ER5025S Shielded SMT Inductors meet MIL-PRF-39010 standards.

Press Release Summary:

ER5025S Shielded Surface Mount Inductors are offered inductance values ranging from 0.10 to 10,000 µH, Q min from 40 to 60. Units are suitable for communication, guidance, security, radar, test & evaluation and special mission applications in military, aerospace and space industry. Inductors provide min SRF MHz from 1.0 to 450 and max DCR Ohms from 0.025 to 139 and feature an operating temperature range from -55°C to +105°C and current rating from 30 to 2245 mA DC.


Original Press Release:

Shielded Surface Mount Inductors with Established Reliability

Gowanda is First in Industry to Offer Shielded ER SMT Inductors for Military RF Applications

23 January 2018, Gowanda, NY (USA) - Gowanda Electronics, a designer and manufacturer of precision electronic components for radio frequency and power applications, announces the introduction of the industry’s first off-the-shelf Shielded RF Surface Mount (SMT) Inductors with Established Reliability (ER) rating. The first-ever shielded ER SMT series – Gowanda ER5025S – complements MIL-PRF-39010 Qualified Product List (QPL) axial-leaded (thru-hole) products and enables their conversion to SMT circuitry via this new MIL-PRF-39010 qualified SMT series. This series was developed by the company in response to a market need for shielded surface mount options to the traditional thru-hole designs. SMT components enable the use of more efficient assembly methods when compared to thru-hole methods. Gowanda was the first in the industry to offer an ER series in a surface mount configuration last year, Gowanda ER3013.

“This introduction of a shielded ER surface mount series is a result of Gowanda’s commitment to develop inductor designs that address the evolving needs of the design engineering community,” said Don McElheny, CEO of Gowanda Components Group. “We will continue to introduce more ER SMT series in the future”, he added.

The ER5025S series meets the military’s QPL requirements for Established Reliability to failure rate level M and addresses two MIL-PRF-39010 slash numbers (/17 and /18). This qualification required extensive testing for electrical, environmental, mechanical and thermal performance. Level M represents the first level of failure rating for off-the-shelf inductors for high-reliability applications. In its ongoing commitment to the military market, Gowanda intends to achieve higher level failure ratings (Level P, then Level R) as ongoing testing continues to accumulate the hours necessary to attain those ratings on this shielded ER SMT series.

Gowanda’s wirewound, molded, shielded ER5025S series is designed for RF applications in military, aerospace and space – including defense and NASA communities – for use in communication, guidance, security, radar, test & evaluation and special mission applications. This shielded series – with 3% max coupling – is used specifically in applications where the close proximity of circuit board components requires the inductor to be shielded to minimize interactions and ensure performance of the overall system.

The performance range provided by the ER5025S series includes inductance from 0.10 to 10,000 µH, Q min from 40 to 60, SRF MHz min from 1.0 to 450, DCR Ohms max from 0.025 to 139, and current rating mA DC from 30 to 2245. The MIL-PRF-39010 slash number determines specific performance, core type (phenolic, powdered iron or ferrite) and shielding type (iron sleeve or ferrite sleeve). Operating temperature range is -55°C to +105°C. See the performance data table and ER5025S datasheet link below for additional information.

Performance Ranges for Gowanda’s MIL-PRF-39010 Level M Established Reliability Shielded Surface Mount Inductor Series – ER5025S

Gowanda Series           Military Slash Numbers          L µH            Q Min            SRF MHz Min         DCR Ohms Max    Current Rating mA DC

  ER5025S                      M39010/17                          0.10 - 12        40 - 45            37 - 450                 0.025 - 2                    250 - 2245 
                                       M39010/18                         15 - 10000      40 - 60            1.0 - 42                   0.8 - 139                    30 – 395

Gowanda has been designing and manufacturing RF and power inductors – both thru-hole and SMT – for the military’s Qualified Products List for many years. That experience combined with several successful ER thru-hole qualifications set the stage for the development of the industry’s first ER SMT inductors last year, and now the industry’s first shielded ER SMT inductors. Gowanda’s new Hi-Rel QPL Brochure http://www.gowanda.com/pdfs/Gowanda-HiRel-QPL-Brochure-4pg.pdf provides a helpful overview.

For more information regarding pricing, delivery, higher reliability or upscreening requirements please contact Gowanda Electronics at USA +1-716-532-2234 or sales@gowanda.com. For more information about QPL go to the website for Defense Logistics Agency DLA Land and Maritime at http://www.dla.mil/LandandMaritime.aspx.

Gowanda Electronics (www.gowanda.com) is a privately held company that designs, manufactures and supplies precision electronic components for RF, microwave and power applications. Components include standard off-the-shelf and custom-designed inductors, chokes, coils, conicals, toroids, transformers and magnetic devices in surface mount and thru-hole configurations that are used in a wide variety of electronic applications. Gowanda’s products are used primarily by OEM companies and other entities interested in high performance electronic component solutions for the equipment and devices they manufacture. Applications include use in industrial automation & control equipment, instrumentation, medical & diagnostic equipment/devices and test & measurement equipment. Such products are used in a broad range of industries including aviation/aerospace, data processing, defense, education, health care, process & assembly industries, security and telecommunications. Gowanda’s customers include Fortune 500 companies and other significant players in these global markets. The company is certified to AS9100, ISO9001 and ISO13485 quality management standards and offers RoHS compliant products as well as Pb (lead) containing components for QPL military/defense and other demanding requirements. Non-magnetic inductors are also available. Gowanda Electronics, Dyco Electronics, Communication Coil, Butler Winding, TTE Filters, Microwave Circuits and Instec Filters are all affiliates of Gowanda Components Group (www.GowandaComponentsGroup.com).

Download Spec Sheet

More from Computer Hardware & Peripherals

All Topics