Honeywell Fire Group, Fire Control Instruments (FCI)
Westwood, MA 02090
Share:
Emergency Evacuation System features expandable design.
Working on 10 modules, E3 System extends beyond basic fire protection to provide emergency mass notification and evacuation. Peer-to-peer network operating at 625 KBaud, E3 can be arranged as Style 4 or Style 7 using 2 conductor unshielded wire or fiber cables. System includes network-enabled ILI-MB and ILI-S fire panels that can store 8 MB of memory, RPT-FO and RPT-UPT repeaters, and LCD-E3...
Read More »Smoke Detector uses reflective beam technology.
Suited for use in open areas with high ceilings, 4-wire System Sensor BEAM1224 Series is listed for operation from -22 to +131Ã-
Read More »Smoke Detectors suit open areas with high ceilings.
Consisting of transmitter/receiver and reflector, System Sensor BEAM1224 Reflective Beam Detectors are capable of sensing smoke where spot-type detectors are difficult to install and maintain. They include 4 standard sensitivity selections and 2 acclimate settings. Listed for operation from -22 to 131Ã-
Read More »Duct Smoke Sensors target HVAC applications.
Series ADP Low-Flow Photoelectronic Sensors detect smoke at air-speed velocities of 110-4,000 fpm, providing assistance in difficult smoke detection environments. Analog addressable units shut down fans, blowers, and air conditioning systems, preventing spread of toxic smoke and fire gases. Any sensitivity in sensors caused by dirt, temperature, or humidity is reported to panel, allowing...
Read More »Broadband delivers full-network control and communications.
NetSOLO Broadband provides digital messaging, live voice instructions, and fire fighter telephone communications through distributed network fire alarm system, all on single pair of wires. Expandable system incorporates existing 7100 panels. It uses Boolean logic programming and state-of-the-art digital signal processor.
Read More »Analog Smoke Sensors feature low flow technology.
Series ADP Photoelectronic Air Duct Smoke Sensors detect smoke at air-speed velocities of 110-4,000 fpm. By sampling air currents passing through ducts, units shut down fans, blowers, and air conditioning systems, preventing spread of toxic smoke and fire gases. Series includes Model ADP non-relay, 2-wire device requiring signaling line circuit power only and Model ADP-R 4-wire, relay unit...
Read More »Evacuation System delivers high-wattage amplification.
NetSOLOÃ-® CLASSIC enables fire detection; emergency, multi-channel voice evacuation; 2-way fire fighter communications; and building control applications. Assembled from 7100 NetSOLO and INCC-C Command Center nodes, product is capable of multiple sequences of operations and uses Field Configuration Program based on Boolean logic statements. Unit includes Ethernet Interface Module, and timing...
Read More »Fire Alarm System offers distributed audio capabilities.
NetSOLOÃ-® Broadband delivers full-network control and communications, digital messaging, live voice instructions, and fire fighter telephone communications through distributed network fire alarm system, all on single pair of wires. It incorporates existing 7100 panels and can be expanded to meet growing application demands. System uses Boolean logic programming and Digital Signal Processor.
Read More »Fire Control Panel has reporting features for DACT circuit.
Series 7100 multiprocessor-based fire control panel system comes with Windows-®-based Field Configuration Program (FCP-7100)/System Operating Software (SOS) v6.1. It enables control panel to read specific sensitivity level of each sensor and allows system to compensate for changes due to age, dust accumulation, or other environmental factors. Software includes 4 conditions viewable on display to...
Read More »Emergency Evacuation System features expandable design.
Working on 10 modules, E3 System extends beyond basic fire protection to provide emergency mass notification and evacuation. Peer-to-peer network operating at 625 KBaud, E3 can be arranged as Style 4 or Style 7 using 2 conductor unshielded wire or fiber cables. System includes network-enabled ILI-MB and ILI-S fire panels that can store 8 MB of memory, RPT-FO and RPT-UPT repeaters, and LCD-E3...
Read More »Smoke Detector uses reflective beam technology.
Suited for use in open areas with high ceilings, 4-wire System Sensor BEAM1224 Series is listed for operation from -22 to +131Ã-
Read More »Smoke Detectors suit open areas with high ceilings.
Consisting of transmitter/receiver and reflector, System Sensor BEAM1224 Reflective Beam Detectors are capable of sensing smoke where spot-type detectors are difficult to install and maintain. They include 4 standard sensitivity selections and 2 acclimate settings. Listed for operation from -22 to 131Ã-
Read More »Duct Smoke Sensors target HVAC applications.
Series ADP Low-Flow Photoelectronic Sensors detect smoke at air-speed velocities of 110-4,000 fpm, providing assistance in difficult smoke detection environments. Analog addressable units shut down fans, blowers, and air conditioning systems, preventing spread of toxic smoke and fire gases. Any sensitivity in sensors caused by dirt, temperature, or humidity is reported to panel, allowing...
Read More »Broadband delivers full-network control and communications.
NetSOLO Broadband provides digital messaging, live voice instructions, and fire fighter telephone communications through distributed network fire alarm system, all on single pair of wires. Expandable system incorporates existing 7100 panels. It uses Boolean logic programming and state-of-the-art digital signal processor.
Read More »Analog Smoke Sensors feature low flow technology.
Series ADP Photoelectronic Air Duct Smoke Sensors detect smoke at air-speed velocities of 110-4,000 fpm. By sampling air currents passing through ducts, units shut down fans, blowers, and air conditioning systems, preventing spread of toxic smoke and fire gases. Series includes Model ADP non-relay, 2-wire device requiring signaling line circuit power only and Model ADP-R 4-wire, relay unit...
Read More »Evacuation System delivers high-wattage amplification.
NetSOLOÃ-® CLASSIC enables fire detection; emergency, multi-channel voice evacuation; 2-way fire fighter communications; and building control applications. Assembled from 7100 NetSOLO and INCC-C Command Center nodes, product is capable of multiple sequences of operations and uses Field Configuration Program based on Boolean logic statements. Unit includes Ethernet Interface Module, and timing...
Read More »Fire Alarm System offers distributed audio capabilities.
NetSOLOÃ-® Broadband delivers full-network control and communications, digital messaging, live voice instructions, and fire fighter telephone communications through distributed network fire alarm system, all on single pair of wires. It incorporates existing 7100 panels and can be expanded to meet growing application demands. System uses Boolean logic programming and Digital Signal Processor.
Read More »Fire Control Panel has reporting features for DACT circuit.
Series 7100 multiprocessor-based fire control panel system comes with Windows-®-based Field Configuration Program (FCP-7100)/System Operating Software (SOS) v6.1. It enables control panel to read specific sensitivity level of each sensor and allows system to compensate for changes due to age, dust accumulation, or other environmental factors. Software includes 4 conditions viewable on display to...
Read More »