Company News

Dynabrade, Inc.

8989 Sheridan Dr., Clarence, NY, 14031, USA

  • 800-828-7333

Latest New Product News from
Dynabrade, Inc.

Machinery & Machining Tools

Dynafile Abrasive Belt Machine weighs 3 lbs.

Dec 19, 2017

Dynafile Abrasive Belt Machine is used to grind and deburrs materials such as metal, plastic and fiberglass. Unit uses coated abrasive belts ½ in., ¼ in. or 1/8 in. wide x 24 in. long. Product offers speed of 20,000 RPM and is equipped with air motor. Belt machine features American flag design and comes in composite housing. This equipment comes with accessories such as coated, non-woven... Read More

Machinery & Machining Tools, Portable Tools

Random Orbital Sanders are equipped with 12,000 RPM motor.

May 25, 2017

Available in 5 in., 6 in. diameter and non-vacuum and central vacuum models, Random Orbital Sanders are designed ergonomically with tactile soft grip overmold. Units feature 3/16 in. and 3/32 in. diameter orbit for sanding and ultra-fine sanding applications respectively. Product’s motor comes with V Seal which protects bearing from contamination.

Read More

Machinery & Machining Tools, Portable Tools

Abrasive Belt Tool extends operation in inaccessible areas.

Jul 12, 2016

Used for deburring, blending, and cleaning, Dynapoint II runs 7 in. long abrasive cartridge rolls that reduce downtime associated with frequent changeout. This air-powered abrasive belt machine, running at 20,000 rpm, offers max reach of 3 ½ in. that is suited for diverse industry use. Available in grits from 50–120, abrasives are hand-tightened for accelerated and simple adjustments.... Read More

Machinery & Machining Tools, Portable Tools

Industrial Abrasive Power Tools serve automotive applications.

Dec 09, 2015

National Detroit Legacy Series Air Tools include 5 and 6 in. dia DAQ Dual-Action Sanders for sanding filer and primer, removing rust and scale, and featheredging. Offered in same diameters, ELZ Dual-Action Sanders suit fine finishing, drop and base coat sanding, and polishing operations. At 800 rpm, 8 in. dia Gear-Driven Sander suits stock removal, leveling, paint removal, and body filler... Read More

Machinery & Machining Tools, Portable Tools

Die Grinders offer 3 in. or 6 in. shaft for extended reach.

Sep 04, 2015

Available with front or rear exhaust air motor, .4 Hp Extension Die Grinders run at 25,000 rpm and are suited for work within long pipes, castings, and other places where extended reach is needed. Straight-line air tools include safety-lock lever that prevents accidental start up. To minimize noise in workplace, tools run as low as 72 dB(A). Optional carbide burrs and mounted points enable... Read More

Machinery & Machining Tools

Air Powered Pipe Belt Finisher meets diverse application needs.

Feb 11, 2015

Utilizing .7 hp air motor, Pipe Belt Finisher runs at 3,400 rpm, uses ½–1½ in. wide x 30 in. long abrasive belts, and allows 180° of work piece abrasive capture at any time. Abrasive belt slack allows use on various sizes of pipe, and tension arm accelerates changing of both coated and non-woven belts. To increase operator comfort, belt housing and side handle are adjustable. Tool is suited... Read More

Portable Tools

Disc Sander features 2-hand design for optimal comfort.

Feb 25, 2014

Equipped with .7 hp governor-controlled, gearless air motor, Pistol Grip Disc Sander is available in either 8,000 or 11,000 rpm. Tool includes Disc Pad Assembly for center-hole abrasive discs ranging from 4 ½–5 in. in diameter. Sander also features removable side handle and rubber overmold on housing, minimizing tool vibration and eliminating cold air transmission to operator's hands. Weighing... Read More

Machinery & Machining Tools, Portable Tools

Air-Powered Pencil Grinder features variable speed design.

Jan 29, 2014

Providing adjustable speed from 35,000–60,000 rpm, Variable Speed Pencil Grinder offers precision deburring, finishing, and engraving. Tool features non-slip ergonomic grip, one-touch pushbutton for on/off operation, and overhose assembly that helps direct air away from operator. Spindle Lock with through-hole enables quick accessory change with no need for 2 wrenches. Supplied with 1/8 in.... Read More

Mounting & Attaching Products, Portable Tools

Combination Sander-Buffer features palm-style design.

May 01, 2013

Weighing 1.5 lb, Combination Sander/Buffer allows dual-purpose Random Orbital Sanding and Rotary Polishing. Air tool can switch from 3/16 in. random orbital pattern to fixed rotary mode with turn of switch. In orbital sander mode, 3 in. diameter tool is suitable for use on contoured surfaces and tight areas. As rotary buffer, tool runs at 12,000 rpm free speed, then slows to 4,000 rpm while in... Read More

Machinery & Machining Tools, Portable Tools

Vertical Sanders and Grinders serve heavy-duty applications.

Jan 17, 2013

Available in 2 and 3 hp versions, 7 in. Diameter Vertical Depressed Center Wheel Grinders (6,000, 7,200, or 8,500 rpm) and 6 in. Diameter Vertical Cup Wheel Grinder (6,000 rpm) are suited for heavy deburring as well as fast weld and stock removal. Also available in 2 and 3 hp variants, 7 in. Diameter Vertical Disc Sanders run at 6,000, 7,200, or 8,500 rpm and are suited for grinding sheet... Read More

Material Handling & Storage

Downdraft Table captures metal grinding particles in water.

Jun 13, 2012

Offering wet filtration system, Metal Capture Downdraft Table minimizes flammability of materials in workplace while grinding by capturing potentially combustible filings and dust in air/water mixing zone. Material is then deposed of as slurry. Featuring 12-gauge construction, table has 42-gallon capacity and working area of 36 x 60 in. to accommodate large workpieces. System includes casters for... Read More

Labels Tags Signage & Equipment, Machinery & Machining Tools, Portable Tools

Engraving and Deburring Tool is air powered.

Sep 22, 2011

Operating at 14,000 strokes/min, DynaPen Series features one-touch on/off button and 6 ft air line that swivels 360° for maneuverability, especially useful when working on contoured parts. In-line filter prevents debris from entering tool from air line. Available with 1/8 in. or 3 mm collet insert, DynaPen Series is suited for use on plastics, composites, steel, aluminum, and other materials... Read More

Machinery & Machining Tools

Air Powered Drills come in variety of configurations.

May 26, 2010

With speeds of 500, 1,000, 2,400, 3,600, 5,500, and 20,000 rpm, .4 hp Pistol Grip Drills feature ¼ chuck, air motor, and finger platforms on both sides for stability and support. Angle Head Drills, also rated at .4 hp, are 11 in. long and provide speeds of 950 and 3,200 rpm. Designed to connect to central vacuum systems, Vacuum Drills include vacuum shroud, which compresses around drill bit to... Read More

Machinery & Machining Tools

Electric Rotary Polisher incorporates rotating handle.

Mar 26, 2010

Able to be used on variety of surfaces, Electric Rotary Polisher utilizes 120 V, 11 A motor and rotary motion for cutting, polishing, and buffing using compounds. Trigger handle rotates 180° to any position for operator comfort, while rubberized side handle further increases comfort and control. Operating at 3,000 rpm max, tool offers variable speed trigger, lockable speed, and double insulated... Read More

Machinery & Machining Tools, Portable Tools

Disc Sanders integrate contaminant-capturing vacuum shroud.

Jan 14, 2010

Used for material removal on non-ferrous surfaces, 3 in. Diameter Vacuum Disc Sanders come in models ready to hook up to self-generated or central vacuum exhaust systems. Constructed of clear urethane, flexible vacuum shroud captures dust, debris, and contaminants as air tool is sanding to promote cleaner, safer workplace. View port in shroud lets operator see edge of sanding disc and optimizes... Read More

Machinery & Machining Tools

Air-Powered Die Grinders feature steel housing.

Dec 02, 2009

Suited for heavy-duty applications, Die Grinders are available with .5 or .7 hp air motors. Each tool features rubber grip housing to insulate operator from vibration and cold air transmission, and ¼ in. collet that can be changed to 3/8 or 1/8 in. collet with available inserts. Offered in front and rear exhaust designs, Die Grinders provide speeds to 20,000 or 24,000 rpm. Rear exhaust models... Read More

Machinery & Machining Tools

Die Grinders offer variety of configuration options.

Sep 23, 2009

Used for precision grinding, deburring, and blending on variety of materials, .4 hp Die Grinders are rated from 950-30,000 rpm and available with different size collets and collet inserts. Composite overmold housing reduces tool vibration and cold air transmission to operator, while muffler reduces sound levels in workplace. Geared and gearless air tools come with straight line, right-angle, or... Read More

Portable Tools

Vacuum Disc Sanders capture contaminants at vacuum source.

Aug 26, 2009

Available in 2, 3, 5, and 7 in. diameters, Vacuum Disc Sanders allow for coating removal on non-ferrous surfaces such as carbon fiber, fiberglass, and painted aluminum with capture of contaminants to vacuum source. Right angle design features rubber over-mold on housing for minimized vibration to operator. In Self Generated models, tool's exhaust directs contaminants to portable self-contained... Read More

Machinery & Machining Tools, Portable Tools

Right Angle Disc Sander is optimized for power, performance.

Aug 12, 2009

Powered by 1.3 hp air motor that promotes smooth and controlled operation, Model 52657 may be used on various materials for sanding and deburring applications, surface conditioning, weld preparation, and removing paint/rust. Tool operates at 6,000 rpm and accepts 7 in. dia abrasive discs with 7/8 in. center hole. While vibration-dampening side handle is removable for left- or right-hand use,... Read More

Machinery & Machining Tools, Portable Tools

Air-Powered Descaling Tools suit heavy-duty applications.

May 28, 2009

Offered in 4 models, Dynascaler surface preparation tools power Roto Peen Bonded Flap Assemblies for removing rust, oxide, scale, old paint, and coatings. Straight Line and Right Angle models let operators work close to work surface and have 4-position top handle, while Floor model features 20-slot hub for Roto Peen Bonded Flaps and suits scaling operations along extended areas. Over-Under model... Read More

Other Company News from
Dynabrade, Inc.