Receive industry and products news from the market categories that matter to you most.
Stay up to date on industry news and trends, product announcements and the latest innovations.
HI releases 4 updated ANSI/HI pump standards.
Press Release Summary:
Dec 30, 2014 - Available from HI's redesigned eStore, updated publications include: ANSI/HI 1.1-1.2-2014 Rotodynamic Centrifugal Pumps for Nomenclature and Definitions; ANSI/HI 2.1-2.2-2014 Rotodynamic Vertical Pumps of Radial, Mixed, and Axial Flow Types for Nomenclature and Definitions; ANSI/HI 1.4-2014 Rotodynamic Centrifugal Pumps for Manuals Describing Installation, Operation, and Maintenance; and ANSI/HI 2.4-2014 Rotodynamic Vertical Pumps for Manuals Describing Installation, Operation, and maintenance.
Original Press Release
Hydraulic Institute Ends 2014 with Release of Four Updated ANSI/HI Pump Standards
Press release date: Dec 19, 2014
Rotodynamic Centrifugal Pumps for Nomenclature and Definitions (ANSI/HI 1.1-1.2-2014) covers rotodynamic pumps with centrifugal (radial), mixed flow, and axial flow impellers, as well as regenerative turbine and Pitot tube type pumps, of all industrial/commercial types except vertically suspended diffuser turbine pumps. It contains description of types, nomenclature, and definitions. Available here: http://estore.pumps.org/Rotodynamic-Centrifugal-Pumps-for-Nomenclature-and-Definitions-ANSIHI-11-12-2014-secure-PDF-P624.aspx
Rotodynamic Vertical Pumps of Radial, Mixed, and Axial Flow Types for Nomenclature and Definitions (ANSI/HI 2.1-2.2-2014) standard is for types, nomenclature, and definitions of vertical turbine, mixed flow, axial flow vertical diffuser, submersible motor deep-well and short-set pumps, commonly defined as vertically suspended rotor types VS0,VS1, VS2, VS3, VS6, VS7, and VS8, as well as vertical overhung impeller types VS4 and VS5 that are driven by vertical electric motors or horizontal engines with right-angle gears. Available here: http://estore.pumps.org/Rotodynamic-Vertical-Pumps-of-Radial-Mixed-and-Axial-Flow-Types-for-Nomenclature-and-Definitions-ANSIHI-21-22-P576.aspx
Rotodynamic Centrifugal Pumps for Manuals Describing Installation, Operation, and Maintenance (ANSI/HI 1.4-2014) standard applies to Installation, Operation and Maintenance manuals for rotodynamic centrifugal pumps, including the following: Overhung impeller, rigidly coupled pumps (OH4), Close-coupled pumps (OH5, OH5A, OH6, OH7, OH8A, and OH8B), Horizontal, flexibly coupled, axial flow, single stage, overhung design (OH00), Overhung impeller, separately coupled pumps (OH0, OH1, OH1A, OH2, OH3, and OH3A), Sealless centrifugal pumps (OH9, OH10, OH11, and OH12), Between-bearing, separately coupled, one- and two-stage pumps (BB1 and BB2), Between-bearing, separately coupled, multistage pumps (BB3, BB4, and BB5), Vertically suspended, separate discharge (sump), volute style (VS4 and VS5), Regenerative turbine pumps (RT1, RT2, RT3, and RT4), Special-effects pumps (Pitot tube, etc.) Available here: http://estore.pumps.org/Rotodynamic-Centrifugal-Pumps-for-Manuals-Describing-Installation-Operation-and-Maintenance-ANSIHI-14-P574.aspx
Rotodynamic Vertical Pumps for Manuals Describing Installation, Operation, and maintenance (ANSI/HI 2.4-2014) standard applies to Installation, Operation and Maintenance manuals for rotodynamic (vertical) pumps including the following: Vertical, axial flow, lineshaft (VS3), Vertical, diffuser, deep well (VS1), Vertical, diffuser, short set (VS1), Vertical, diffuser, can-mounted (VS6), Vertical, diffuser, submersible, deep well (VS0), Vertical, diffuser, submersible, short set (VS0), Vertical, diffuser, double casing, in-line, floor mounted (VS8), Vertical, volute, double suction, wet pit (VS2), Vertical, volute, double suction, can type (VS7), Vertical, volute, multistage axial split, can type (VS7a), Vertical, sump, lineshaft (VS4), Vertical, sump, cantilever (VS5). Available here: http://estore.pumps.org/Rotodynamic-Vertical-Pumps-for-Manuals-Describing-Installation-Operation-and-Maintenance-ANSIHI-24-P577.aspx
HI Pump Standards are reliable, widely accepted references for anyone involved in pumps, including users, consultants, contractors, construction firms, manufacturers of pumps, seals, motors, instrumentation, controls, and pump software developers and systems integrators. HI periodically introduces new Standards based on industry needs. The three new Standards, along with HI’s complete library of ANSI Standards for the pump industry, are user-friendly, and available in both electronic and print formats in the HI eStore or by calling the Hydraulic Institute’s purchasing line at: 973. 267. 9700 Ext 118.
About the Hydraulic Institute: The mission of the Hydraulic Institute is to be a value-adding resource to member companies, engineering consulting firms, and pump users worldwide by developing and delivering comprehensive industry standards, expanding knowledge by providing education and tools for the effective application, testing, installation, operation, maintenance, and performance optimization of pumps and pumping systems, and by serving as a forum for the exchange of industry information. For more information on the Hydraulic Institute, its member companies and its Standards Partners, visit www.Pumps.org.
Don't miss the latest news!