Capacitive Accelerometer suits structural analysis, NVH jobs.
Press Release Summary:
Incorporating K-Beam® technology, Type 8315A series measures acceleration and low-frequency vibration in primary sensing axis within automotive, aerospace, OEM, R/D, and general laboratory test applications. Comprised of 6 models, series includes 3 housing and electrical interface options and is powered by one +6 to +50 Vdc supply. All incorporate MEMS variable capacitance sensing element and measurement ranges from ±2 to ±200 g as well as frequency response of 0-1,000 Hz (5%) are available.
Original Press Release:
Kistler North America Introduces High-Sensitivity, Single Axis K-Beam® MEMS Capacitive Accelerometer for Structural Analysis and NVH
Farmington Hills, Michigan, USA - Kistler North America (www.kistler.com), a worldwide supplier of precision sensors, systems and instrumentation for the dynamic measurement of pressure, force, torque and acceleration, has introduced the Type 8315A, a high-sensitivity, low-noise single axis MEMS capacitive accelerometer series. Incorporating the company's own K-Beam® technology, the Type 8315A is designed to measure acceleration and low-frequency vibration in the primary sensing axis within a variety of automotive, aerospace, OEM, R&D and general laboratory test applications.
The Kistler Type 8315A series is available in six different models, with measurement ranges from ±2 g to ±200 g and a frequency response of 0 to 1000 Hz (5%). The compact design provides a 1-inch (25.4 mm) footprint and incorporates a MEMS variable capacitance sensing element, consisting of a small inertial mass and flexure element sandwiched between two parallel plates. As the mass deflects under acceleration, the capacitance between the element and plates changes, which is converted to a proportional voltage by the internal analog signal conditioner. The Kistler Type 8315A series offers excellent thermal stability and reliable performance over an operating temperature range of -65°F to 250°F (-55°C to +125°C). It is powered by a single wide range supply between +6 and +50 VDC and has an internal voltage regulator. The accelerometer is shock rated to 6,000 g pk.
Models within the Kistler Type 8315A series are offered with three different housing and electrical interface options (AC, TA, TB), which determine available output signal formats. The AC option features a lightweight, hard anodized aluminum housing with environmental sealing, integral ground isolation, epoxy seal and integral PVC cable, with a maximum operating temperature of +185°F (+85°C). Available output signal formats for the AC option are bipolar at 0±4 V, single ended 2.5V±2V or differential 0±8V accelerometer outputs. Kistler Type 8315A series TA and TB options feature lightweight, welded titanium housings with choice of industry standard 4-pin, ¼-28 connector or integral Teflon jacketed cable, for a fully hermetic design with integral ground isolation. The maximum operating temperature on these units is +250°F (+125°C). Available accelerometer output signal formats are bipolar at 0±4 V, single ended 2.5V±2V (both with temperature output) and differential 0±8V output. For the TA and TB options, a temperature output is provided if external compensation of output signal is desired.
Recommended optional accessories for use with the Kistler Type 8315A series include magnetic, off-ground adhesive or 10-32 screw mounting bases; a triaxial mounting cube; and various flexible, breakout, extension and output cabling options.
The Kistler Type 8315A series is suitable for a variety of R&D and OEM applications, particularly where use of an instrument-grade accelerometer for high-precision, low-frequency measurements and high-durability packaging are absolute requirements. Typical applications include low-frequency aerospace ground vibration testing; structural dynamics; automotive laboratory testing, road testing and vehicle ride assessments; structural response testing of bridges and other civil structures; seismic ground and structural testing; and R&D applications, such as human motion studies and platform motion control systems. For additional details, drawings and specifications, please contact Kistler North America toll-free (in the US & Canada) at 1-888-KISTLER, via email at sales.us@kistler.com, or by visiting www.kistler.com.
About Kistler North America:
Kistler North America (www.kistler.com), a Kistler group company, is a supplier of precision sensors, systems and instrumentation for the dynamic measurement of pressure, force, torque and acceleration, as well as related electronics and software serving the automotive, aerospace, industrial, metal processing, plastic injection molding, R&D and testing & evaluation communities. Kistler products, ISO certified since 1994, are well recognized for performance, quality and reliability. With global headquarters in Winterthur, Switzerland and established North American operations since 1955, Kistler's expansive global sales presence is supported by the activities of 25 group companies and 30 distributors ensuring customer proximity, individualized application support and short product lead times. K-Beam®, PiezoBeam®, Piezotron® and PiezoStar® are registered trademarks of Kistler.
