Siemens Industry - Digital Factory - Machine Tool Systems

Latest SGT-800 Gas Turbines Deliver 3.5 Percent More Efficiency Than Simple Cycle Gas Turbines
Mechanical Power Transmission

Latest SGT-800 Gas Turbines Deliver 3.5 Percent More Efficiency Than Simple Cycle Gas Turbines

Siemen offers SGT-800 gas turbines with performance enhancement. This enhancement is applied on turbines with 43-47.5-MW ratings. The new upgrade enables owners to reduce fuel usage and CO₂ emissions. Units are now offered with improved compressor blade design for increasing aerodynamic performance, optimized gas path mass flow and component cooling in the turbine section. SGT-800 turbines...

Read More »
New Simit V10 Simulation Software Comes with Dongle Concept for Enhanced Scalability
Software

New Simit V10 Simulation Software Comes with Dongle Concept for Enhanced Scalability

Siemens’ Simit V10 Simulation Software is offered with libraries, component type editor, virtual controllers and support for S7 Redundancy Protocol. Simit V10 allows isosynchronous coupling between the virtual PLC and simulation model. The software enables the creation of real-time simulation environments to test mechatronic models, behavioral sensor and actuator models. Simit V10 allows...

Read More »
Latest Sitrans P320/420 Pressure Transmitter Features Four-button Programming and Namur NE107 Support
Electrical Equipment & Systems

Latest Sitrans P320/420 Pressure Transmitter Features Four-button Programming and Namur NE107 Support

Siemens’s Sitrans P320/420 pressure transmitters offer remote safety handling to reduce commissioning time during application requiring functional safety. The transmitters have a large display, low maintenance cost and high accuracy. These devices are ideal for industries such as chemical, oil and gas and power generation. The products meet the requirement of IEC 61508 and provide data logging...

Read More »
Siemens's Latest TIA Portal V15 is Designed for Simulation and Commissioning
Software

Siemens's Latest TIA Portal V15 is Designed for Simulation and Commissioning

TIA Portal V15 is (Totally Integrated Automation Portal) helps in improving digital designing of work processes. This portal focuses on Simatic S7-1500R/H controllers, Sinamics S210 drive integration, Multiuser Engineering, software units and OPC UA functions. The commissioning of S7-1500 controllers is simplified and using the TIA portal. The TIA offers standardized operating procedure for...

Read More »
New Simatic Energy Manager Basic V7.1 App Features Customized Design of Dashboards and Reports
Software

New Simatic Energy Manager Basic V7.1 App Features Customized Design of Dashboards and Reports

Simatic Energy Manager Basic V7.1 Energy Management App provides interface to Simatic S7 Energy Efficiency Monitor to assess the machine and plant efficiencies. The app is designed for iOS and Android, which allows user to record the data of energy consumed. The App provides energy transparency using web-based engineering and data connection and communicates with MindSphere, cloud-based and open...

Read More »
Sinamics S210 Servo Drive System enables easier motion control for machine builders.
Controls & Controllers

Sinamics S210 Servo Drive System enables easier motion control for machine builders.

The Sinamics S210 Servo Drive System is offered in 50-750 watts and designed for use with Simotics S-1FK2 motors using a one cable connection. The Sinamics S210 features extended motion control and enables rapid engineering through motion technology in Simatic S7-1500 controllers.  Other features include one-button tuning and integrated safety functions. Applications include packaging, handling,...

Read More »
Beckwood Partners with Siemens to Produce Hydraulic Press, QDC Workcells
Machinery & Machining Tools

Beckwood Partners with Siemens to Produce Hydraulic Press, QDC Workcells

Machine builder develops fully automated die handling system with 15,000-pound capacity to load and unload presses with staging tables for continuous production; die change time reduced from two hours to ten minutes Beckwood Corporation in Fenton, Missouri (St. Louis) is a leading manufacturer of custom hydraulic presses, automation systems and the Triform line of precision forming equipment....

Read More »
Latest SGT-800 Gas Turbines Deliver 3.5 Percent More Efficiency Than Simple Cycle Gas Turbines
Mechanical Power Transmission

Latest SGT-800 Gas Turbines Deliver 3.5 Percent More Efficiency Than Simple Cycle Gas Turbines

Siemen offers SGT-800 gas turbines with performance enhancement. This enhancement is applied on turbines with 43-47.5-MW ratings. The new upgrade enables owners to reduce fuel usage and CO₂ emissions. Units are now offered with improved compressor blade design for increasing aerodynamic performance, optimized gas path mass flow and component cooling in the turbine section. SGT-800 turbines...

Read More »
New Simit V10 Simulation Software Comes with Dongle Concept for Enhanced Scalability
Software

New Simit V10 Simulation Software Comes with Dongle Concept for Enhanced Scalability

Siemens’ Simit V10 Simulation Software is offered with libraries, component type editor, virtual controllers and support for S7 Redundancy Protocol. Simit V10 allows isosynchronous coupling between the virtual PLC and simulation model. The software enables the creation of real-time simulation environments to test mechatronic models, behavioral sensor and actuator models. Simit V10 allows...

Read More »
Company News

Siemens Realizes Digital Transformation of the Process Industry with Digital Enterprise

 Technical conditions in place for digital transformation of the process industry  New and existing plants of any size capable of digitalization Digital twin for greater flexibility, efficiency, quality and shorter time to market The digital transformation of the process industry is in full swing. At the Achema 2018, Siemens will be exhibiting under the banner “Accelerate the digital...

Read More »
Company News

Siemens and Evonik Agree Technology Partnership for Data Management in Comos

 Integration of Evonik asset life cycle data model into Comos  Partnership includes the integration and support of the whole engineering and operation process Siemens und Evonik are to enter into a technology partnership. Its aim is the development of an asset life cycle data model and its integration into the Siemens software solution Comos. The asset life cycle data model was developed by...

Read More »
Company News

Siemens and Bentley Systems Found the Process Industries Academy

 Siemens and Bentley are driving digital enterprise forward with the Process Industries Academy  Best practice approaches for plant engineering and operation  Training at the first academy will commence in the second half of 2018 in Karlsruhe The Siemens Divisions Process Industries and Drives (PD) and Digital Factory (DF) together with Bentley Systems and the Bentley Institute are driving...

Read More »
Company News

Siemens, PSE to Collaborate on Model-Based Solutions

Strategic collaboration of Siemens and PSE extends integrated digitalization portfolio for process industries Close linkage of Comos, Simatic PCS 7 and Simit with PSE’s gPROMS Advanced Process Modelling technology Integrated use of Advanced Process Modelling along plant lifecycle Model-based solutions are essential complements of the Siemens portfolio Siemens AG and Process Systems Enterprise...

Read More »
Latest Sitrans P320/420 Pressure Transmitter Features Four-button Programming and Namur NE107 Support
Electrical Equipment & Systems

Latest Sitrans P320/420 Pressure Transmitter Features Four-button Programming and Namur NE107 Support

Siemens’s Sitrans P320/420 pressure transmitters offer remote safety handling to reduce commissioning time during application requiring functional safety. The transmitters have a large display, low maintenance cost and high accuracy. These devices are ideal for industries such as chemical, oil and gas and power generation. The products meet the requirement of IEC 61508 and provide data logging...

Read More »
Company News

Siemens Gamesa Secures €2.5 Billion Multi-Currency Term and Revolving Credit Facility

The transaction has been signed with a syndication of international financial entities and will expire in 2023. Siemens Gamesa Renewable Energy has signed a €2.5 billion multi-currency term and revolving credit facility, enhancing its long-term financial structure. The facility was signed with a syndication of international financial entities and replaces the company’s €750 million credit...

Read More »
Company News

Siemens and Northvolt Partner in Next Generation Lithium-Ion Battery Cell Production

Siemens to offer Northvolt its Digital Enterprise portfolio that enables the digitization of the entire value chain – from the design of the battery cell to production and services Siemens will support the technology partnership through an investment of EUR 10 million After production start, Northvolt will become a preferred supplier for lithium-ion batteries for Siemens Siemens and Northvolt...

Read More »

All Topics