DeWAL
Narragansett, RI 02882
Silicone-Free Tapes target aerospace composite industry.
Suited for low out-gassing applications requiring EMS 595, High Temperature Silicon-Free Adhesive Tapes include DW915-1 and DW915-2 polyester tapes for composite Lay-up; DW716-2HD PTFE tape for use as composite tool coat; DW379 printable glass tape for aerospace blanket seaming; and DW417 consisting of flexible dead soft foil supplied on release liner, suitable as heat shield tape. All are...
Read More »
DeWAL Industries Introduces a Line of Silicone-Free Adhesive Tapes for Aerospace
DeWAL Industries introduces a new line of High Temperature, Silicone-free adhesive tapes for the Aerospace Composite Industry.Â- The tapes are ideal for low out-gassing applications as they pass ASTM-E595-07 outgassing and are the clear option when silicone contamination is of concern. The trio includes a woven glass tape DW379, a foil/glass laminate tape DW417 and a red polyester tape...
Read More »HVOF Masking Compound handles complex and difficult jobs.
Providing protection from HVOF and plasma spray, BlueShield can be shaped and molded to cover odd-shaped areasÂ- as well as close off and protect areas which should not be treated. Single-step application process involves masked part undergoing 25 min curing cycle at 250°F. Resulting shield, ready for coating, is resistant to abrasion, similar to hard rubber, and can be peeled...
Read More »
UHMW-PE Tapes and Film feature skived, thin gage design.
Put through densification process, abrasion-resistant DW 400 Film provides tensile strength of 21,000 psi, particularly important for hoses, rubber belting, and chute linings. Pressure-sensitive DW 423-5EZ Tape has aggressive permanent acrylic adhesive and no release liner, while optically clear DW 424-4 Tape features permanent acrylic adhesive, and comes in rolls on release liner. DW 424-4 is...
Read More »
HVOF Masking Tape withstands high temperature, pressure.
Resistant to extreme plasma spraying, pressure-sensitive D-Max masks products during hot, abrasive high velocity oxygen-fuel (HVOF) thermal spraying. This flexible and abrasion-resistant tape, exhibiting adhesion of 55 oz/in., conforms to irregular shapes to form protective mask against grit blast, ceramic spraying, plasma spraying, and arc spraying. Tested to temperatures over 1,000°F and...
Read More »PTFE-Coated Tape targets machinery rollers.
Designed to minimize friction and wear on high-speed extrusion coating equipment, pressure-sensitive DW 663 combines filled PTFE film with high-temperature silicone adhesive. Product is orange/brown in color and available in widths from 0.25-20 in. and 36 yard lengths. With temperature tolerance up to 500°F, tape is suitable for wrapping rollers that produce polyethylene coatings and...
Read More »
DeWAL offers PTFE-Coated Aluminum Tape
PTFE-coated aluminum reduces friction and wear in dynamic applications. Saunderstown, RI, May 15, 2008 - DeWAL Industries, Inc. is now manufacturing a PTFE-coated foil that combines a thin layer of PTFE with 0.005 thick aluminum foil. The aluminum is coated on the other side with a pressure sensitive silicone adhesive for a sure grip on metal, glass or ceramic surfaces. The result, D/W 351, is a...
Read More »DeWAL Industries to Exhibit Polyfluoride Films and Tapes at K 2007 Trade Fair in Dusseldorf
DeWAL will display PTFE and UHMW-PE for plastics and rubber Saunderstown, Rhode Island USA, July 17, 2007 - DeWAL Industries will feature its entire line of high performance skived, unsintered and expanded PTFE films and tapes at K 2007, a major plastics and rubber trade show to be held October 24 - 31 in Dusseldorf, Germany. The DeWAL Industries booth - Hall 7, Booth 72E03 - will be manned by...
Read More »
PTFE Tapes are available with choice of adhesive backing.
Offered in widths from 0.500-12.00 in., DW 602BT tapes consist of PTFE compounded with direct coat acrylic or silicone pressure-sensitive adhesive. Chemically inert, stable, abrasion-resistant, and non-toxic products feature smooth, self-lubricating surfaces and peel-off release liners. Engineered to reduce friction and appropriate for linear slide bearing applications, tapes exhibit wear...
Read More »
UHMW Polymer Tape suits automotive applications.
Made of UHMW-PE (ultra high molecular weight polyethylene), UHMW automotive squeak and rattle tape is offered with direct coat acrylic or elastomeric adhesive; 3M or Avery transfer adhesive are also available. It conforms to plastic and metal surfaces, even in unusual shapes, to reduce noise without wearing out. Tape comes in widths from 0.25-26.0 in. and thicknesses of 3, 5, 10, and 20 mils and...
Read More »Rogers Acquires DeWAL Industries
Acquisition broadens Rogers' specialty materials leadership DeWAL highly complementary to Rogers' Elastomeric Material Solutions business Expansion into high performance polymer films, pressure sensitive tapes Accretive to 2017 earnings per share Rogers, Connecticut, November 23, 2016: Rogers Corporation (NYSE:ROG), a global leader in engineered material solutions, announces the...
Read More »
Silicone-Free Tapes target aerospace composite industry.
Suited for low out-gassing applications requiring EMS 595, High Temperature Silicon-Free Adhesive Tapes include DW915-1 and DW915-2 polyester tapes for composite Lay-up; DW716-2HD PTFE tape for use as composite tool coat; DW379 printable glass tape for aerospace blanket seaming; and DW417 consisting of flexible dead soft foil supplied on release liner, suitable as heat shield tape. All are...
Read More »
DeWAL Industries Introduces a Line of Silicone-Free Adhesive Tapes for Aerospace
DeWAL Industries introduces a new line of High Temperature, Silicone-free adhesive tapes for the Aerospace Composite Industry.Â- The tapes are ideal for low out-gassing applications as they pass ASTM-E595-07 outgassing and are the clear option when silicone contamination is of concern. The trio includes a woven glass tape DW379, a foil/glass laminate tape DW417 and a red polyester tape...
Read More »HVOF Masking Compound handles complex and difficult jobs.
Providing protection from HVOF and plasma spray, BlueShield can be shaped and molded to cover odd-shaped areasÂ- as well as close off and protect areas which should not be treated. Single-step application process involves masked part undergoing 25 min curing cycle at 250°F. Resulting shield, ready for coating, is resistant to abrasion, similar to hard rubber, and can be peeled...
Read More »DeWal Industries Exhibits at NPE2015: The International Plastics Showcase
Using only the highest quality resin blends, DeWAL has become an industry leader in the manufacture of high performance polymer films and pressure sensitive tapes. Our films are among the longest and widest splice free lengths in the industry. Visit us at booth S18069, South Hall, to view our products and ask about our customized solutions.
Read More »See DeWAL Industries, Booth 1309, at the International Thermal Spray Conference and Exposition, May 11-14 2015
See DeWal Industries at the world's foremost international conference and exposition for thermal spray technologists, researchers, manufacturers and suppliers. The program will feature the latest in advanced technology, research and development, and a wealth of resources where you can learn about processes that can be applied immediately to impact critical factors such as corrosion, wear and...
Read More »DeWAL Industries Announces Keith Gainey, Western Regional Sales Manager
Narragansett, RIÂ- – DeWAL Industries has increased sales coverage for the western half of the U.S. Keith Gainey has joined DeWAL’s Sales Team as the Sales Manager for the U.S., west of the Mississippi River. With over 35 years of sales and sales management experience in industrial and aerospace applications, and the last 6 years focusing on specification qualifications with aerospace...
Read More »DeWAL Industries Announces Lynne Russell, New England Sales Engineer
Narragansett, RIÂ- – DeWAL Industries has added additional Sales coverage for the New England area this month to encompass the full product line. Lynne Russell has joined DeWAL’s sales team. She is a graduate of URI with a BS in Business Management. She comes to DeWAL with an extensive background of over 20 years’ experience in sales and sales management. Her technical experience...
Read More »
UHMW-PE Tapes and Film feature skived, thin gage design.
Put through densification process, abrasion-resistant DW 400 Film provides tensile strength of 21,000 psi, particularly important for hoses, rubber belting, and chute linings. Pressure-sensitive DW 423-5EZ Tape has aggressive permanent acrylic adhesive and no release liner, while optically clear DW 424-4 Tape features permanent acrylic adhesive, and comes in rolls on release liner. DW 424-4 is...
Read More »
HVOF Masking Tape withstands high temperature, pressure.
Resistant to extreme plasma spraying, pressure-sensitive D-Max masks products during hot, abrasive high velocity oxygen-fuel (HVOF) thermal spraying. This flexible and abrasion-resistant tape, exhibiting adhesion of 55 oz/in., conforms to irregular shapes to form protective mask against grit blast, ceramic spraying, plasma spraying, and arc spraying. Tested to temperatures over 1,000°F and...
Read More »
