Stay up to date on industry news and trends, product announcements and the latest innovations.
Latest New Product News from
CTC International, Inc.
Allowing non-stop production for rolls up to 36 in. diameter and weighing up to 900 lb, 800-PB-VF- 36 Semi-Automatic Splicer features turret design for easy roll lifting directly from floor. Designed with splice table pivots, PLC control and tape dispenser, unit’s splice prep signal tells operator when to load new roll. Using festoon feedback to pneumatic braking system, product offers... Read More
Featuring ergonomic design with turretting unwind management, Heat Seal Butt Splicer is suitable for nonwoven, packaging and converting applications. Featuring touchscreen interface, unit comes with cantilevered Turreting design. Product is equipped with standard PLC control and can be used for tapeless splicing of heat sealable materials.Read More
Designed with cantilevered roll loading, S-SSL-0630-PBR Splicer features auto registered splicing system for auto compensation of speed change. Featured with turetting unwind roll system, unit is capable for minimal roll lifting. With space saving design, unit’s splice mechanism is coupled with turreting unwind, allows for applying tape on same side of the web and is suitable for packaging,... Read More
CE-compliantÂ HSB-ACV-46 allows non-stop production via high-speed, automatic roll changes. Able to hold rolls of up to 47 in.Â diaÂ x 46 in.Â web width, machine produces clean butt splice with zero tail. This allows spliced part to be used in end product, while vector-driven unwind system allows splicing at low tensions for delicate materials. Along with touchscreen interface, features... Read More
Available in web widths from 10–24 in., S-TAB-50 Turretmaster Butt Splicer accommodates core I.D.'s ranging from 3–6 in. Machine provides automatic gapless splicing with 1 or 2 pieces of tape and shear cutting of both webs simultaneously on 7.5Â° angle. Different sized web festoon options enable splice speeds of 500 or 750 fpm. Additional features include shaftless roll lifting turret... Read More
Available in 8, 13, or 24 in.Â finished roll diameters, Spray N Tape series utilizes tail taping system for closing rolls with precision. Closure tape length can be varied to meet varied requirements, and virtually 100% of the labels on the completed roll can be used. Hot melt spray core glue attaches new web to cores, andÂ minimal application ofÂ light tach hot melt adhesiveÂ fosters... Read More
Replacing core glue pot with traversing nozzle, Programmable Spray Core Glue System applies glue to cores on rotating spindle. Stroke, beginning and end points of glue nozzle traverse are controlled through PLC. Equipped with large tank and pump supplying glue to applicator nozzle, system extends turret runs before having to add more glue. System can be programmed to provide gap in spray pattern... Read More
Compatible with such materials as tag, label, board, film stock, as well as other thick or double ply materials, Power Splice features heavy-duty, cantilevered unwind design that features integral roll lifting and can hold 2 full 40 in.Â dia rolls to accommodate roll prep at any time in splice sequence. Horizontal web accumulator, positioned on top of splicer, concentrates footprint, and vector... Read More
Model S-900AB-ACV, accommodating various web widths, line speeds, and other process requirements, can splice range of materials, including tag, label, board, film stocks, and other thick or double ply materials. Allowing new roll prep at any time in splice sequence, heavy-duty cantilevered unwind design has integral roll lifting and can hold 2 full 40 in. dia rolls. Additional features include... Read More
Featuring heavy-duty cantilevered unwind design, Model S-900AB-ACV is suitable for splicing variety of materials, including tag, label, board, film stocks, and other thick or double ply materials. Web accumulator is separate, and can be placed at left or right side of splicer, allowing machine to work in either direction with diversion roller change. Automatic gapless butt splicing of web with 2... Read More
Engineered for non-stop packaging and converting, CS1214 Splicer has clamshell mechanism that opens 90Â° into horizontal plane to provide flat work table for prep work. Dual unwind shafts for supply rolls are located at bottom of machine, and 36 in. length allows placement in space-restricted areas. Able to accommodate 2 full 14 in. dia rolls, machine also employs Splice-at-any-speed System to... Read More
Featuring integral roll lifting system that is supported using 2 heavy duty air cylinders, Model SHDL-900-EG edge guided constant tension stand is capable of lifting rolls exceeding 850 lb in weight. It has heavy-duty double end supported design and can handle variety of materials including tag, label, board, film, paper, foil, and other materials used in packaging and converting applications.... Read More
With ability to wind rolls up to 10 in. dia on core sizes ranging from 1-3 in. ID, VTR Turret Rewinder operates directly in line with press, providing single pass non-stop finished roll label production. Standard features include automatic core glue, automatic tail glue, doctor blade glue wheels, PLC control, automatic swing back core stop, and it requires no mechanical press connections. Turret... Read More
With ability to handle tag, label, board, film, paper, and foil materials, Model S-800C-DES-EG Edge Guided Constant Tension Unwind Stand unwinds rolls from removable air shaft supported at both ends by safety locking chucks. Featuring automatic edge guiding system, it is built with upper base that rides on lower base which is fitted with heavy duty rails. Tension control system consists of... Read More
Suitable for splicing wide range of materials including tag, label, board, film stocks, and other thick or double ply materials, Model S-900AB-ACV-EG automatic butt splicer features heavy-duty cantilevered unwind design that allows rolls as large as 48 in. dia to be accommodated. Web accumulator is separate piece which can be placed at left or right side of splicer, allowing it to work in either... Read More
Engineered for splicing variety of materials, including cable tapes used in coaxial cable production, cantilevered Model S-EBL-DSB-ACV always applies first tape to top side of web, without having to turret unwinding spindles. Splicer mechanism opens for splice preparation, and can be set up to provide overlap type splice. Unwind system is specifically designed to accommodate traverse wound spools... Read More
Other Company News from
CTC International, Inc.