 5-7, at the Javits Center in New York City. Below are just a few of the products we’ll be highlighting at the show. For more information, or to see our full line up of LED lighting solutions, stop by Booth #115 for a demonstration or contact your local MaxLite representative.



INDOOR



Polygon - a new architectural linear fixture that integrates multiple mounting and optic possibilities into a sleek form factor. The Polygon is offered in low bay and parking optic distributions, with several outputs and crisp white color temperatures to choose from.



Adjustable Downlight Retrofits - designed to fit standard five- and six-inch recessed housings, these downlight retrofits swivel and tilt to create beautiful, custom directional lighting for wall art, sculptures, product displays and surface tops, such as counters or tables. The lens rotates up to 355 degrees, and tilts up to 30 degrees vertically, for limitless accent lighting possibilities, even in damp locations.



Faux Can – a BUILDINGS Magazine 2015 Money-Saving Product, this downlight retrofit eliminates the use of a bulky recessed can, and time and labor costs associated with opening and repairing a drywall ceiling. Faux Cans can be easily mounted to a standard four-inch junction box or retrofitted to an existing can, giving installers the quickest and most cost-effective way to achieve energy-efficient downlighting.



Lightbars – MaxLite’s versatile lightbars have been upgraded with an efficacy improvement of 20 percent, dimming down to five percent with Cirrus Logic TRIAC, new installation accessories and an on/off cord. The new models are also now eligible for utility rebates as task and cove lighting.



Lensed Retrofit Kit – an LED integrated lensed retrofit solution for all troffer fixtures, including parabolic.



Strip Light Retrofit Kit – a retrofit solution for eight-foot strip light fixtures currently utilizing the T12 fluorescent tube, which is being phased out of the market.



Lamp Ready Fixtures – designed to be paired with MaxLite brand LED Linear T8 by-pass type replacement lamps to create a complete UL-listed fixture by the most economical means. Available in Vapor Tight, Utility Strip and Linear Highbay housings, Lamp Ready fixtures enable installers to avoid bypassing the ballast and adopt the energy-saving benefits of LED technology while keeping the UL-listing of the product intact.



Residential Fixtures - new fixtures include flush mount ceiling fixtures, wall sconces and porch lights in traditional, architectural and contemporary styles.



Highbays – several new series of commercial and industrial highbays are being introduced. Covering all applications, from retail to heavy industrial, fixtures from 135-watt integrated acrylic 16” bell types to 620-watt modular replacements for 1,500-watt HID highbays are being shown.



OUTDOOR



QuadroMAX - a new universal, scalable fixture that stretches across four categories of outdoor lighting. Accommodating up to 180W of LEDs with different distributions, the fixture can be mounted as an area light, flood light, wall pack or garage/canopy light, making it possible to design an entire outdoor project with just a single product. QuadroMAX comes with surge suppression and dimming as standard in a sturdy yet lightweight body that evenly distributes weight and minimizes wind loading.



Architectural Flood Lights – a sleek new series of architectural-grade flood lights designed to create bright, shadow-free security and spot lighting for outdoor applications, including facades, landscapes, public places, retail and residential complexes, and hospitality. The series is available in small, medium and large outputs, ranging from 20W-150W, to replace metal halide fixtures up to 400 watts.



Gas Station Canopy Fixture – a luminaire for service stations that delivers high efficiency in a new form factor that requires only one person to install. Replacing up to a 400-watt metal halide fixture while consuming less than 100 watts, the fuel pump fixture can be recess-mounted to any canopy with round or square cutout sizes between 3.9” and 9.8” wide.



DiscLED Luminaires – a contemporary new discus design, available in a canopy or post top fixture, as a high-efficiency replacement for metal halide fixtures up to 400 watts. The Disc is rated for use in wet locations.



C1D2 StaxMAX – MaxLite’s popular, modular StaxMAX fixture is now offered in a UL 844-listed version rated for use in Class 1, Division 2 spaces that require explosion-proof lighting, such as petroleum refineries, gasoline storage and dispensing areas, dry cleaning plants, spray finishing areas, aircraft hangars and utility gas plants. The C1D2-rated StaxMAX can be specified in base modules of 135 watts, with up to three modules per fixture. Each of the modules can have a narrow, medium or wide beam angle, allowing users to have all three optics in one luminaire.



LED LAMPS



Puck Lamp - the first GU24-base LED light source rated for use in fully enclosed luminaires to be listed on the ENERGY STAR CSD. Available in GU24 and E26 bases and warm white color temperatures, the Puck is a high-lumen, replaceable light source designed for use in shallow fixtures such as closet lights, ceiling fans, porch lights and torchieres.



Vintage LED Lamps – a new series of vintage-style filament lamps geared towards hospitality, retail and residential applications with a super warm, 2200K color temperature. Offered in A19, ST18, T14, G30 and B11 shapes. A half-chrome A19 lamp is also available in 2700K.



High Wattage Post Top Lamps – by popular request, MaxLite’s post top lamps are now available in higher outputs of 40W and 50W to replace 150- to 200-watt metal halide lamps.



DirectFit T8, T5 and PL Lamps – ballast-compatible replacement lamps install without any extra labor or re-wiring for instant energy savings.



Omnidirectional A19 Lamp – a 2014 Lighting For Tomorrow Award recipient, MaxLite’s ENERGY STAR qualified omni A19 lamp has gotten a makeover. Now in a rounded, more traditional-looking form factor, the 9-watt lamp replaces a 60W incandescent bulb with more than 85 percent savings in energy.



About MaxLite (www.maxlite.com)

MaxLite has been committed to providing energy-efficient lighting products for more than 20 years. One of the first movers into LED technology in the industry, MaxLite offers an extensive line of state-of-the-art indoor and outdoor LED lamps and luminaires under the MaxLED brand. A three-time recipient of the prestigious ENERGY STAR Partner of the Year Award for its industry leadership, MaxLite continues to be at the forefront of energy-efficient technologies through the innovative research and development capabilities of its New Jersey headquarters and California office. For more information, call 800-555-5629, email info@maxlite.com



MaxLite® 12 York Avenue, West Caldwell, NJ 07006 Tel: (973) 244-7300 1-800-555-5629 Fax: (973) 244-7333 E-mail: info@maxlite.com Web: www.maxlite.com



Contact information: Amy Silver, MaxLite, 12 York Ave, West Caldwell, NJ 07006



Contact: Amy Silver, T 973.244.7300 x111

Email: asilver@maxlite.com  

More from Packaging Products & Equipment

All Topics