Company News


133 Peachtree St., N.E., Atlanta, GA, 30303, USA

  • 800-456-3504

Latest New Product News from

Green & Clean, Non-Industrial Products

Interfolded 2-Ply Napkin improves foodservice consumer experience.

May 23, 2016

Soft, large, strong, and absorbent, Dixie Ultra® Interfold 2-Ply Napkin improves foodservice patron experience while also minimize waste. This Green Seal™ approved product, included amongst EcoSmart™ products made from 100% recycled fiber, is also part of system that includes one-at-a-time style dispensers that reduce waste and facilitate maintenance/refilling. Read More

Architectural and Civil Engineering Products

Sheathing with WRB-AB accelerates exterior wall installation.

Mar 18, 2016

By integrating water-resistive and air barrier (WRB-AB) directly into gypsum sheathing panel core, DensElement™ Barrier System with AquaKOR™ Technology reduces time needed to install exterior walls in commercial construction. This all-in-one sheathing system, which exhibits vapor permeability that helps mitigate moisture issues in wall cavity, can be sealed with PROSOCO R-Guard® FastFlash®... Read More

Architectural and Civil Engineering Products, Safety & Security Equipment

Air/Water Barrier System eliminates need for house wrap.

Feb 18, 2016

Used to keep potentially harmful water out of structure during construction, ForceField™ consists of engineered wood sheathing panels laminated with air and water barrier. Panel joints are taped with seam tape once wall sheathing is installed on structure to help prevent air infiltration and leaks. Available in 7/16 CAT thickness and sizes of 4x8, 4x9, and 4x10 sizes, panels install akin to... Read More

Material Handling & Storage

Toilet Tissue Dispenser neutralizes restroom odors.

Oct 26, 2015

Using motion sensing technology, Compact® with ActiveAire™ Tissue Dispenser neutralizes odors at source (inside stalls) to improve washroom experience. Scent emission is activated when occupant enters stall, and occupant can elicit extra burst of scent by waving their hand. Allowing sustained release over course of 30 days, fan gently blows air across fragrance refills that do not contain... Read More

Materials & Material Processing

Dry Emulsifiers have minimal resistance to flow.

Dec 04, 2014

Supplied in 25 lb bags, XPLOR™ Dry Emulsifiers are suitable for diesel, mineral oil, and synthetic-based drilling fluids. They are compatible with variety of solvents, allow for precise dosing, and eliminate drum transportation, cleaning, and disposal costs. Since emulsifiers have minimal resistance to flow, even at temperatures below freezing, they are easier to work with in cold climates than... Read More

Green & Clean, Materials & Material Processing

Printing Paper comes in 3 versions to suit document type.

Aug 29, 2013

Spectrum® business communication papers include Standard, Premium, and Super Premium categories. For printing copies, drafts, and emails, Standard multipurpose papers come in 92 and 96 Bright options and 30% and 100% Recycled Content options. Premium inkjet and laser papers, with extra thickness for important documents, come in 92 and 96 Bright options. Super Premium inkjet and laser paper... Read More

Architectural and Civil Engineering Products, Materials & Material Processing

Roof Boards support uniform adhesive application.

Feb 04, 2013

Providing mold and fire resistance, DensDeck® Prime Roof Boards offer strong bond with solvent-based adhesives, allowing adhesives to be applied evenly and uniformly. Face mat overlaps onto backside of board, providing clean joint and overall smooth and uniform appearance when membrane is laid over cover board. Available in ½ and 5/8 in., fiberglass mat gypsum roof boards produce minimal dust... Read More

Architectural and Civil Engineering Products

Gypsum Panels are optimized for surface durability.

Jan 05, 2009

Used in construction of high-occupancy buildings, Dens(TM) DensArmor Plus® interior panels contain embedded fiberglass mesh to provide impact and abuse resistance. They achieve level 3 for surface abrasion and soft body impact testing (ASTM C 1629) as well as level 2 for hard body impact resistance and level 1 for indentation resistance. Installed with standard drywall tools and fasteners,... Read More

Architectural and Civil Engineering Products

Wall Sheathing eliminates need to install building wrap.

Feb 20, 2008

Nautilus(TM) OSB panels have pre-applied weather-resistant barrier that eliminates need for separate building wrap installation. By combining sheathing and building wrap, product promotes process efficiency for builders and contractors. These code-compliant panels can also resist rain and moisture during construction period. When seams are sealed with code-compliant Nautilus 3 in. wide seam tape,... Read More

Architectural and Civil Engineering Products

Fiberglass Mat Gypsum Sheathing withstands prolonged exposure.

Jan 23, 2008

Tested in accordance with ASTM E 330, DensGlass Gold® is suited for architects and builders concerned about construction schedules that might be delayed by adverse weather conditions. Exterior sheathing withstands winds in excess of 155 mph (Category 5 hurricane) and exhibits resistance to moisture and mold during and after construction. Mats facilitate handling of DensGlass Gold and also reduce... Read More

Architectural and Civil Engineering Products

I-Joist features pre-cut holes to aid installation.

Aug 28, 2007

Capable of supporting roof loads over large open spaces and high ceilings, XJ 85(TM) Wood I Beam(TM) joist offers strategically placed openings through which builders and contractors can install plumbing, HVAC, and electrical systems. Pre-cut holes facilitate installation while reducing waste at jobsite. Resistant to shrinking, twisting, and warping, prefabricated I-joist does not employ any... Read More

Architectural and Civil Engineering Products

Plywood Sub-Floor has water-repellent coating.

Feb 15, 2007

Plytanium® DryPly(TM) plywood is suited for residential builders interested in protecting sub-floors before roof and exterior walls go up during initial stages of construction. With water-repellent coating, plywood is protected against rain- and moisture-related problems such as delamination, edge swell, and joint sanding. Read More

Architectural and Civil Engineering Products

Interior Wallboard offers moisture and mold resistance.

Jan 17, 2005

DensArmor(TM) Plus Paperless Wallboard features glass mat facing that finishes like paper-faced wallboard. Core is also reinforced with inorganic glass fibers for long-term durability and dimensional stability. Read More

Architectural and Civil Engineering Products

Structural Wall Sheathing comes in in. thickness.

Jul 28, 2004

DensGlass Silver(TM) exterior gypsum wall sheathing resists moisture and mold in residential applications. It features glass mats on front and back of board along with moisture-resistant core. Product can be used as wall sheathing over steel or wood framing up to 24 in. on center. Almost any cladding, including composition, stone, metal, brick, wood, stucco and plywood siding, can be applied over... Read More

Architectural and Civil Engineering Products

Shaft Liner features gold-colored mat surface.

Jul 28, 2004

DensGlass® Ultra Shaftliner(TM) consists of moisture-resistant, noncombustible 1 in. gypsum core with coated glass mat face and back. It resists growth of mold that can occur from exposure to wet weather during construction. Suited for vertical and horizontal shaft wall assemblies, as well as stairwell and area separation wall applications, product achieves 2 hr fire endurance rating in... Read More

Architectural and Civil Engineering Products

Vinyl Siding suits specialty applications.

Feb 25, 2004

Board and Batten Vinyl Siding provides emphasis as accent panel or full exterior coverage. Wood grain finish gives it look of painted wood, while color-through technology minimizes scratches. Siding has .048 in. panel thickness with 5.5 in. face, 1.5 in. batten, and .5 in. projection. Nine colors are available. Decorative corner starter system provides structural and aesthetic compliment to vinyl... Read More

Architectural and Civil Engineering Products, Mounting & Attaching Products, Non-Industrial Products

Perforated Hardboard Panels provide additional storage.

Jul 21, 2003

Clutter Cutter® panels support shelves, bins, and individual tools and utensils, keeping frequently used items within reach and less often used tools out of the way and organized. Installed with glue nailing over ¾ in. furring strips, panels require solid framing on all edges; intermediate framing must be spaced 16 in. o.c. or less. They can be cut to size and shape with woodworking tools.... Read More

Architectural and Civil Engineering Products

Interior Gypsum Board provides mold- and abuse-resistance.

Jul 09, 2003

Measuring 5/8 in. thick, DensArmor(TM) Abuse Guard(TM) Fireguard® incorporates coated glass mat surface on back of panel that provides protection from incidental moisture in wall cavity. Panel face consists of heavy-duty, abrasion-resistant paper. Product meets criteria for Type X and may be used in any assembly where Type X wallboard is specified. Product provides durability and fire protection... Read More

Architectural and Civil Engineering Products

Interior Gypsum Panel resists mold and mildew growth.

May 15, 2003

DensArmor(TM) uses proprietary Dens Technology and consists of noncombustible gypsum core with coated glass mat on back and smooth, heavy-duty paper on face. DensArmor(TM) Plus interior panel employs noncombustible gypsum core reinforced with inorganic glass fibers and coated glass mat facings on face and back of board. It resists warping, rippling, and buckling and exhibits zero flame spread.... Read More

Other Company News from

Feb 24, 2012

Sep 28, 2011