Multi-Conveyor

Ultra Sanitary Trough Conveyor for Raw Dough...with 12 inch Incline!
Material Handling & Storage

Ultra Sanitary Trough Conveyor for Raw Dough...with 12 inch Incline!

Winneconne, WI - Multi-Conveyor (www.multi-conveyor.com) - Multi-Conveyor recently built this stainless steel welded, washdown sanitary trough conveyor to transport balls of bakery dough. The 6' long urethane belt conveyor feeds and discharges from existing conveyors. This particular section is SO SANITARY that we didn't even want to run demo product on the belt! This super clean trough...

Read More »
Split Conveyor 'Suspends' Product for Top and Bottom Print/Labeler
Material Handling & Storage

Split Conveyor 'Suspends' Product for Top and Bottom Print/Labeler

Winneconne, WI - Multi-Conveyor (www.multi-conveyor.com) -  Multi-Conveyor recently built a this unique stainless steel 3-A Dairy sanitary wash down welded conveyor, designed to transport plastic wrapped blocks of food in conjunction with a customer supplied starwheel top and bottom labeler.  See the YouTube link to this equipment below. The infeed conveyor actually splits while product is...

Read More »
New Flighted Conveyors Provide Consistent Incline When Sizes Vary
Material Handling & Storage

New Flighted Conveyors Provide Consistent Incline When Sizes Vary

The new sanitary flighted incline conveyor elevates inconsistently sized cuts of a raw food product on a homogeneous urethane belt. Also known as a Z-shaped incline, these conveyors are used when unpackaged, loose or bulk product needs to be inclined in a small footprint and/or cleanability is a concern. A take-up is located on each end of the system allowing the belt to move in a seamless...

Read More »
New First-in, First out FIFO 2-to-1 Merge Conveyor is Offered with Stainless Steel Welded Frame Design
Material Handling & Storage

New First-in, First out FIFO 2-to-1 Merge Conveyor is Offered with Stainless Steel Welded Frame Design

Equipped with PowerFlex 525 drives, pulse and photo-eye sensors, CompactLogix processor, servo motor controllers and VFD's. Features a virtual axis for measuring pocket length on the merging conveyor and generates pulse in specified inch increments of travel. Offered with continuous welds, stainless steel drives and drive mounts, stainless steel idle ends, washdown duty motors and reducers.

Read More »
Seven Foot (7') Side Grip Elevation Conveyor
Material Handling & Storage

Seven Foot (7') Side Grip Elevation Conveyor

Winneconne, WI - Multi-Conveyor (www.multi-conveyor.com) -  Multi-Conveyor recently built a mild steel, "S-style", side grip elevator - or "Gripper" - designed to transport filled, capped bottles of oil, to an over seven foot (7') elevation from infeed to discharge. Grippers are comprised of two parallel conveyors mounted side-by-side, with the Neoprene gripper bulb chains facing one...

Read More »
Multi-Conveyor Introduces Rotary Accumulation Table with a Washdown Grade Motor
Fluid & Gas Flow Equipment

Multi-Conveyor Introduces Rotary Accumulation Table with a Washdown Grade Motor

The new Rotary Accumulation Table is designed for bottle capper reject applications. The product features a 42 in. long straight running table top chain conveyor for accepting rejected bottles of a liquid food product that is to be dispensed onto 36 in. stainless steel rotary accumulation table. The rotary table is constructed of stainless steel with a mild-steel below mount motor assembly...

Read More »
New Overhead Plastic Chain Conveyor Comes with Rotary Spiral Accumulator
Material Handling & Storage

New Overhead Plastic Chain Conveyor Comes with Rotary Spiral Accumulator

The Overhead Plastic Chain Conveyor is constructed of stainless steel and is designed to feed a decline rotary drum spiral conveyor for various size glass jars. The unit accepts single file products from discharging de-palletizing machine. It allows the connection of multiple interconnected drum spirals for staging of high production lines. The spiral accumulators give the production line with...

Read More »
Multi-Conveyor Introduces Pet Food Conveyor with Narrow-Edge Leading Product Orientation
Material Handling & Storage

Multi-Conveyor Introduces Pet Food Conveyor with Narrow-Edge Leading Product Orientation

The Pet Food Conveyor is designed for individually wrapping pet food products. The unit utilizes vibration for settling and VFD’s for controlling speed throughout the process. It offers a speed (singulate) of 180 to 200 parts per minute. The conveyor’s vibration helps in the separation of individual pieces for single filling prior to a right angle transfer. It is equipped with a...

Read More »
Alpine Style Conveyor Reduces Downtown and Maximizes Production
Material Handling & Storage

Alpine Style Conveyor Reduces Downtown and Maximizes Production

The alpine style accumulation conveyor solution recently built from Multi-Conveyor was designed using a combination of both automation and space minimization. The conveyor is able to detect and accept various sizes of bottled salad dressings. It is controlled by photo-eyes and the machinery contains proximity switches, solenoids and filter regulators. The conveyor has the ability to smoothly move...

Read More »
Ultra Sanitary Trough Conveyor for Raw Dough...with 12 inch Incline!
Material Handling & Storage

Ultra Sanitary Trough Conveyor for Raw Dough...with 12 inch Incline!

Winneconne, WI - Multi-Conveyor (www.multi-conveyor.com) - Multi-Conveyor recently built this stainless steel welded, washdown sanitary trough conveyor to transport balls of bakery dough. The 6' long urethane belt conveyor feeds and discharges from existing conveyors. This particular section is SO SANITARY that we didn't even want to run demo product on the belt! This super clean trough...

Read More »
Split Conveyor 'Suspends' Product for Top and Bottom Print/Labeler
Material Handling & Storage

Split Conveyor 'Suspends' Product for Top and Bottom Print/Labeler

Winneconne, WI - Multi-Conveyor (www.multi-conveyor.com) -  Multi-Conveyor recently built a this unique stainless steel 3-A Dairy sanitary wash down welded conveyor, designed to transport plastic wrapped blocks of food in conjunction with a customer supplied starwheel top and bottom labeler.  See the YouTube link to this equipment below. The infeed conveyor actually splits while product is...

Read More »
New Flighted Conveyors Provide Consistent Incline When Sizes Vary
Material Handling & Storage

New Flighted Conveyors Provide Consistent Incline When Sizes Vary

The new sanitary flighted incline conveyor elevates inconsistently sized cuts of a raw food product on a homogeneous urethane belt. Also known as a Z-shaped incline, these conveyors are used when unpackaged, loose or bulk product needs to be inclined in a small footprint and/or cleanability is a concern. A take-up is located on each end of the system allowing the belt to move in a seamless...

Read More »
New First-in, First out FIFO 2-to-1 Merge Conveyor is Offered with Stainless Steel Welded Frame Design
Material Handling & Storage

New First-in, First out FIFO 2-to-1 Merge Conveyor is Offered with Stainless Steel Welded Frame Design

Equipped with PowerFlex 525 drives, pulse and photo-eye sensors, CompactLogix processor, servo motor controllers and VFD's. Features a virtual axis for measuring pocket length on the merging conveyor and generates pulse in specified inch increments of travel. Offered with continuous welds, stainless steel drives and drive mounts, stainless steel idle ends, washdown duty motors and reducers.

Read More »
Seven Foot (7') Side Grip Elevation Conveyor
Material Handling & Storage

Seven Foot (7') Side Grip Elevation Conveyor

Winneconne, WI - Multi-Conveyor (www.multi-conveyor.com) -  Multi-Conveyor recently built a mild steel, "S-style", side grip elevator - or "Gripper" - designed to transport filled, capped bottles of oil, to an over seven foot (7') elevation from infeed to discharge. Grippers are comprised of two parallel conveyors mounted side-by-side, with the Neoprene gripper bulb chains facing one...

Read More »
Multi-Conveyor Introduces Rotary Accumulation Table with a Washdown Grade Motor
Fluid & Gas Flow Equipment

Multi-Conveyor Introduces Rotary Accumulation Table with a Washdown Grade Motor

The new Rotary Accumulation Table is designed for bottle capper reject applications. The product features a 42 in. long straight running table top chain conveyor for accepting rejected bottles of a liquid food product that is to be dispensed onto 36 in. stainless steel rotary accumulation table. The rotary table is constructed of stainless steel with a mild-steel below mount motor assembly...

Read More »
New Overhead Plastic Chain Conveyor Comes with Rotary Spiral Accumulator
Material Handling & Storage

New Overhead Plastic Chain Conveyor Comes with Rotary Spiral Accumulator

The Overhead Plastic Chain Conveyor is constructed of stainless steel and is designed to feed a decline rotary drum spiral conveyor for various size glass jars. The unit accepts single file products from discharging de-palletizing machine. It allows the connection of multiple interconnected drum spirals for staging of high production lines. The spiral accumulators give the production line with...

Read More »
Multi-Conveyor Introduces Pet Food Conveyor with Narrow-Edge Leading Product Orientation
Material Handling & Storage

Multi-Conveyor Introduces Pet Food Conveyor with Narrow-Edge Leading Product Orientation

The Pet Food Conveyor is designed for individually wrapping pet food products. The unit utilizes vibration for settling and VFD’s for controlling speed throughout the process. It offers a speed (singulate) of 180 to 200 parts per minute. The conveyor’s vibration helps in the separation of individual pieces for single filling prior to a right angle transfer. It is equipped with a...

Read More »
Alpine Style Conveyor Reduces Downtown and Maximizes Production
Material Handling & Storage

Alpine Style Conveyor Reduces Downtown and Maximizes Production

The alpine style accumulation conveyor solution recently built from Multi-Conveyor was designed using a combination of both automation and space minimization. The conveyor is able to detect and accept various sizes of bottled salad dressings. It is controlled by photo-eyes and the machinery contains proximity switches, solenoids and filter regulators. The conveyor has the ability to smoothly move...

Read More »

All Topics