Opto 22
Temecula, CA 92590

New groov GRV-R7-MM1001-10 RIO Input/Output (I/O) is UL Approved and ATEX Compliant
Offers 8 multi-signal, multifunction channels supporting analog input sensing, temperature sensing, discrete input sensing, analog output and discrete output. Features 2 mechanical Form C relays that supports open or normally-closed circuits. Comes with dual switched gigabit ethernet network interface and has operating temperature from -20 to 70 °C.
Read More »
Latest EPIC Firmware 1.5.0 Software Supports CAN Bus Integration Module
Features visualization and external mass storage support. Allows USB file access for PAC Control, CODESYS, Node-RED, and groov Manage,. Offers upgrade to Node-RED 1.0.2, including editor, search, and core node enhancements.
Read More »
New Two I/O Modules Feature Spring-clamp Field Wiring Terminals
GRV-ITM-12 provides a high-density, low-cost temperature sensing option with two isolated zones and 6 channels per zone. Accurate to 0.1% of the configured range over 20-bit resolution for V/mV sensing with accuracy ranging from 2.0-5.0 °C for thermocouple sensing. GRV-CCANI-2 supports integrating CAN data into control applications using IEC 61131-3 languages.
Read More »
New groov EPIC I/O Modules from Opto 22 are UL Listed and ATEX Compliant
Available in GRV-IDCSW-12, GRV-IRTD-8, and GRV-IVI-12 models and designed for mixed signal types, signal isolation, and channel density. Comes with two-position, hinged LED module cover, touch-sensitive pad and removable top-mounted connector. Operating temperature ranging from –20 to +70 °C and suitable for meeting precise requirements for temperature control applications.
Read More »
Updated groov EPIC Programmable Industrial Controller is IEC 61131-3 Compliant
Offers virtual private network client technology to connect to OpenVPN-based VPN server that creates secure data communication architectures with geographically dispersed systems. Users can choose between Inductive Automation’s® Ignition Edge® or the full Ignition platform that suites to their application. Features diagnostic and troubleshooting tools for testing network connectivity that...
Read More »
Opto 22 Releases the groov EPIC Learning Center for Hands-On Training
Opto 22 has announced the groov EPIC Learning Center. The hardware and software benchtop system is for learning and development and allows engineers, technicians and developers program many aspects of their groov systems. It is ideal for Opto 22's self-guided EPIC learning modules and has two seats for on-site training. The hardware includes a processor, power supplies, four0positiion...
Read More »
Opto 22's groov EPIC Edge Programmable Industrial Controller Adds IEC 61131-3 Programming Options Using a Variety of Languages
IEC 61131-3 standard languages supported include function block diagram (FBD), structured text (ST), sequential function charts (SFC) and ladder diagram (LD). Engineers can mix and match several software tools to build control and IIoT solutions on one unified platform. Programmed using Opto 22’s native PAC Control™, field-proven and flowchart-based PAC control with optional scripting offers...
Read More »New Module Released Featuring Four Serial Ports
The GRV-CSERI-4 from Opto 22 is a new module released for its groov EPIC chassis. The module features four serial ports for communications between the controller and multiple serial devices. It can operate in temperatures from -20 to 70 degrees Celsius and it is hot swappable, meaning it can either be installed or removed without turning off the unit or stopping control. The GRV-CSERI-4 also has...
Read More »
New PAC Project Software Suite R10 is Enhanced with Eight Control Commands
PAC Project Software Suite R10 incorporates real-time control, HMI and data handling functionalities. The software enable user to designate individual I/O and variable tags for use in IIoT data communications. SNAP PAC are programmed using software suite. PAC software comes with OPC server, database connectivity, PC-based control configuration, more than 450 commands in English, graphical PID...
Read More »
Opto 22 groov EPIC® system offers I/O module density of up to 24 channels per module.
Enabling automation engineers solve automation and industrial internet of things (IIoT) problems, Opto 22 groov EPIC® system combines I/O, control, data processing, and visualization to cypher such challenges. UL Hazardous Locations approved and ATEX compliant, unit features 2 GB RAM, 6 GB user space, high-resolution color touchscreen with HDMI output, remote configuration and troubleshooting...
Read More »
New groov GRV-R7-MM1001-10 RIO Input/Output (I/O) is UL Approved and ATEX Compliant
Offers 8 multi-signal, multifunction channels supporting analog input sensing, temperature sensing, discrete input sensing, analog output and discrete output. Features 2 mechanical Form C relays that supports open or normally-closed circuits. Comes with dual switched gigabit ethernet network interface and has operating temperature from -20 to 70 °C.
Read More »
Latest EPIC Firmware 1.5.0 Software Supports CAN Bus Integration Module
Features visualization and external mass storage support. Allows USB file access for PAC Control, CODESYS, Node-RED, and groov Manage,. Offers upgrade to Node-RED 1.0.2, including editor, search, and core node enhancements.
Read More »
New Two I/O Modules Feature Spring-clamp Field Wiring Terminals
GRV-ITM-12 provides a high-density, low-cost temperature sensing option with two isolated zones and 6 channels per zone. Accurate to 0.1% of the configured range over 20-bit resolution for V/mV sensing with accuracy ranging from 2.0-5.0 °C for thermocouple sensing. GRV-CCANI-2 supports integrating CAN data into control applications using IEC 61131-3 languages.
Read More »
New groov EPIC I/O Modules from Opto 22 are UL Listed and ATEX Compliant
Available in GRV-IDCSW-12, GRV-IRTD-8, and GRV-IVI-12 models and designed for mixed signal types, signal isolation, and channel density. Comes with two-position, hinged LED module cover, touch-sensitive pad and removable top-mounted connector. Operating temperature ranging from –20 to +70 °C and suitable for meeting precise requirements for temperature control applications.
Read More »
Updated groov EPIC Programmable Industrial Controller is IEC 61131-3 Compliant
Offers virtual private network client technology to connect to OpenVPN-based VPN server that creates secure data communication architectures with geographically dispersed systems. Users can choose between Inductive Automation’s® Ignition Edge® or the full Ignition platform that suites to their application. Features diagnostic and troubleshooting tools for testing network connectivity that...
Read More »Opto 22 announces new Director of Technical Marketing
Josh Eastburn brings experience in process automation and system integration to his new position as Director of Technical Marketing. Temecula, CA - August 20, 2019 – Industrial automation and industrial internet of things (IIoT) manufacturer Opto 22 today named Josh Eastburn as Director of Technical Marketing. In this position, Eastburn will lead the creation of useful and engaging customer...
Read More »Opto 22 Releases groov EPIC White Paper
New white paper shows how an edge programmable industrial controller can simplify, reduce costs, and increase security for IIoT and other data-intensive applications Temecula, CA - May 7, 2019 – Opto 22 announces the release of a new white paper, “Meet the Future: EdgeProgrammable Industrial Controllers,” which discusses how controls engineers can meet today's demands for...
Read More »
Opto 22 Releases the groov EPIC Learning Center for Hands-On Training
Opto 22 has announced the groov EPIC Learning Center. The hardware and software benchtop system is for learning and development and allows engineers, technicians and developers program many aspects of their groov systems. It is ideal for Opto 22's self-guided EPIC learning modules and has two seats for on-site training. The hardware includes a processor, power supplies, four0positiion...
Read More »
Opto 22's groov EPIC Edge Programmable Industrial Controller Adds IEC 61131-3 Programming Options Using a Variety of Languages
IEC 61131-3 standard languages supported include function block diagram (FBD), structured text (ST), sequential function charts (SFC) and ladder diagram (LD). Engineers can mix and match several software tools to build control and IIoT solutions on one unified platform. Programmed using Opto 22’s native PAC Control™, field-proven and flowchart-based PAC control with optional scripting offers...
Read More »New Module Released Featuring Four Serial Ports
The GRV-CSERI-4 from Opto 22 is a new module released for its groov EPIC chassis. The module features four serial ports for communications between the controller and multiple serial devices. It can operate in temperatures from -20 to 70 degrees Celsius and it is hot swappable, meaning it can either be installed or removed without turning off the unit or stopping control. The GRV-CSERI-4 also has...
Read More »