International Manufacturing Services, Inc.
Portsmouth, RI 02871
Surface Mount Chip Resistors suit high-voltage applications.
Offered in sizes 0402-2512, HVI Series is comprised of chip resistors with values to 1 GW and tolerances to 1% that are suited for high-voltage applications. Nickel barrier layer optimizes solder leach resistance, and proprietary thick film architecture allows 2512 size to withstand 3 kV continuous and 4 kV overload. Applications include power supplies, power converters, defibrillators, sensors,...
Read More »
Thin Film Attenuator is packaged for face-down mounting.
Packaged face-down in tape for continuous mounting with pick-and-place machinery, 0805-sized attenuator IMS1141 is available with values from 0-10 dB and features RoHS-compliant nickel barrier layer terminals with 100% matte tin finish. Face down mounting minimizes reflection and helps ensure optimal performance to 20 GHz, depending on application. Product has 50-piece MOQ for cut tape and...
Read More »
Chip Attenuator suits RF and microwave applications.
Model VGX-2010WA dissipates 20 W at 100-
Read More »
Power Splitters have 6 dB of evenly split attenuation.
Available with 50 or 75 W impedance, IPS seried of 1 W, 2-way resistive power splitters operate from DC to 20 GHz, have attenuation accuracy of -
Read More »
IMS Introduces New B-Series Therma-Bridge, Thermal Management Device
For Release February 5, 2008 Portsmouth, Rhode Island, USA- International Manufacturing Services, Inc. (IMS) introduces the B-Series Therma-Bridge as a simple and cost effective thermal management device. The B-Series Therma-Bridge uses a thermally-conductive Aluminum Nitride chip with metalized terminals to transport heat from one location to another, thus enhancing overall board performance....
Read More »
Power Divider features alumina construction.
Model IMD2365 Thick Film Two Way Microstrip Wilkinson Power Divider operates at 6 GHz with 20% bandwidth at less than 0.5 dB insertion loss. Divider features alumina construction, conductivity films, and -¼ wave design contained within 3020 package. Unit offers an input power rating of 20 W with 100-
Read More »
SMT Thick Film Attenuators are available from 1-70 dB.
Suited for RF/microwave applications and communications-oriented circuitry, IMA2391 is operational to 15 GHz in properly matched, continuous 50 ohm system. Architecture is characterized by alumina substrate with solderable input terminals on top. Available in 1 dB increments over its entire range, with tolerance as low as -
Read More »
Thick Film Resistor provides high ohmic values.
Manufactured using high volume, thick film printing process, Model HCC 2010 offers 45 GΩ of resistance at tolerance of 10% on alumina substrate. Measuring .197 x .106 x .028 in., unit is suited for applications requiring high degree of terminations metals including platinum silver and platinum silver with solder coating. High precision applications include measurement test instrumentation,...
Read More »
Hybrid Coupler suits RF/microwave and telecom applications.
Quadrature 3 dB Coupler, Model IMD 2297 operates at 6 GHz with bandwidth of 10%. Typical VSWR in matched 50 Ohm alumina system is 1.25:1 or better with input isolation of 18 dB or better. Measuring .322 x .322 x .025 in., surface mount, thick film unit on aluminum nitride substrate features .205 in. terminal spacing and input power up to 20 W, depending on base plate temperature.
Read More »
Low Pass SMT Filter suits RF and microwave applications.
Measuring .442 x .184 x .030 in., S Band 2.4 GHZ planar surface mountable thick film filter features passband up to 2,500 MHz with passband ripple of .01 dB. Second and third harmonic rejection is 25 dB min, and VSWR is 1.1:1. Compact unit, which incorporates 5 sections with 50 ohm input and output, is suited for applications such as wireless local area networks, microwave communication links,...
Read More »IMS Releases Short Form Products Catalog; Tomorrow's Passive Components - Today!
Portsmouth, Rhode Island, USA - International Manufacturing Services, Inc. (IMS), a leading manufacturer and supplier of high quality thick film resistors, terminations, attenuators, couplers, thermal management devices, planar dividers and planar filters to the electronics industry, has released their new, comprehensive, color catalog of passive components, showing the full range of IMS' product...
Read More »
Surface Mount Chip Resistors suit high-voltage applications.
Offered in sizes 0402-2512, HVI Series is comprised of chip resistors with values to 1 GW and tolerances to 1% that are suited for high-voltage applications. Nickel barrier layer optimizes solder leach resistance, and proprietary thick film architecture allows 2512 size to withstand 3 kV continuous and 4 kV overload. Applications include power supplies, power converters, defibrillators, sensors,...
Read More »IMS Announces the Appointment of E.G. Holmes as Its Dixie States Representative
Portsmouth, Rhode Island, USA - International Manufacturing Services, Inc. (IMS), a leading manufacturer and supplier of high quality thick and thin film resistors, terminations, attenuators, planar dividers, planar filters and thermal management devices to the electronics industry, announces the appointment of E.G. Holmes as its Dixie States representative. E. G. Holmes and Associates, Inc. was...
Read More »
Thin Film Attenuator is packaged for face-down mounting.
Packaged face-down in tape for continuous mounting with pick-and-place machinery, 0805-sized attenuator IMS1141 is available with values from 0-10 dB and features RoHS-compliant nickel barrier layer terminals with 100% matte tin finish. Face down mounting minimizes reflection and helps ensure optimal performance to 20 GHz, depending on application. Product has 50-piece MOQ for cut tape and...
Read More »
Chip Attenuator suits RF and microwave applications.
Model VGX-2010WA dissipates 20 W at 100-
Read More »
Power Splitters have 6 dB of evenly split attenuation.
Available with 50 or 75 W impedance, IPS seried of 1 W, 2-way resistive power splitters operate from DC to 20 GHz, have attenuation accuracy of -
Read More »
IMS Introduces New B-Series Therma-Bridge, Thermal Management Device
For Release February 5, 2008 Portsmouth, Rhode Island, USA- International Manufacturing Services, Inc. (IMS) introduces the B-Series Therma-Bridge as a simple and cost effective thermal management device. The B-Series Therma-Bridge uses a thermally-conductive Aluminum Nitride chip with metalized terminals to transport heat from one location to another, thus enhancing overall board performance....
Read More »IMS Announces the Appointment of Jay Stone Associates as Its Northern California Representative
Portsmouth, Rhode Island, USA - International Manufacturing Services, Inc. (IMS), a leading manufacturer and supplier of high quality thick film resistors, terminations, attenuators, planar dividers and planar filters to the electronics industry, announces the appointment of Jay Stone Associates of San Jose as its Northern California representative. Since 1959, Jay Stone Associates has been one...
Read More »IMS Announces Appointment of Votron Electronics as Its Canadian Representative
IMS Announces Appointment of Votron Electronics as its Canadian Representative Portsmouth, Rhode Island, USA - International Manufacturing Services, Inc. (IMS), a leading manufacturer and supplier of high quality thick film resistors, terminations, attenuators, planar dividers and planar filters to the electronics industry, announces the appointment of Votron Electronics as its representative for...
Read More »IMS Launches New Interactive Website
Portsmouth, Rhode Island, USA - International Manufacturing Services, Inc. (IMS), a leading manufacturer of thick film resistors, attenuators, terminations, planar dividers and planar filters announces the launch of their new, interactive web site, at www.ims-resistors.com. The new website features detailed information about all IMS products, including test data, S-parameters, and RoHS/WEEE...
Read More »