Nidec-Shimpo Corporation

PC-QD 1/8 DIN Process Counter/Totalizer features anti-jitter circuits.

PC-QD 1/8 DIN Process Counter/Totalizer features anti-jitter circuits.

PC-QD 1/8 DIN Process Counter/Totalizer is used to display position, length, or angle in units such as ft, cm or degrees. Unit’s data can be stored in non-volatile memory during power cut and offers A & B quadrature signals. Totalizer offers RS-232, RS-485 and USB communication protocol and comes with an optional 8 A contact or 120 mA solid state relay outputs. Product provides analog process...

Read More »
PC-AN 1/8 DIN Process Counter/Totalizer offers RS-232 and RS-485 communication option.
Display & Presentation Equipment

PC-AN 1/8 DIN Process Counter/Totalizer offers RS-232 and RS-485 communication option.

PC-AN 1/8 DIN Process Counter/Totalizer is used to display six digits of 0-1 mA, 4-20 mA or 0-10 V analog process signal inputs. Unit offers USB communication protocol and comes with an optional 8 A contact or 120 mA solid state relay outputs. Product can also display flow rates in gallons/minute or liters/sec or volumes in gallons or liters and power consumption in kilowatts. Totalizer provides...

Read More »
PC-FR 1/8 DIN Process Counter/Totalizer features decimal point 6 digit display.
Display & Presentation Equipment

PC-FR 1/8 DIN Process Counter/Totalizer features decimal point 6 digit display.

PC-FR 1/8 DIN Process Counter/Totalizer comes with a front panel pushbutton. Unit is suitable for displaying AC line frequencies up to 250 V ac, RPM monitoring, speed detection of proximity switches and flow rate from turbine meter inputs down to 12 mV. Product offers RS-232, RS-485 and USB communication options and features optional 8 A contact or 120 mA solid state relay outputs. Totalizer’s...

Read More »
DT-501X Process Panel Meter Tachometer is enhanced with teaching function.

DT-501X Process Panel Meter Tachometer is enhanced with teaching function.

Featuring 0.87 in. height display and compact body depth of only 3.6 in., DT-501X Process Panel Meter Tachometer is suitable in automation applications including machining operation timing, conveyor speed, motor output, volumetric flowrate and elapsed time of oven curing. Unit can be operated in tachometer, flowmeter, process time span and elapsed time modes. Tachometer accepts inputs such as...

Read More »
1/8 DIN Temperature Meters offer read rate of 60 conversions per second.

1/8 DIN Temperature Meters offer read rate of 60 conversions per second.

Available in PM-THC and PM-RTD models, 1/8 DIN Temperature Meters are designed for process temperature monitoring and automated control applications. With 1° or 0.1° resolution, PM-THC model is set to accept J, K, T, E, N, R and S thermocouple, whereas PM-RTD model adjustable 1°, 0.1° or 0.01° resolution accepts four platinum, two nickel and two copper RTD inputs. Offering AC or DC power...

Read More »
Digital Torque Tester offers one touch operation.

Digital Torque Tester offers one touch operation.

Suited for all types of QC/QA/R&D and production testing, TNP series provides one button data recording, zeroing, and set-up for next test. It offers clockwise and/or counterclockwise torque testing for bottles, containers, valves, solenoids, and rotary switches, and graphically displays distribution curve for peak, max, min, avg, and standard deviation on PC through USB. Product comes with...

Read More »

Gauges provide force testing for variety of industries.

Ergonomically designed DART 2.0 FGV-XY Series is suited for incoming quality inspection, finished goods testing, research and development, and other force-related applications. USB port and 1,000 point memory allows for data export in real-time or after testing is complete. With reversible display, user can read gauge in both handheld and test stand mounted positions.

Read More »
Laser Tachometer has USB and data storage capabilities.

Laser Tachometer has USB and data storage capabilities.

Usable in contact applications from 0.8-25,000 rpm and non-contact applications from 6.0-99,999 rpm, all-metal DT-209X offers simultaneous storage of data in 3 different measuring modes: USB, standard, and average. Users can download features and online controls, show trending and real-time data via USB communication, and access data via included software. Unit features programmable 1 V analog...

Read More »

Hand Held Laser Tachometer offers detection up to 14 ft.

Suited for contact and non-contact applications, Model DT-209X simultaneously stores data in USB, standard, and average measuring modes. Device offers length and rate measurement; selectable units of measure; data calculation for last, min, max, and average readings; and smart settings for trigger, max, and min limits. Housed in aluminum enclosure, tachometer includes 5-digit display, Â-¼ x...

Read More »
PC-QD 1/8 DIN Process Counter/Totalizer features anti-jitter circuits.

PC-QD 1/8 DIN Process Counter/Totalizer features anti-jitter circuits.

PC-QD 1/8 DIN Process Counter/Totalizer is used to display position, length, or angle in units such as ft, cm or degrees. Unit’s data can be stored in non-volatile memory during power cut and offers A & B quadrature signals. Totalizer offers RS-232, RS-485 and USB communication protocol and comes with an optional 8 A contact or 120 mA solid state relay outputs. Product provides analog process...

Read More »
PC-AN 1/8 DIN Process Counter/Totalizer offers RS-232 and RS-485 communication option.
Display & Presentation Equipment

PC-AN 1/8 DIN Process Counter/Totalizer offers RS-232 and RS-485 communication option.

PC-AN 1/8 DIN Process Counter/Totalizer is used to display six digits of 0-1 mA, 4-20 mA or 0-10 V analog process signal inputs. Unit offers USB communication protocol and comes with an optional 8 A contact or 120 mA solid state relay outputs. Product can also display flow rates in gallons/minute or liters/sec or volumes in gallons or liters and power consumption in kilowatts. Totalizer provides...

Read More »
PC-FR 1/8 DIN Process Counter/Totalizer features decimal point 6 digit display.
Display & Presentation Equipment

PC-FR 1/8 DIN Process Counter/Totalizer features decimal point 6 digit display.

PC-FR 1/8 DIN Process Counter/Totalizer comes with a front panel pushbutton. Unit is suitable for displaying AC line frequencies up to 250 V ac, RPM monitoring, speed detection of proximity switches and flow rate from turbine meter inputs down to 12 mV. Product offers RS-232, RS-485 and USB communication options and features optional 8 A contact or 120 mA solid state relay outputs. Totalizer’s...

Read More »
DT-501X Process Panel Meter Tachometer is enhanced with teaching function.

DT-501X Process Panel Meter Tachometer is enhanced with teaching function.

Featuring 0.87 in. height display and compact body depth of only 3.6 in., DT-501X Process Panel Meter Tachometer is suitable in automation applications including machining operation timing, conveyor speed, motor output, volumetric flowrate and elapsed time of oven curing. Unit can be operated in tachometer, flowmeter, process time span and elapsed time modes. Tachometer accepts inputs such as...

Read More »
1/8 DIN Temperature Meters offer read rate of 60 conversions per second.

1/8 DIN Temperature Meters offer read rate of 60 conversions per second.

Available in PM-THC and PM-RTD models, 1/8 DIN Temperature Meters are designed for process temperature monitoring and automated control applications. With 1° or 0.1° resolution, PM-THC model is set to accept J, K, T, E, N, R and S thermocouple, whereas PM-RTD model adjustable 1°, 0.1° or 0.01° resolution accepts four platinum, two nickel and two copper RTD inputs. Offering AC or DC power...

Read More »
Digital Torque Tester offers one touch operation.

Digital Torque Tester offers one touch operation.

Suited for all types of QC/QA/R&D and production testing, TNP series provides one button data recording, zeroing, and set-up for next test. It offers clockwise and/or counterclockwise torque testing for bottles, containers, valves, solenoids, and rotary switches, and graphically displays distribution curve for peak, max, min, avg, and standard deviation on PC through USB. Product comes with...

Read More »

Gauges provide force testing for variety of industries.

Ergonomically designed DART 2.0 FGV-XY Series is suited for incoming quality inspection, finished goods testing, research and development, and other force-related applications. USB port and 1,000 point memory allows for data export in real-time or after testing is complete. With reversible display, user can read gauge in both handheld and test stand mounted positions.

Read More »
Laser Tachometer has USB and data storage capabilities.

Laser Tachometer has USB and data storage capabilities.

Usable in contact applications from 0.8-25,000 rpm and non-contact applications from 6.0-99,999 rpm, all-metal DT-209X offers simultaneous storage of data in 3 different measuring modes: USB, standard, and average. Users can download features and online controls, show trending and real-time data via USB communication, and access data via included software. Unit features programmable 1 V analog...

Read More »

Hand Held Laser Tachometer offers detection up to 14 ft.

Suited for contact and non-contact applications, Model DT-209X simultaneously stores data in USB, standard, and average measuring modes. Device offers length and rate measurement; selectable units of measure; data calculation for last, min, max, and average readings; and smart settings for trigger, max, and min limits. Housed in aluminum enclosure, tachometer includes 5-digit display, Â-¼ x...

Read More »

All Topics