New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Texas Instruments

Computer Hardware & Peripherals

Low Power Digital Signal Processors offer 16-bit solution for portable devices.

Model TMS320C5514 DSPs feature 3 LDOs, 1 each for DSP core, USB, and analog subsystems; SDRAM and mobile SDRAM support; up to 256 KB memory; and USB 2.0, I2S, UART, SPI, MMC/SD, and GPIOs. With up to 320 KB total memory, TMS320C5515 DSPs offer up to 1,024-point programmable FFT hardware accelerator, LCD display controller, and 10-bit 4-channel SAR ADC. Both products operate at up to 120 MHz and...

Read More »
Agricultural & Farming Products

TI's New C2000(TM) ControlSUITE(TM) Software Provides Comprehensive Development Package to Accelerate Each Design Stage of Real-Time Control Applications

Royalty-free software examples, libraries, application solutions and support are rooted in TI's 15+ years of real-time control systems engineering HOUSTON -- Responding to the demand for more intuitive, easy-to-use software throughout every design stage, Texas Instruments Incorporated (TI) (NYSE:TXN) today announced controlSUITE software for its TMS320C2000(TM) microcontrollers (MCUs) that enable...

Read More »
Development Platform accelerates eBook market introduction.
Architectural & Civil Engineering Products

Development Platform accelerates eBook market introduction.

Supplied with electrophoretic display, eBook development platform leverages 45 nm OMAP(TM) 3621 processor that supports applications which exercise CPU, multimedia, and graphics engines. It features TPS6518x electronic paper display (EPD) power management IC and allows 14,800+ page turns on 6 in. E Ink screen using 600 mAh battery. Additional features include WiLink(TM) 6.0 WiFi/Bluetooth-®/FM...

Read More »

Power MOSFETs exhibit reduced top-side thermal impedance.

Supplied in SON package with 5 x 6 mm footprint, DualCool(TM) NexFET(TM) devices dissipate heat through top of package for high-current DC/DC applications. Each single-phase, 35 A synchronous buck converter MOSFET features packaging technology that reduces thermal impedance to top of package to 1.2-°C/W. Dual-side heat sinking enables up to 50% more current through FET, allowing use with...

Read More »
Communication Systems & Equipment

Class-D Audio Amplifiers target home entertainment systems.

Providing 300 W stereo or 600 W mono output power at greater than 88% efficiency, Models TAS5630 and TAS5631 are available in analog-input and PWM-input configurations, respectively. THD of 0.03% at 1 W into 4 W load provides ultra-low distortion at normal listening levels. With PurePath HD technology and audio bandwidth exceeding 73 kHz, units can achieve high-definition media playback in AV and...

Read More »
Electrical Equipment & Systems

Integrated Load Switch features low ON resistance.

Providing typical ON resistance of 5.7 mW at 3.6 V, Model TPS22924C comes in 1.4 x 0.9 mm chip scale package, addressing space-constrained, battery-powered applications. Unit features input voltage range of 0.75-3.6 V, maximum continuous switch current of 2 A, and shutdown current of less than 2 -µA. Applications include media players, point-of-sale terminals, GPS systems, netbooks/notebooks,...

Read More »
Communication Systems & Equipment

JFET-Input Op Amps offer fast slew rates.

Offered in VSON-8 or SOT23-5 packages, OPA653/OPA659 combine wideband voltage feedback amplifier with JFET-input stage and meet requirements for frequency domain and FFT analysis due to their respective signal bandwidths of 475 and 575 MHz and THD ratings of -60 and -66 dBc @ 100 MHz. Optimal pulse response is due to respective 2,675 and 2,550 V/-µs slew rates of fixed gain (+2 V/V) OPA653 and...

Read More »
Electrical Equipment & Systems

High-speed 14-bit ADCs deliver low-power operation.

ADS4149 consumes as little as 275 mW per channel at 250 MS/sec while offering 72.5 -dB SNR at 100 MHz input frequency. Dynamic power scaling reduces power consumption to 215 mW at 160 MS/sec, and 1-6 -dB programmable gain option provides flexibility to trade off between SNR and spurious free dynamic range with lowered input voltage swing. Optional buffered analog input provides constant input...

Read More »
Electrical Equipment & Systems

Sine-to-Sine Wave Clock Buffer conserves board space.

Supplied in 1.6 x 2.0 mm-footprint WCSP, 4-channel CDC3S04 can replace up to 3 individual same-frequency TCXOs and is suited for mobile applications. It distributes sine-wave signals to as many as 4 different peripherals while adding negligible phase-noise, minimizing EMI. Built-in I-²C interface gives real-time control for outputs, polarity, and internal coding, while integrated on-chip LDO...

Read More »

All Topics