Analog-to-Digital Converter has clock frequency of 500 Msps.

Press Release Summary:



Monolithic Model AT84AS001TP enables system designers to digitize signals with frequencies up to 250 MHz at 12-bit resolution. With 0.5 dB band flatness from DC-250 MHz, unit provides 62 dBc SNR, 75 dBc SFDR, and 10 ENOB at 500 Msps over first Nyquist zone with 2-tone inter-modulation distortion limited to -70 dB. Required analog input signal amplitude is 1.1 Vpp, and can be ac or dc coupled. Three-wire serial interface offers software control of ADC gain and offset.



Original Press Release:



Atmel Introduces the World's Fastest Monolithic 12-bit Analog-to-Digital Converter



GRENOBLE, France, March 15 / / -- Atmel(R) Corporation (NASDAQ:ATML), a global leader in the development and fabrication of advanced semiconductor solutions, announced today the industry's fastest, commercially- available, monolithic 12-bit analog-to-digital converter (ADC) with a clock frequency of 500 Msps. The AT84AS001TP will allow system designers to accurately digitize signals with frequencies up to 250 MHz at sampling rates that could not have been achieved before with 12-bit resolution.

With current commercial offerings for 12-bit ADCs limited to 250 Msps designers are forced to use several down-conversion hardware stages before entering the analog signals into the ADC, and to interleave several ADCs to get high data rates. Providing a major step forward in sampling rate without compromise on performance, the AT84AS001TP will set a new standard, allowing simpler system architectures while offering the possibility to sample wider bandwidth signals. This will benefit many applications including telecommunications infrastructure, high IF broadband digital receivers, test and measurement equipment, high-speed data acquisition, and defense radar and communications systems.

Thanks to its 0.5 dB band flatness from DC to 250 MHz, the AT84AS001TP provides an impressive 62 dBc SNR, 75 dBc SFDR and 10 ENOB at 500 Msps over the first Nyquist zone with two-tone Inter-Modulation Distortion (IMD) limited to -70 dB. This high level of performance is achieved while dissipating a very moderate 2.3W with 3.3V and 5V power supplies. The required analog input signal amplitude is only 1.1 Vpp, and can be AC or DC coupled. An integrated three-wire serial interface offers convenient software control of the ADC gain and offset.

"The AT84AS001TP is clearly a step ahead of the competition, being the first monolithic 12-bit ADC available on the market to provide a guaranteed 500 MHz sampling rate without any compromise on performance," said Jean- Charles Terrien, Strategic Marketing Manager for Atmel's Broadband Data Conversion product line. "This ADC is the first of a new high-resolution family and reaffirms Atmel's commitment to pushing the state-of-the-art in terms of the speed/resolution compromise, enabling designers to lower system complexity and cost."

The AT84AS001TP is available in a TBGA192 plastic package and will be offered in both commercial and industrial temperature ranges. Samples are available now, with production quantities in Q4 2006, at a unit price of $98 for a 1K-piece quantity in commercial grade.

About Atmel
Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions. Focused on consumer, industrial, security, communications, computing and automotive markets, Atmel ICs can be found Everywhere You Are(R).

(C) Atmel Corporation 2006. All rights reserved. Atmel(R), logo and combinations thereof, Everywhere You Are(R) and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

Information
Further information on the AT84AS001TP can be found at: http://www.atmel.com/dyn/products/product_card.asp?part_id=3885

For more information on Atmel's Broadband Data Conversion products go to: http://www.atmel.com/products/Broadband/overview.asp

CONTACT: Sylvie Mattei, Communications Manager of Atmel Grenoble, +33 4 76 58 30 25 or sylvie.mattei@gfo.atmel.com

More from Communication Systems & Equipment

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers